CLEANING AND MAINTENANCE .........................................................................20
Defrosting the Refrigerator Compartment:................................................................ 20
Defrosting the Freezer Compartment: ....................................................................... 21
Replacing the Light Bulb ............................................................................................ 21
BEFORE CALLING YOUR AFTER SALES SERVICE ..........................................22
PARTS OF THE APPLIANCE AND THE COMPARTMENTS................................24
-The operating instructions apply to several models. Differences may therefore occur.
EN - 13 -
PART 1.
BEFORE USING THE APPLIANCE
Safety Instructions
• If the model contains R600a-see name plate under refrigerant (the coolant isobutane),
naturals gas that, is very environmentally friendly but also combustible. When
transporting and installing the unit care must be taken to ensure that none of the
refrigeration circuit components become damaged. In the event of damage avoid
naked flames or ignition sources and ventilate the room in which the unit is placed
for a few minutes.
Warning: Keep ventilation openings in appliance enclosure or in structure for building
in, clear of obstruction.
• Do not use mechanical devices or other artificial means to accelerate the defrosting
process.
• Do not use electrical appliances in the refrigerator or freezer compartment of the
appliance.
• If this appliance is to replace an old refrigerator with a lock; break or remove the lock
as a safety measure before storing it, to protect children while playing might lock
themselves inside.
• Old refrigerators and freezers contain insulation gases and refrigerant, which must
be disposed of properly. Entrust the disposal of a scrap unit categorically to
competence of your local waste disposal service and contact your local authority or
your dealer if you have any questions. Please ensure that the pipe of work of your
refrigerating unit does not get damaged prior to being picked-up by the relevant waste
disposal service.
Important note:
Please read this booklet before installing and switching on this appliance. The
manufacturer assumes no responsibility for incorrect installation and usage as described
in this booklet.
Please ask your municipal authority about the disposal of the WEEE for
the reuse, recycle and recovery purposes.
EN - 14 -
Recommendations
Warning: Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer. Do not use electrical
appliances inside the food storage compartments of the appliance, unless they are of
the type recommended by the manufacturer. Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of obstruction. Do not damage the refrigerant
circuit.
• Do not damage the refrigerant circuit.
• Do not allow children to play with the appliance. Children must
never sit in the drawers or hang from the door.
• Do not use adapters or shunts, which could cause overheating
or burning.
• Do not plug old, warped power supply cables.
• Do not twist and bend the cables, and keep them away from hot
surfaces.
• Do not plug the power supply with wet hands.
• Your old appliances contain insulation gases and refrigerant
that must be disposed of properly. Please ensure that the
refrigerant circuit is not damaged before the appliance is taken
away for disposal.
• After installation make sure that the power cable is not trapped
underneath appliance.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.Children should be
supervised to ensure that they don’t play with the appliance.
• If the supply cord is damaged it must be replaced by the
manufacturer or service agent or appointed qualified person.
• Do not defrost the appliance with other electrical devices (i.e. hair dryer) or other
artificial means, and do not use sharp metal objects to remove the ice on the freezer,
as this could cause damage to the refrigerant system.
• Do not operate any electrical appliances inside the refrigerator or freezer.
• Do not place bottles (glass or tin) containing liquids (especially sparkling liquids)
into the freezer as they could cause the bottle to burst during freezing.
• Do not touch the cooling surfaces while the appliance operates, especially with wet
hands, because the skin may stick to cold surfaces.
EN - 15 -
• Do not eat ice, which has just been removed from the freezer.
• The appliance is not intended for use by people (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety. Children should be supervised to ensure that
they don’t play with the appliance.
• If the supply cord is damaged it must be replaced by the manufacturer or service
agent or similary qualified people in order to avoid a hazard.
Switching On the Appliance
• Before switching on, place the appliance on upright position
and wait at least three hours without moving the appliance. This
will give the refrigerant circuit time to settle and operate
efficiently.
• Clean the appliance thoroughly, especially in the interior, before
use (See Cleaning and Maintenance).
• Installation of the appliance and electrical connections must be
carried out by a qualified technician, in accordance with the
Installation Manual and local regulations.
• Installation procedure into the kitchen unit is given in the
Installation Manual. This product is intended to be used in
proper kitchen units only.
• The appliance must be connected with a properly installed fused
socket. Power supply (AC) and voltage at the operating point
must with the details on the name plate of the appliance (name
plate is located on the inside left of the appliance).
• Insert the plug into a socket with an efficient ground connection.
If the socket has no ground contact or the plug does not match,
we suggest you to call an authorized electrician for assistance.
• Manufacturer is not responsible for failure to complete the
ground connection as described in this booklet.
• There can be an odor when you first switch on the appliance. It will disappear after
the appliance starts to cool.
EN - 16 -
Loading...
+ 10 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.