IRIS – Installation GUIDE
IRIS – Istruzioni di installazione
IRIS Range
1700389
EN
Page 2/9
Technical Document for Installation Procedures
1. Introduction
This document describes installation procedures for IRIS range, namely models:
IR902ISC (double bowl),
IR901ILSC & IR901IRSC (single bowl, left hand drainer & right hand drainer),
IR9015ILSC & IR9015IRSC (1 bowl &1/2, left hand drainer & right hand drainer).
Because of the low room available underneath, some specific solutions have been developed, in order to semplify installation operations.
2. Cabinet Sizes
This range is suitable for following cabinets:
IR902ISC: minimum cabinet size 900 mm
IR901ILSC, IR901IRSC: minimum cabinet size 450 mm
IR9015ILSC, IR9015IRSC: minimum cabinet size 800 mm
3.Cut out sizes
480 X 860 mm
Warning:
Size 860 mm is bigger than usual (usual is 480 x 840)
4.Installation of IRIS single bowl or 1 bowl & 1/2 – (IR901ILSC & IR901IRSC, IR9015ILSC & IR9015IRSC )
Long sides
N° 4 fixing clips code 1410194 per side
Drainer side and bowl side when there isn’t the cabinet wall
EN
1700389