Smeg Oven ALFA 31XHT Instruction Manual

INSTRUCTION MANUAL

Instructions for the User

INSTRUCTIONS FOR REMOVING THE ALFA 31XHT

OVEN FROM THE CABINET

DISCONNECT THE CABINET FROM THE ELECTRICAL MAINS

UNDO THE TWO SCREWS AS SHOWN BELOW
VIEW FROM

BELOW

TO REMOVE THE OVEN FROM

THE CABINET, UNDO THE TWO
M8 BOLTS IDENTIFIED BY THE
ARROWS

FRONT
VIEW

SUPPLY
OUTLET

Instruction for the user

EXTRACT THE PULL-OUT WORKTOP RIGHT OUT AND REMOVE

IT FROM THE CABINET, APPLYING LEVERAGE TO THE TWO
RAPID RELEASE DEVICES ON THE RUNNERS. (“A” AND “B”).

REMOVE THE OVEN, TAKING CARE NOT TO DAMAGE THE

INTERNAL WIRING
(IF THE OVEN IS PULLED TOO FAR OUT AT THIS STAGE, THE
VARIOUS CABINET COMPONENTS DIRECTLY CONNECTED TO
THE OVEN MAY NOT BE CORRECTLY DISCONNECTED).

Instructions for the User

Cod. 914772553

DISCONNECT THE TWO WIRES FROM THE TANGENTIAL

COOLING FAN IN THE TOP OF THE CABINET.

DISCONNECT THE OVEN POWER SUPPLY CABLE FROM THE

CABINET TERMINAL BOARD.

MAKE SURE THAT THERE ARE NO MORE CABLES DIRECTLY

CONNECTED TO THE OVEN AND THEN SCREW ITS FEET
(SUPPLIED WITH IT) INTO PLACE.

TO TURN ON THE TANGENTIAL COOLING FAN WITH THE OVEN
OFF, TURN THE TIMER TO THE SYMBOL AND THE OVEN
THERMOSTAT TO THE SYMBOL.