Smeg LB8 User manual [GB]

-EN- LB8/DS -

LB8/DS - INSTRUCTIONS FOR ASSSEMBLY AND USE

Read the safety warnings and instructions for the thermodisinfectors in which the rack is used
withcare, together with the safety instructions of the producer of the glassware and any other item placed on

the rack. Badly positioned items or glass which shatters during washing may cause dangerous injuries. If
necessary, washing results must be checked and subjected to non-visual inspections.

1 LIST OF COMPONENTS SUPPLIED

Qt.y

1

8

8

PART

NUMBER

TC40

U6260

U6310

DESCRIPTION

LM40 central pipe (for
version without DS
only)
stainless steel nozzle
D=6 H=260 (mm)
stainless steel nozzle
D=6 H=310 (mm)

Qt.y

1

1

NOZZLE

(E.g. 390 means

Stainless steel nozzle with

D= 3mm and H= 90mm)

PART

NUMBER

TC40DS

DESCRIPTION

LM40DS central pipe
(for DS version only)

-

Nozzle spanner

19390344900_LB8-DS_EN

1

Ed. 01 - 03/01/2012

-EN- LB8/DS -

2 NOZZLE ASSEMBLY DIAGRAM

Rear

1

2

1 2

2

1

1

2

2

1

Front

1

2

1

2

2

1

POSITION DESCRIPTION

1
2

U6310
U6260

3 ASSEMBLY SEQUENCE

ILLUSTRATION PROCEDURE

Fig.1

19390344900_LB8-DS_EN

Insert the central pipe into place and tighten
the ring-nut to fix all parts.

2

Ed. 01 - 03/01/2012

-EN- LB8/DS -

ILLUSTRATION PROCEDURE

Fig. 2

If your product is equipped with the DS device,
the pack contains pipe B (TC40DS) instead of
the ordinary pipe A(TC40), in which case the
pipe B must be fitted as shown in figure 3, i.e.
with the pipe projecting towards the rear of the
rack, so that once it is inside the disinfector it
will be aligned with the connection (illustration
below).

Fig.3

Fig. 4

Fit the different types of nozzles in the
positions shown in the nozzle assembly
diagram.
Tighten the nozzles with the spanner provided.

When inserting the rack in the disinfector, the
greatest care must be taken to ensure that the
tapered connection on the rack is aligned with
the one on the machine.

19390344900_LB8-DS_EN

Fig. 5

3

Ed. 01 - 03/01/2012

-EN- LB8/DS -

4 USE AND PRECAUTIONS

PROCEDURE PROCEDURE

Take care not to place pieces of glassware

touching each other.

Ensure that no glassware or any other item

for washing projects above the water intake.

Via Leonardo da Vinci, 4 – 42016 Guastalla (RE) Italy

Tel. [phone] - Fax + 0522 821 592

[e-mail] – www.smeg-instruments.com

E-Mail:

Glass must not rest on the nozzle; it must
stand on the base support, allowing the
water to come out of the nozzle freely.
Move the spring underneath the support to
prevent it from descending.

Ensure that no item for washing projects from
the rack after loading.

Smeg S.p.A.

Instruments Division

19390344900_LB8-DS_EN

4

Ed. 01 - 03/01/2012