Smeg LS647XNL2,LSA6448B2,LSA6448G2 Instruction Manual

INSTRUCTION MANUAL

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS

Contents

1

1. Description of the controls ________________________________ 3

2. Operating instructions ___________________________________ 15

3. Cleaning and maintenance _______________________________ 27

4. Troubleshooting _______________________________________ 31

Thank you for choosing one of our products.
You are advised to read this manual carefully; it contains all the
information you need about the right conditions for the proper, safe use
of your dishwasher.
The individual sections are laid out to provide you with a step-by-step
guide to all your appliance's functions; the texts are easy to understand
and are complete with detailed illustrations.
Recommendations are given for the correct use of the baskets, spray
arms, containers, filters, washing programs, and for operating the
controls.
Following the cleaning instructions provided here will keep your
dishwasher's performance at peak levels in the long term.
This user-friendly manual will provide answers to all your questions
about use of the dishwasher.

USER INSTRUCTIONS: these consist of recommendations for using the
appliance, a description of its controls and of the correct cleaning and
maintenance procedures.

User instructions

2

1. Description of the controls

1.1 Front panel

The ON/OFF is on the top edge of the panel, and all the dishwasher’s
other controls and monitoring devices are on the central display.
Programming and option selection are only possible with the door

closed.

NOTA:

The displays illustrated in the instruction manual are purely guideline;
symbols, programs and options may vary depending on the model
purchased.

User instructions

3

VERSION WITHOUT OPTIONS

1 ON/OFF BUTTON
2 SELECTION PROGRAMS BUTTON
3 START/PAUSE BUTTON
4 PROGRAMS LIGHTS
5 PHASES/PROGRAM LIGHTS

6

WATER HARDNESS ADJUSTMENT ON INDICATOR LIGHT

The light flashes to indicate that the appliance is in “water
hardness adjustment” mode.

SALT WARNIN LIGHT

Illumination of this light denotes a regenerating salt warning level.

7 NO RINSE AID LIGHT

User instructions

4

VERSION WITH OPTIONS

1 ON/OFF BUTTON
2 SELECTION PROGRAMS BUTTON
3 START/PAUSE BUTTON
4 PROGRAMS LIGHTS
5 PHASES/PROGRAM LIGHTS +

PROGRAM DELAY (if the option is included)

6

WATER HARDNESS ADJUSTMENT ON INDICATOR LIGHT

The light flashes to indicate that the appliance is in “water
hardness adjustment” mode.

SALT WARNIN LIGHT

Illumination of this light denotes a regenerating salt warning level.

7 NO RINSE AID LIGHT
8 OPTIONS (on some models only)

User instructions

5

<<OPTIONS(8)>>

Depending on the model, this zone may contain one or more of the
following options, identified by the relative symbols and described in
more detail in the relevant sections of the manual.
It is not possible to select any options when the soak program is being
used. All options except "Flexi Tabs" are disabled at the end of the
wash cycle. To disable the “Flexi Tabs” option, press the relative
button (the light goes out).

Flexi Tabs

Specifically for the use of products which contain salt and
rinse aid as well as detergent.

HYCLEAN

Adds a final antibacterial rinse to the selected program.

Spread HALF LOAD WASH

Allows washing of just a few dishes placed in both baskets.

PROGRAM DELAY

Allows the program to be set to start with a delay of 3, 6, 9 or
12 hours.

PROGRAMS TABLE

The manual contains the programs table for several models. To find the
table for your dishwasher, compare the program symbols at the top of the
table with those on your control panel.

User instructions

6

PROGRAMS TABLE

PROGRAMME

NUMBER

& SYMBOL

LOAD CROCKERY AND

CUTLERY

PROGRAM

PROGRESS

DURATION

CONSUMPTION

MINUTES

(1)

WATER
LITRES

POWER
KWh (1)

1 SOAK

Pans and dishes awaiting

completion of the load

Cold prewash

15 3,5 0,02

2 RAPID

Dishes with light dirt,

washed immediately after

use

Wash at 38°C
Rinse at 50°C

27

6,5 0,70

3

ECO (*)

EN 50242

Dishes with normal dirt,

even with dried-on

residues

Cold prewash
Wash at 50°C
Rinse at 65°C
Dry

**

** **

4 NORMAL

IEC/DIN***

Dishes with normal dirt,

even with dried-on

residues

Cold prewash
Wash at 65°C
Cold rinse
Rinse at 70°C
Dry

105

13,5 1,35

5 SUPER

****

Very dirty pans and

dishes, even with dried-on

residues.

Hot prewash
Wash at 70°C
Cold rinse (2)
Rinse at 70°C
Dry

155

15,5 1,60

IMPORTANT: see “NOTES AND REFERENCES” table on the following pages.

If the dishwasher door is open or not properly closed, the washing cycle
will not start.

User instructions

7

PROGRAMS TABLE

PROGRAMME

NUMBER

& SYMBOL

LOAD CROCKERY AND

CUTLERY

PROGRAM

PROGRESS

DURATION

CONSUMPTION

MINUTES

(1)

WATER
LITRES

POWER
KWh (1)

1 SOAK

Pans and dishes awaiting

completion of the load

Cold prewash

15 3,5 0,02

2 RAPID

Dishes with light dirt,

washed immediately after

use

Wash at 38°C
Rinse at 50°C

27

6,5 0,70

3

ECO (*)

EN 50242

Dishes with normal dirt,

even with dried-on

residues

Cold prewash
Wash at 50°C
Rinse at 65°C
Dry

**

** **

4 NORMAL

IEC/DIN***

Dishes with normal dirt,

even with dried-on

residues

Cold prewash
Wash at 65°C
Cold rinse
Rinse at 70°C
Dry

105

13,5 1,35

5

ULTRA

CLEAN

****

Very dirty pans and

dishes, even with dried-on

residues.

Hot prewash
Wash at 70°C
Cold rinse (2)
Rinse at 70°C
Dry

155

15,5 1,60

The

ULTRA CLEAN

program terminate with an extra anti-bacteria rinse that ensures a further
reduction in the bacteria level. If the temperature falls during this stage of the program (e.g.
because the door is opened or due to a power blackout), the program lights (4) flash to warn
that the anti-bacteria effect is not guaranteed.

IMPORTANT: see “NOTES AND REFERENCES” table on the following pages.

If the dishwasher door is open or not properly closed, the washing cycle
will not start.

User instructions

8

PROGRAMS TABLE

PROGRAMME

NUMBER

& SYMBOL

LOAD CROCKERY AND

CUTLERY

PROGRAM

PROGRESS

DURATION

CONSUMPTION

MINUTES

(1)

WATER
LITRES

POWER
KWh (1)

1 SOAK

Pans and dishes awaiting

completion of the load

Cold prewash

15 3,5 0,02

2 RAPID

Dishes with light dirt,

washed immediately after

use

Wash at 38°C
Rinse at 50°C

27

6,5 0,70

3

ECO (*)

EN 50242

Dishes with normal dirt,

even with dried-on

residues

Cold prewash
Wash at 50°C
Rinse at 65°C
Dry

**

** **

4 HALF LOAD

Half load of dishes with

normal dirt, washed

immediately after use.

Wash at 65°C
Cold rinse
Rinse at 70°C
Dry

90

11 1,20

5

ULTRA

CLEAN

****

Very dirty pans and

dishes, even with dried-on

residues.

Hot prewash
Wash at 70°C
Cold rinse (2)
Rinse at 70°C
Dry

155

15,5 1,60

The

ULTRA CLEAN

program terminate with an extra anti-bacteria rinse that ensures a further
reduction in the bacteria level. If the temperature falls during this stage of the program (e.g.
because the door is opened or due to a power blackout), the program lights (4) flash to warn
that the anti-bacteria effect is not guaranteed.

IMPORTANT: see “NOTES AND REFERENCES” table on the following pages.

If the dishwasher door is open or not properly closed, the washing cycle
will not start.

User instructions

9

NOTES AND

REFERENCES

Only

run the soak program with half loads.

Options cannot be used with the soak program.

*

Standard programme under

EN 50242

.

** See information sheet provided

***

IEC/DIN

reference programme.

****

Reference program for laboratories: Detergent:

20g

in the

dispenser

+

10g

in

the door or tablet. Configuration: see photo in “Using the baskets”.

(1) The cycle duration and power consumption may vary according to the water

and room temperatures, and the type and amount of dishes.

(2) 1 or 2 cold rinses depending on the model.

REFERENCES for the ENERGY LABEL supplied with the dishwasher:

- Annual energy consumption is based on 280 standard wash cycles with cold
water and consumption of low-energy operating modes. Actual consumption
depends on the way in which the appliance is used.

- Water consumption is based on 280 standard wash cycles. Actual
consumption depends on the way in which the appliance is used.

- Information refers to the

EN 50242 STANDARD programme (identified in the

programmes table), which is the most effective in terms of combined energy
and water consumption. The programme is recommended for dishes with a
normal level of dirt.

- Energy consumption in “sleep” mode = 0.02 W.

- Energy consumption in “on” mode = 1.5 W.

- Drying efficiency class on a scale from “G” (minimum efficiency) to “A”
(maximum efficiency).