BEFORE USING THE APPLIANCE
SAFEGUARDING THE ENVIRONMENT
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
HOW TO OPERATE THE REFRIGERATOR
COMPARTMENT
HOW TO OPERATE THE FREEZER
COMPARTMENT
HOW TO DEFROST AND CLEAN THE FREEZER
HOW TO CLEAN THE REFRIGERATOR
COMPARTMENT
CARE AND MAINTENANCE
TROUBLESHOOTING GUIDE
AFTER-SALES SERVICE
INSTALLATION
ELECTRICAL CONNECTION
12
BEFORE USING THE APPLIANCE
Your new appliance is designed exclusively for
•
domestic use
To get the most out of your new appliance,
read the user handbook thoroughly. The
handbook contains a description of the
appliance and useful tips for storing food.
Keep this handbook for future consultation.
After unpacking, make sure that the appliance is
1.
undamaged and that the door closes properly.
Any damage must be reported to your dealer
within 24 hours after delivery of the appliance.
Wait at least two hours before switching the
2.
appliance on in order to ensure the refrigerant
circuit is fully efficient.
Installation of the appliance and electrical
3.
connections must be carried out by a qualified
electrician, in accordance with the manufacturer's
instructions and local safety regulations
Clean the inside of the appliance before using it.
4.
SAFEGUARDING THE ENVIRONMENT
1.Packing
The packaging material is entirely recyclable, and
marked with the recycling symbol. Follow local
regulations for scrapping. Keep the packaging
materials (plastic bags, polystyrene parts, etc.) out
of reach of children, as they are potentially
dangerous.
2.Scrapping
The appliance is manufactured using recyclable
material.
This appliance is marked according to the
European directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product.
The symbol on the product, or on the
documents accompanying the product, indicates
that this appliance may not be treated as household
waste. Instead it shall be handed over to the
applicable collection point for the recycling of
electrical and electronic equipment.
Before scrapping, make the appliance unusable by
cutting off the power cable and removing the doors
and shelves so that children cannot easily climb
inside the appliance.
Disposal must be carried out in accordance with
local environmental regulations for waste disposal.
Deliver the appliance immediately to an authorized
dump; do not leave it unattended even for a few
days, since it is potentially dangerous for children.
For more detailed information about treatment,
recovery and recycling of this product, please
contact your local city office, your household waste
disposal service or the shop where you purchased
the product.
Information:
This appliance does not contain CFCs (replaced
with R134a) or HFCs (replaced with R600a).
Appliances with Isobutane (R600a):
isobutane is a naturally occurring, low
environmental impact gas. Caution is required,
however, because isobutane is flammable.
Therefore, it is essential to ensure that refrigerant
pipelines are not damaged.
Declaration of conformity
This appliance is designed to store food and is
•
manufactured in conformity with EEC directive
No. 89/109/CEE, 90/128/CEE, 02/72/CEE.
This appliance is designed, manufactured, and
•
retailed in compliance with:
- the safety objectives of the Low Voltage Directive
73/23/EEC;
- the protection requirements of the “EMC”
Directive 89/336/EEC, amended by Directive
93/68/EEC;
The electrical safety of the appliance can only be
•
guaranteed if the product is connected to an
approved earth connection.
13
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
Use the refrigerator compartment only for
•
storing fresh food and beverages and use the
freezer compartment only for storing frozen
food, freezing fresh food and making ice cubes.
After installation, make sure that the appliance is
•
not standing on the power supply cable.
Do not store glass containers with liquids in the
•
freezer since they may burst.
Do not eat ice cubes or ice lollies immediately
•
after taking them out of the freezer since they
may cause cold burns.
Before carrying out any maintenance or cleaning,
•
always unplug the appliance or disconnect the
power supply.
Make sure that your appliance is not near a heat
•
source.
Do not store or use gasoline or other flammable
•
vapours and liquids in the vicinity of this or any
other appliance. The fumes can create a fire
hazard or explosion.
To ensure proper ventilation leave a 1 cm space
•
on both sides and above the appliance.
Ensure that the vent outlets on the appliance
•
casing or housing unit are unobstructed in order
to allow correct air circulation.
All appliances equipped with an ice maker or
•
water dispenser must be connected to a mains
water supply that delivers potable water o nly
(with water pressure between 1.7 and 8.1 bar
(25 and 117 PSI)). Ice makers and/ or water
dispensers not directly connected to a mains
water supply must be filled with potable water
only.
Install and level the appliance on a floor strong
•
enough to take its weight and in an area suitable
for its size and use.
Install the appliance in a dry and well-ventilated
•
place The appliance is set for operation at
specific ambient temperature ranges, according
to the climatic class indicated on the data plate:
The appliance may not work properly if it is left
for a long period at a temperature above or
below the indicated range.
Climatic classAmb. T. (°C)Amb. T. (°F)
SNFrom 10 to 32From 50 to 90
NFrom 16 to 32From 61 to 90
STFrom 18 to 38From 64 to 100
TFrom 18 to 43From 64 to 110
Be careful not to damage the floors when you
•
move the appliance (e.g. parquet flooring).
Do not use mechanical devices or any means
•
other than those recommended by the
manufacturer to speed up the defrosting
process.
Do not damage the refrigerant circuit.
•
Do not use electrical appliances inside the
•
freezer compartments, unless such appliances
are specifically recommended by the
manufacturer.
This appliance is not designed for use by young
•
children or the infirm.
To avoid the risk of children being trapped and
•
therefore suffocating, do not allow them to play
or hide inside the appliance.
The power cable may only be replaced by an
•
authorized person.
Do not use extension leads or adapters.
•
It must be possible to disconnect the appliance
•
from the mains by unplugging it or by m eans of a
two-pole switch fitted upline of the socket.
Ensure that the voltage indicated on the
•
appliance data plate corresponds to the
domestic supply voltage
Do not ingest the contents (non-toxic) of the ice
•
packs (if provided).
14
HOW TO OPERATE THE REFRIGERATOR
COMPARTMENT
This appliance is a refrigerator with a start freezer
compartment.
Defrosting of the refrigerator compartment is completely
automatic.
The refrigerator can operate at ambient temperatures between
+10°C and +38°C. Optimal performance is obtained at
temperatures between +16°C and +32°C.
Switching on the refrigerator for the first time
Insert the plug into the mains socket.
The thermostat is used to adjust the temperature of both
compartments: refrigerator and freezer.
How to adjust the temperature of the compartments:
For correct operation and optimum storage of food,
1.
instructions given in the enclosed product sheet for
thermostat adjustment.
To adjust the temperature in the refrigerator compartment,
2.
turn the thermostat control knob:
•lowest/MIN
temperatures;
•highest/MAX
temperatures.
Thermostat set to●: no operation, no light.
Note:
The ambient air temperature, frequency of door opening and the
position of the appliance can affect internal temperatures. These
factors must be taken into account when setting the thermostat.
How to use the refrigerator compartment
Position the food as illustrated in the figure.
A. Cooked food
B. Fish, meat
C. Fruit and vegetables
D. Bottles
E. Eggs
F. Butter, cheese and dairy produc ts
Notes:
The space between the shelves and the rear wall of the
•
refrigerator compartment must be unobstructed to allow
circulation of air.
Do not place food in direct contact with the rear wall of the
•
refrigerator compartment.
Do not place hot food in the refrigerator or freezer.
•
Store liquids in closed containers.
•
Storing vegetables with a high water content can result in
•
condensation in the crisper drawer: this will not affe ct the
correct operation of the appliance.
numbers for the
numbers for the
LEAST COLD
COLDEST
internal
follow
internal
15
HOW TO OPERATE THE FREEZER
COMPARTMENT
The freezer is a star
This compartment can be used to store frozen foods for the
period of time indicated on packaging. The freezer can also
be used to freeze fresh food by positioning it on the rack;
place frozen food in the lower part of the compartment so
that there is no contact with fresh food that has yet to be
frozen.
The quantity of fresh food that can be frozen in 24 hours is
shown on the rating plate.
Important:
Before freezing, wrap and seal fresh food in:
aluminium foil, cling film, air and water-tight plastic bags,
•
polythene containers with lids or freezer containers suitable for
freezing fresh food.
In the event of a power cut, the freezer compartment will
•
maintain a sufficiently low temperature for food storage.
However, it is advisable to avoid opening the compartment door
during such periods.
Important:
The table alongside shows the recommended maximum
storage time for frozen fresh foods.
When purchasing frozen food products:
Ensure that the packaging is not damaged (frozen food in
•
damaged packaging may have deteriorated). If the package is
swollen or has damp patches, it may not have been stored under
optimal conditions and defrosting may have already begun.
When shopping, leave frozen food purchases until last and
•
transport the products in a thermally insulated cool bag.
Place the items in the freezer compartment as soon as you get
•
home.
If food has defrosted even partially, do not re-freeze it.
•
Consume within 24 hours.
Avoid, or reduce temperature variations to the minimum.
•
Respect the best-before date on the package.
Always observe the storage information on the package.
•
Making ice cubes
Fill the ice cube tray 3/4 with water and place it at the bottom of
•
the freezer compartment.
Do not use sharp or pointed instruments to detach the tr ay if it
is stuck to the compartment bottom.
compartment.
MONTHS
FOOD
16
HOW TO DEFROST AND CLEAN THE FREEZER
Defrost the freezer compartment once or twice a year,
or when the ice on the walls reaches a thickness of about
3 mm. If possible, defrost the freezer when it is nearly
empty.
Remove the food from the freezer, wrap in a newspaper
1.
and group together in a cool place or in a portable cooler.
2. Disconnect the appliance from the mains power
3.
4.
5.
6.
Note: Do not use sharp or pointed metal instruments to
scrape off ice; do not heat the freezer compartment
artificially.
.
supply
Leave the door open to allow the frost to melt.
Remove the defrost water from the compartment bottom.
Clean the interior using a sponge dampened in a solution of
warm water and neutral detergent.
Do not use abrasive products.
Rinse the interior and dry thoroughly.
HOW TO CLEAN THE REFRIGERATOR
COMPARTMENT
Periodically clean the inside of the refrigerator
compartment.
Defrosting of the refrigerator compartment is
completely automatic.
Droplets of water on the rear wall of the refrigerator
compartment indicate that the periodic automatic defro st cycle
is in progress.
The defrost water is automatically routed to a drain o utlet and
into a container from which it evaporates.
Clean the defrost water drain outlet regularly using the tool
supplied with the appliance in order to ensure defrost water is
removed correctly.
Before carrying out any cleaning operations, disconnect the
appliance from the power supply.
Use a sponge dampened in lukewarm water and/or neutral
•
detergent.
Rinse the interior and dry with a soft cloth.
•
Do not use abrasive products.
17
CARE AND MAINTENANCE
For built-in appliances
Periodically clean air vent s with a vacuum cleaner or a
•
brush (see
Clean the outside using a soft cloth.
•
figure A
Freestanding appliances
Periodically clean the condenser at the rear of the
•
appliance with a vacuum cleaner or a brush (see
Long vacation
Empty the refrigerator and freezer compartments.
1.
Disconnect the appliance from the mains power supply.
2.
Defrost the freezer compartment, and clea n and dry both
3.
compartments.
Leave the doors open to prevent formation of unpleasant
4.
odours.
).
figure B
).
Fig. A
TROUBLESHOOTING GUIDE
1. The appliance is not working.
Is there a power failure?
•
Is the plug properly inserted in the socket?
•
Is the double-pole switch on?
•
Has the fuse blown?
•
Is the power cord in perfect condition?
•
Is the thermostat set to● (Stop)?
•
2. Temperature inside the compartments is
not low enough.
Is the door shut properly?
•
Is the appliance installed near a heat source?
•
Is the thermostat setting correct?
•
Are the air circulation grilles blocked?
•
3. Temperature inside the refrigerator
compartment is too low.
Is the thermostat setting correct?
•
4. Water collects at the bottom of the
refrigerator compartment.
Is the defrost water drain blocked?
•
5. The inside light is not working.
Perform the checks for problem 1, then:
Disconnect the appliance from the mains power
•
supply.
To inspect the bulb, refer to the instructions and
illustration on the attached table.
Check the bulb and if necessary replace it.
•
Replace using maximum 15W bulb.
6. Excessive frost build-up in the freezer
compartment
Is the door shut properly?
•
Is food obstructing proper door closure?
•
Notes:
• The front edge of the appliance may be hot.
This prevents the formation of condensation
and is not a defect.
• Gurgling and hissing noises due to expansion
in the refrigerant circuit are normal.
Fig. B
18
AFTER-SALES SERVICE
Before contacting After-Sales Service:
See if you can solve the problem yourself with the
1.
help of the “Troubleshooting guide”).
Switch the appliance on again to see if the
2.
problem persists.
If it does, switch off and wait for about an hour
before switching on.
If the problem persists after this co urse of action,
3.
contact After-sales Service.
Specify:
the nature of the problem,
•
the model,
•
the Service number (the number after the word
•
INSTALLATION
Install the appliance away from heat sources.
•
Install the appliance in a dry, well-ventilated place.
•
Do not obstruct the top and bottom vent zones.
•
Clean the inside (see chapter “How to clean the
•
refrigerator compartment”).
Fit the accessories supplied.
•
Electrical Connection
• Electrical connections must be made in
accordance with local regulations.
Voltage and power consumption are indicated on
•
the rating plate (at the side of the crispers).
Freestanding appliances (not built-in)
Fit the spacers (if supplied) on the rear of the
•
condenser positioned at the back of the appliance
(see figure).
To optimize appliance efficiency, leave a 5 cm gap
•
above the appliance and make sure that adjacent
kitchen units are sufficiently distanced to allow air
circulation.
Ensure that the appliance is level, using the front
•
adjustment feet if necessary.
SERVICE on the data plate on the inside of the
appliance),
your full address,
•
your telephone number and area code.
•
Note: The direction of door opening can be
• Regulations require that the appliance is
earthed. The manufacturer declines all
liability for injury to persons or animals and
for damage to property resulting from
failure to observe the above procedures and
reminders.
If the plug and socket are not of the same type,
•
have the socket replaced by a qualified
electrician.
Do not use extension leads or adapters.
•
Disconnecting the appliance
It must be possible to disconnect the appliance by
•
unplugging it or by means of a two-pole switch
fitted upline of the socket.
19
ELECTRICAL CONNECTION
For Great Britain only
Warning - this appliance must be earthed
Fuse replacement
If the mains lead of this appliance is fitted with a BS 1363A
13amp fused plug, to change a fuse in this type of plug use an
A.S.T.A. approved fuse to BS 1362 type and proceed as
follows:
Remove the fuse cover (A) and fuse (B).
1.
Fit replacement 13A fuse into fuse cover.
2.
Refit both into plug.
3.
Important:
The fuse cover must be refitted when changing a fuse and if
the fuse cover is lost the plug must not be used until a
correct replacement is fitted.
Correct replacement are identified by the colour insert or
the colour embossed in words on the base of the plug.
Replacement fuse covers are available from your local
electrical store.
Socket outlet / plug
If the fitted plug is not suitable for your socket outlet, please
contact Whirlpool Service on 0870 600 8989 for further
instruction. Please do not attempt to change plug yourself.
This procedure needs to be carried out by a qualified
Whirlpool technician in compliance with the manufactures
instructions and current standard safety regulations.
For the Republic of Ireland only
The information given in respect of Great Britain will
frequently apply, but a third type of plug and socket is also
used, the
2-pin, side earth type. In this case, the wire which is
coloured GREEN AND YELLOW must be connected to the
EARTH contact, and the two wires to the two pins,
irrespective of colour. The supply to the socket must be
fitted with a 16 amp fuse.
20
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.