– P34190-P34190H – THIRD PUMP KIT – EN
P31490 - P34190H
INSTALLATION INSTRUCTIONS
THIRD PUMP KIT FOR 4190 SERIES
READ CAREFULLY
This document relates to Smeg accessory P31490 - P34190H
The accessory may only be installed on Smeg devices. The kit allows use of the thir d extra detergent inlet.
For proper, safe use, this manual must be used together with the manual of the instrument or glassware
washer on which the accessory is installed.
Failure to read, any misunderstanding or incorrect interpretation of the instructions provided in this manual
may lead to misuse of the appliance, put the operator at risk and considerably reduce the appliance’s
performance.
The manufacturer declines all liability for uses other than those described in this manual.
Installation, maintenance and repairs must be carried out only by SMEG authorised staff.
In the event that the device is used in breach of the instructions provided by SMEG, the
manufacturer, the relative warranty rights could be forfeited.
The information in this manual is provided for guidance only. The contents and the equipment described may be
subject to change without notice.
19561006300 7/01/2014
Ed. Date
INFORMATION AND AFTER-SALES SERVICE FOR
SMEG INSTRUMENTS DIVISION PRODUCTS
Our Sales Department staff are able to provide you with information about prices and special offers.
Our After-Sales Department will be able to provide you with guidance about keeping your appliance functioning
correctly and put you in touch with your nearest authorised Service Centre.
instruments@smeg.it – service.instruments@smeg.it
Our entire product offering can be viewed at:
www.smeg-instruments.com
International customers, please contact your local SMEG distributor.
1
– P34190-P34190H – THIRD PUMP KIT – EN
1 KIT COMPOSITION (MAIN ITEMS)
A_
PERISTALTIC PUMP
B_
PUMP MOUNTING BRACKET
C_
INTAKE PIPE OR NOZZLE WITH LEVEL PROBE (
ON
P34190H
ONLY
).
N.B.: The blow-up diagram below does not show the metal fasteners (screws, washers, etc.).
2 MODEL COMPATIBILITY
The P34190 - P34190H accessory can be installed on the following series of Smeg washing devices.
P34190 - P34190H
Series which can be equipped
with the device
WD4190
GW4190
3 PRECAUTIONS
A_ Perform an appliance reset cycle.
B_ Disconnect the appliance from the electricity supply
C_ remove the detergent intake nozzles from the cans, and remove the cans from the appliance in
the case of 4190 appliances.
D_ disconnect the water outlet and inlet connections from the drain and supply systems.
2