Smeg PA64SX Specifications Sheet

FINISH Polished Stainless Steel (No.7)

18/10 grade, 1mm gauge

SIZE 596mmW x 510mm x 88mmH

(38mmH bench top displacement) INSTALLATION Built-in one piece hob CAPACITY 30.7mj/hour max over four burners

•1x large rapid burner, 11.4 mj/hr max

•1x rapid burner, 8.6 mj/hr max

•1x semi rapid burner, 5.9 mj/hr max

•1x auxilary burner, 4.8 mj/hr max IGNITION Automatic electronic GAS INPUT • Set for natural gas, regulator supplied

• Adaptable for L.P.G., no regulator required ACCESSORIES Four independent stainless steel pot rests

(trivets)

SAFETY Flame failure device (FFD) fitted to each burner

GAS COOKTOP PA64SX

Code 9620

ERGONOMIC LAYOUT

By moving the controls to the front of the hob a more spacious layout is now available for utensil placement and movement from zone to zone and yet remain within the relatively compact 60cm cabinet space.

VERSALITILY

Three burners cater for the mid to high energy cooking needs include the use of large wok while the gentlest of simmers is perfectly achieved using the front position auxiliary burner.

ELECTRONIC IGNITION

The cooktop is connected with a one metre power cord.

• This socket can be without a connected 3 pin plug. Connect a 3 pin plug suitable for a standard 10 amp GPO located according to installation needs below the benchline. This supplies a continuous stored charge to spark the gas supply to the individual burner of your choice. Simply depress and turn the control knob of the desired cooking zone for flame ignition.

FLAME FAILURE

A flame failure device, FFD is fitted to each burner

assembly. The FFD ensures that should a flame be extinguished prematurely, for instance, by smothering or by a sudden air gust, the gas supply to the specific burner(s) is stopped within twelve seconds. For absolute safety the burners can only be reignited by physically resetting the control knob(s) to the ‘off’ position and then follow normal ignition procedure.

EASY CLEAN

The seamless hob design, using a single press stainless steel sheet, allows for easy wipe over maintenance. There are no gaps and difficult corners to clean. The burner assembles including the prominent stainless steel pot rests (trivets) keyhole into a stable “locked” position for cooking yet are easily removed for maintenance. Use cleaning agents that are neither abrasive nor contain chlorine based acids.

INSTALLATION

With only 38mm displacement into the benchtop, the cooktop allows for easy installation under the bench of either oven, dishwasher, cupboards or drawers.

WARRANTY

Smeg 60cm Four Burner, Automatic Ignition, Flame Failure Device

The Material. Polished stainless steel (Bright Anneal) is used exclusively for the exterior hob skin and burner assemblies. This stainless steel skin is brilliantly enhanced by being seamless and formed in a single step mould. The steel is one millimetre thick, stronger than a car bonnet, and is a guarantee for solidity and durability.

PIANO DESIGN

ID 050505

0 4

– 9

555 – 560

478 – 482

50 min

596

510

rapid

8.6mj/hr max

semi rapid

5.9mj/hr max

power

GAS

510

1.0 metre

gas inlet 1/2" BSP

596

large rapid

11.4mj/hr max

auxiliary

4.8mj/hr max

gas and 240 volt supply

NB allow 70mmW x 70mmD x 100mmH clearance below gas intake to accommodate natural gas regulator