Smeg LSP1453N, LSP1453X1, LSP1453B, LSP1453X User Manual
INSTRUCTION MANUAL
GGUUIIDDEEFFOORRUUSSIINNGGTTHHEEDDIISSHHWWAASSHHEERRAANNDDTTHHEEWWAASSHHIINNGGPPRROOGGRRAAMMS
S
Contents
1. Description of the controls________________________________18
2. Troubleshooting _______________________________________30
Thank you for choosing one of our products.
You are advised to read this manual carefully; it contains all the
information you need about the right conditions for the proper, safe use
of your dishwasher.
The individual sections are laid out to provide you with a step-by-step
guide to all your appliance's functions; the texts are easy to understand
and are complete with detailed illustrations.
This user-friendly manual will provide answers to all your questions
about use of the dishwasher.
For any other information about use and maintenance of the dishwasher,
read the enclosed manual carefully.
USER INSTRUCTIONS: useful information is provided for the use of the
washing programs and all the dishwasher's functions.
User instructions
1. Description of the controls
1.1 Front panel
All the dishwasher control are grouped on the front panel.
1 ON/OFF
2 SELECTION PROGRAMS
3 DELAY PROGRAM
½ LOAD WASH
4
"3/1" OPTION
5 START/PAUSE
6 POWER ON
7 PROGRAMS
8 DELAY PROGRAM
9 ½ LOAD WASH
10 PHASES/PROGRAM
11 NO SALT
12 NO RINSE AID
13
RECESSED DOOR HANDLE
BUTTON
BUTTON (on some models only)
BUTTON (on some models only)
BUTTON (on some models only)
BUTTON
LIGHT
LIGHTS
LIGHTS (on some models only)
LIGHT (on some models only)
LIGHTS
LIGHT (on some models only)
LIGHT (on some models only)
BUTTONS
(P1...P5)
User instructions
For AAA 14 place-settings models only (see energy label)
PROGRAM SELECTION TYPE AND GRADE DIRT
PANS AND DISHES
SOAK
IN WAITING OF
COMPLETING
THE LOAD
PROGRESS
PROGRAM
Cold prewash
DURATION CONSUMPTION
MINUTES
(2)
WATER
LITRES (1)
POWER
KWh (2)
15 6 0,03
QUICK
ECO
DAILY
DISHES NOT MUCH DIRTY
AND WITH "FRESH DIRT"
WITHOUT RESIDUAL DRY
PANS AND DISHES
NOT VERY DIRTY BUT
WITH DRY RESIDUALS
PANS AND DISHES
WITH NORMAL DIRT,
WITHOUT DRY RESIDUAL
Wash at 38°C
Cold rinse
Rinse at 58°C
Wash at 55°C
Cold rinse
Rinse at 68°C
Dry
Wash at 65°C
Cold rinse
Rinse at 68°C
Dry
45 13 0,85
100 14 1,25
85 13 1,35
Wash at 70°C
STRONG
PANS AND DISHES
VERY DIRTY
Cold rinse
Rinse at 68°C
95 17 1,50
Dry
Cold prewash
DELICATE
+
DISHES
NOT VERY DIRTY
Wash at 45°C
Cold rinse
Rinse at 68°C
75 17 1,15
Dry
Cold prewash
BIO
(*)
+
PANS AND DISHES DIRTY
AND WITH DRY RESIDUALS
Wash at 55°C
Cold rinse
Rinse at 68°C
180 17 1,08
Dry
Cold prewash
NORMAL
+
PANS AND DISHES DIRTY
AND WITH DRY RESIDUALS
Wash at 65°C
Cold rinse
Rinse at 68°C
90 17 1,35
Dry
Prewash at 45°C
Wash at 70°C
Cold rinse
Rinse at 68°C
110 20 1,70
SUPER
PANS AND DISHES
+
VERY DIRTY AND WITH
DRY RESIDUALS
Dry
Only run the soak program with half loads.
The HALF LOAD - "3/1" option (4) is available for all programs except the soak program.
(*) Reference program as per EN 50242 standard.
(1) Average power consumption with the softener set on level 2.
(2) The cycle duration and power consumption may vary according to the water and room
temperatures, and the type and amount of dishes.
User instructions
For AAB 14 place-settings models only (see energy label)
PROGRAM SELECTION TYPE AND GRADE DIRT
PANS AND DISHES
SOAK
IN WAITING OF
COMPLETING
THE LOAD
PROGRESS
PROGRAM
Cold prewash
DURATION CONSUMPTION
MINUTES
(2)
WATER
LITRES (1)
POWER
KWh (2)
15 6 0,03
QUICK
ECO
DAILY
DISHES NOT MUCH DIRTY
AND WITH "FRESH DIRT"
WITHOUT RESIDUAL DRY
PANS AND DISHES
NOT VERY DIRTY BUT
WITH DRY RESIDUALS
PANS AND DISHES
WITH NORMAL DIRT,
WITHOUT DRY RESIDUAL
Wash at 38°C
Cold rinse
Rinse at 58°C
Wash at 55°C
Cold rinse
Rinse at 68°C
Dry
Wash at 65°C
Cold rinse
Rinse at 68°C
Dry
45 13 0,85
130 12 1,08
85 13 1,35
Wash at 70°C
STRONG
PANS AND DISHES
VERY DIRTY
Cold rinse
Rinse at 68°C
95 17 1,50
Dry
Cold prewash
DELICATE
+
DISHES
NOT VERY DIRTY
Wash at 45°C
Cold rinse
Rinse at 68°C
75 17 1,15
Dry
Cold prewash
BIO
(*)
+
PANS AND DISHES DIRTY
AND WITH DRY RESIDUALS
Wash at 55°C
Cold rinse
Rinse at 68°C
160 17 1,08
Dry
Cold prewash
NORMAL
+
PANS AND DISHES DIRTY
AND WITH DRY RESIDUALS
Wash at 65°C
Cold rinse
Rinse at 68°C
90 17 1,35
Dry
Prewash at 45°C
Wash at 70°C
Cold rinse
Rinse at 68°C
110 20 1,70
SUPER
PANS AND DISHES
+
VERY DIRTY AND WITH
DRY RESIDUALS
Dry
Only run the soak program with half loads.
The HALF LOAD - "3/1" option (4) is available for all programs except the soak program.
(*) Reference program as per EN 50242 standard.
(1) Average power consumption with the softener set on level 2.
(2) The cycle duration and power consumption may vary according to the water and room
temperatures, and the type and amount of dishes.
User instructions
For BAB 14 place-settings models only (see energy label)
PROGRAM SELECTION TYPE AND GRADE DIRT
PANS AND DISHES
SOAK
IN WAITING OF
COMPLETING
THE LOAD
PROGRESS
PROGRAM
Cold prewash
DURATION CONSUMPTION
MINUTES
(2)
WATER
LITRES (1)
POWER
KWh (2)
12 7 0,02
QUICK
ECO
(*)
DAILY
DISHES NOT MUCH DIRTY
AND WITH "FRESH DIRT"
WITHOUT RESIDUAL DRY
PANS AND DISHES
NOT VERY DIRTY BUT
WITH DRY RESIDUALS
PANS AND DISHES
WITH NORMAL DIRT,
WITHOUT DRY RESIDUAL
Wash at 38°C
Cold rinse
Rinse at 58°C
Wash at 55°C
Cold rinse
Rinse at 68°C
Dry
Wash at 65°C
Cold rinse
Rinse at 68°C
Dry
45 15 0,90
150 15 1,28
90 14 1,45
Wash at 70°C
STRONG
PANS AND DISHES
VERY DIRTY
2 cold rinses
Rinse at 68°C
90 20 1,60
Dry
Cold prewash
DELICATE
+
DISHES
NOT VERY DIRTY
Wash at 45°C
Cold rinse
Rinse at 68°C
80 20 1,20
Dry
Cold prewash
BIO
+
PANS AND DISHES DIRTY
AND WITH DRY RESIDUALS
Wash at 55°C
Cold rinse
Rinse at 68°C
105 20 1,35
Dry
Cold prewash
NORMAL
+
PANS AND DISHES DIRTY
AND WITH DRY RESIDUALS
Wash at 65°C
Cold rinse
Rinse at 68°C
95 20 1,40
Dry
Prewash at 45°C
Wash at 70°C
2 cold rinses
Rinse at 68°C
115 24 1,80
SUPER
PANS AND DISHES
+
VERY DIRTY AND WITH
DRY RESIDUALS
Dry
Only run the soak program with half loads.
The HALF LOAD - "3/1" option (4) is available for all programs except the soak program.
(*) Reference program as per EN 50242 standard.
(1) Average power consumption with the softener set on level 2.
(2) The cycle duration and power consumption may vary according to the water and room
temperatures, and the type and amount of dishes.
User instructions
TABLE FOR CERTIFICATION BODIES
Reference standard EN 50242
Reference program
Load 14 place-settings
Type of detergent B
Amount of detergent 35 g
Rinse aid setting 5/6
(*) Program
(*) Program
1.2 Washing programs
The dishwasher is equipped with a control panel, described in chapter
"1. Description of the controls", from which it is possible to carry out all
the power switch-on, switch-off and programming operations.
BIO (P3+P1) - models AAA-AAB
ECO (P3) - models BAB
Before starting a washing program make sure that:
• The water supply tap is
• The
• The baskets have been
• The spray arms are able to
• The dishwasher door is
LIGHTING
When the
and the light
PHASES/PROGRAM
correct amount of detergent
dispenser
obstruction.
.
ON/OFF
(6)
button
open.
has been added to the
correctly loaded.
rotate freely
securely closed
(1)
is pressed, the dishwasher switches on
comes on. About
(10)
lights
will come on.
and without
.
2 seconds
later, the
User instructions
y
PROGRAMMING
In this model of dishwasher, all programming procedures can only be
carried out with the door closed. As long as the door is open, the
PROGRAMS
off.
SELECTION PROGRAM
When the button relating to the program required is pressed, the relative
light will come on to confirm the operation.
START PROGRAM
To start the dishwasher, press the
seconds, until the light of the first phase of the selected program starts to
flash (confirmation beep).
lights
(7)
PHASES/PROGRAM
and
The program selection is possible
through the relative buttons
START/PAUSE
lights
button
(10)
(5)
will remain
(2)
.
for a few
As the program runs, the
the current cycle status.
Prewash
Wash
Rinse
Dr
PHASES/PROGRAM
lights
(10)
will indicate
The light of the phase in progress will
flash, while the lights of the previous and
subsequent phases remain on.
N.B.
during execution of programs which
do not include a prewash, the first
PHASES/PROGRAM
light
(10)
will remain
off.
User instructions
END PROGRAM
When the program finishes, a buzzer sounds
briefly and all the
(10)
flash.
PHASES/PROGRAM
lights
Press any of the
flashins, and the dishwasher is now ready to perform a new cycle;
opening and shutting the door or switching the appliance off and on has
the same effect.
INTERRUPTION OF A PROGRAM
In order to interrupt a running program it is necessary:
• press the
goes out;
• keep the button pressed until the
come on (confirmation buzzer).
SELECTION PROGRAMS
START/PAUSE
button
buttons
(5)
, the light of the current phase
PHASES/PROGRAM
(2)
, stops the light
lights
(10)
TO CHANGE A PROGRAM
To change the running program it is necessary:
• to interrupt the running program (see “
• select the new program;
• to press again the
program.
START/PAUSE
I
NTERRUPTION OF A PROGRAM
button
(5)
to make start the new
”);
User instructions
ANNULLING A PROGRAM
To annul the program in progress, it must first be interrupted (see
I
“
NTERRUPTION OF A PROGRAM
In case that the door is opened during the operation, to the next door
closing it is going to be necessary to start the program as shown in
paragraph “
which it was interrupted.
In case that the tub temperature is higher than 50°C the program
will start about 30 seconds later.
The washing cycle will not take place if the dishwasher door is left open
or not properly closed.
HALF LOAD WASH FUNCTION (on some models only)
Pressing button
only.
After selecting the program, proceed as follows:
• press the button
(the relative light comes on);
• press the button
wash status (the light goes out).
½ LOAD
The
soak
N.B.:
selecting the
S
program.
TART PROGRAM
½ LOAD WASH (4)
wash option can be selected in all programs
½ LOAD
”).
Now press buttons P1+P2 simultaneously and
the first three program lights will come on.
”. The program will resume from the point in
selects washing on the top basket
½ LOAD WASH (4)
½ LOAD WASH (4)
option changes the duration of the program.
once to select the top basket
again to return to full load
except the
It is possible to place a cutlery basket inside the basket selected for the
HALF-LOAD
WARNING: do not load dishes and cutlery into the non-selected
basket, because the water spray will only reach the selected basket.
program; the other basket
must remain empty.
User instructions
"3/1" OPTION BUTTON (on some models only)
(available in all programs except the soak program)
By pressing the button
the relative light comes on. This option has been studied for the use of
dishwashing powder or tablets with integrated substances in place of
regenerating salt or rinse-aid known on the market as “3 in 1” or “triple
action” products; in this case the dishwasher will use the product in an
optimal way avoiding salt and rinse-aid consumption, which could
already be found in the dishwasher.
Note:
When selecting the "
rinse-aid lights remain on, if their containers are empty.
DELAY PROGRAM (on some models only)
PROGRAM DELAY
The
the washing program by 3,
the dishwasher to work at your preferred time of day.
After selecting the delay, start the program (see relative section).
The appliance will prewash the dishes, after which the "program delay"
set previously will come into effect (the light corresponding to
hours
flashes).
(4)
you activate the "
3/1
" button, it is normal that the salt and
(3)
button
6 or 9 hours.
can be pressed to delay the start of
3/1
" option, confirmed when
This function allows you to set
3, 6
or
9
reset or change the delay
To
• press the
PHASES/PROGRAM
• press the
program delay” returns to zero (all the lights indicating the delay go
out);
• press the
START/PAUSE
DELAY PROGRAM
START/PAUSE
once the program has started:
(5)
lights
button
(10)
button
for a few seconds, until the
come on;
(3)
button
(5)
to start the new program.
several times “until the
User instructions
To set the delay once the program has started
If the program you wish to carry out is the same as the one already
in progress:
• press the
PHASES/PROGRAM
• annul the program in progress (see relative section) and wait for the
cycle to come to an end;
• select the program again;
• select the delay required;
• press the
If the program you wish to carry out is different from the one
already in progress:
• press the
PHASES/PROGRAM
• change the program;
• select the delay required;
• press the
dishwahser will pump out the water and restart with the delay set
and the new program.
START/PAUSE
lights
START/PAUSE
START/PAUSE
lights
START/PAUSE
button
button
(10)
button
(10)
button
(5)
come on;
(5)
to start the new program.
(5)
come on;
(5)
, proceed as follows.
for a few seconds, until the
for a few seconds, until the
to start the new program. The
User instructions
TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT
• Always try to run the dishwasher
• Do not wash the dishes in running water.
• Use the washing program that is
load.
• Do not carry out any preliminary rinsing.
• If available, connect the dishwasher to a hot water supply up to
60°C.
TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT
THE ENVIRONMENT
The phosphates contained in dishwasher detergents are harmful to the
environment. To avoid using excessive amounts of detergent and to
save on electricity, observe the following:
•
separate
resistant to aggressive detergents and high temperatures;
•
do not pour
the more delicate items from dishes that are more
the detergent directly on the dishes.
fully loaded
most appropriate
.
for each type of
REMOVING THE DISHES
At the end of the washing program, wait at least
removing the dishes, to allow them to cool down. To prevent any water
droplets on the upper basket from falling on the dishes in the lower
basket, it is
upper basket.
advisable
to unload the lower basket first, and then the
20 minutes
before
Loading...