Page 1
Code : C600-58
FA160X FA161MX FA162MX
Read this user guide thoroughly and carefully before using for
your safety and optimal performance of refrigerator.
Page 2
1
Be sure to keep for safety 1~3
Installation Guide 4
Control Panel 5
Temperature Control 6
How to change Interior Light Bulb 7
How to use interior Parts 8~10
How to use the Dispenser 10
How to use Automatic Icemaker 11
Care & Cleaning 12~13
Before You Call for Service... 14
Something strange?
Don’t worry. Here is the answer 15
Installation Preparation 16
If the refrigerator can not pass through a door
during installation, follow these steps 17~18
Refrigerator Leveling &
Door Adjustment(if needed.) 19
How to install Water Line 20~21
Contents
Be sure to keep for safety !
Read these safety instructions thoroughly and carefully before using. Please keep this user guide to
hand for future reference.
WARNING
CAUTION
Indicates the possibility of danger of
death or serious injury
Indicates the possibility of risk of personal
injury or material damage
DO NOT remove or disassemble!
Be sure to unplug from receptacle(outlet/mains)!
NO., DO NOT...
Be sure to keep and follow!
Other Signs
WARNING
Do not plug several appliances into the
same wall outlet (receptacle).
It can be a cause of overheating and/or fire.
Use an exclusive grounding receptacle for
the refrigerator.
Never let the power cord be crushed
by the refrigerator itself or other (heavy)
objects.
Never bend power cord excessively.
If the cord is damaged or peeled, it can be a
cause of fire and electric shock.
Never use a damaged power cord or plug,
or loose main socket .
There is a risk of fire, electric shock or
serious injury.
Never unplug by pulling only the power cord
wire. Always grip the plug firmly.
Never hold the power cord or plug with wet
hands.
There is a risk of electric shock.
Be sure to ground. Check if your wall outlet
is grounded (earthed) .
There is a risk of electric shock hazards.
1. If the supply cord becomes damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
2. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Caution
Page 3
2 3
Do not store medicine, academic research
samples which require strict temperature
control in the refrigerator.
Never insert fingers or hands into the bottom
of refrigerator, especially into the bottom
back.
You can be hurt by sharp metal edges or can
receive an electric shock.
Do not change fuse or light bulb on your
own. Call the service agent to change them.
When you find the power cord damaged or
cut, call the service agent immediately.
When you get rid of your old refrigerator, be
sure to remove the door packings first.
Children can be entrapped and suffocated in
an abandoned refrigerator.
Leave it
just a few days! is very dangerous.
Be sure to unplug when the refrigerator is
not used for a long time.
Never touch foods and containers
especially of metal with wet hands in the
freezer compartment.
You can be hurt by chilblains or cold bum.
Never eat any decayed or deteriorated food at all.
Foods stored too long in the refrigerator can be
decayed or deteriorated .
Never place bottles and containers of glass
in the freezer compartment.
Glass containers and bottles can be broken
so can hurt you.
WARNING
CAUTION
When moving the refrigerator (horizontally
or tilted), more than 2 persons are required
to hold it.
( One to hold top back handles, the other,
bottom holder. )
If other parts gripped, it is very dangerous
and likely to slip.
Be sure to turn up the wheel first before
moving the refrigerator.
The wheels can damage or scratch the floor.
If you move it a long distance, never forget
to fasten the interior parts tightly with tapes.
The parts can collide and break each other.
Do not install the refrigerator on a wet
floor or in a place with much humidity
moisture.
Electric insulation gets weakened,
resulting in a risk of electric shock
hazards.
Let the cord from the plug outlet be
directed Downwards.
If it is directed up, the cord near the plug is
bent and can be damaged, which can
cause an electric shock or fire.
Check if plug is loose from the wall outlet.
Electric insulation gets weakened,
resulting in a risk of electric shock
hazards.
Never let the power cord touch or pass over
heating appliances.
Power cord can be damaged, resulting in a
risk of electric shock hazards.
Do not place containers with water or
liquid on top of refrigerator.
Water can be poured into the refrigerator
and can cause electric shock hazards or
damage.
Never pour or spray water into the
refrigerator (both interior and exterior).
Electric insulation gets weakened, resulting
in a risk of electric shock hazards.
Do not move or remove compartment
shelves/pockets while foods and
containers are on them.
Hard container (of glass, metal etc.) can
fall to hurt you and can break shelf glass
and interior parts.
Do not let children hang on the refrigerator
doors.
Refrigerator can fall and do harm to them.
Never repair or disassemble or amend the
refrigerator on your own
There is a risk of personal injury or damage
to the refrigerator. It is recommanded that
any service be carried out by a qualified
person.
Never store any flammable gas or liquid
in the refrigerator.
Never use flammable gas, benzene, thinner,
gasoline, spray etc. near the refrigerator.
There is a risk of fire, explosion and
personal injury or damage.
If a gas leak is found near the refrigerator
or in the kitchen, ventilate it immediately
without touching power plug or
refrigerator.
WARNING
Page 4
54
Control Panel
Never install the refrigerator on a wet, watery floor or where water can easily gather.
Check the following before power connection.
Connect power plug only to a grounded wall receptacle (an earthed mains).
Do not plug refrigerator power together with other appliances to a same receptacle(socket).
Do not use an adapter plug or an extension cord.
Do not let power cord be crushed down by other (heavy) objects .
If you hear a strange noise or strong chemical odour or find smog etc. from the refrigerator after
power plugin, pull out the plug immediately and call the service agent.
Wait about 5 minutes before you plugin again in order to prevent any
damage to the compressor and electrical devices of refrigerator.
Wait 2~3 hours until the inside gets cold enough after the first power plugin, then store foods inside.
(There can be some peculiar smell of plastic parts at initial operation of refrigerator after plugin.
The smell fades away as the refrigerator works and doors are opened and closed.)
Precautions in installation and power connection
To prevent fire, electric shock or leakage
Precautions in use
To prevent personal injury, fire, electric shock etc. read this user guide carefully before use and keep it at
hand for any reference.
❈Read these safety instructions carefully before use and follow precautions for your safety.
Accessories
Installation Guide
Egg case Filter Box Water supply Kit User guide
Dispenser Models Only
Interior lights of refrigerator turn off when the doors are open for more than 10 minutes.
In case either freezer or refrigerator door is open for more than a minute, door alarm rings for 5 minutes with
1 minute interval.
It shows that the digital control system is working the
refrigerator.
(The icon is always on while the refrigerator is working.)
As long as the refrigerator is working deodorization is
always on.
After 6 month of first power input, “FILTER CHANGE”
icon is ON.
When the time comes to change the filter or reset
push “RESET WATER FILTER” button for 5 seconds
after change, then “FILTER CHANGE” icon is OFF.
Children may push any button on the panel for fun,
resulting in disorder of temperature and function of
refrigerator.
- Press this button to lock out this possibility and to
keep temperature and function setting.
- Push Lock button again for more than a second to
stop it.
For your convenience you can select WATER /
CUBED ICE or CRUSHED ICE.
A rectangle line around the icon lights up to indicate
your selection is ON.
To obtain the water or ice, push the pad smoothly
with your cup and your selection will come out 1~2
seconds later.
- Try to avoid placing the rim of your glass near the
bottom of the pad, otherwise Water or Icecubes
may spill or splash.
- You will hear a snap sound 2 seconds after the
icecubes come out. This is from the shut off ice-out
valve.
- Wait 2~3 seconds after pushing the pad to get all
the available water or ice cubes.
When cleaning the icecubes case assembly or
when you do not use for a long period of time,
remove the icecubes in the ice storage case and
press the button to stop making icecubes.
Dispenser Model
Basic Model
Page 5
6 7
Temperature Control
When this refrigerator is first plugged in, the temperature mode is set to [Middle].
Push the FREEZER SET. button and the setting
temperature changes as the figure shows.
Push the REFRIGERATOR SET. button and the
setting temperature changes as the figure shows.
>>> Sequential Temperature Change <<< >>> Sequential Temperature Change <<<
Foods in the refrigerator can be frozen if the ambient temperature of the refrigerator is below 5°c.
When you want faster freezing, push the SUPER
FREEZER. button. Just push the button once
again when you want to stop the mode.
Faster Freezing...
When you want faster refrigerating, push the
SUPER REFRIGERATOR. Just push the button
once again when you want to stop the mode.
Faster Cooling or
Refrigeration
Freezer Compartment Refrigerator Compartment
Push the FRZ. TEMP button and the setting
temperature changes as the figure shows.
Push the REF. TEMP button and the setting
temperature changes as the figure shows.
>>> Sequential Temperature Change <<< >>> Sequential Temperature Change <<<
Freezer Compartment Refrigerator Compartment
Caution
Dispenser Model
Basic Model
How T o change the lnterior Light Bulb
Change of Freezer Lights
Remove the 2 screws
retaining the light cover.
Hold the botton of the
light cover and pull
forward to remove.
Change the light bulb.
Follow the reverse order
of disassembing after
changing the light
Remove the screws
retaining the light cover.
Hold the bottom of cover and
pull forward to remove.
Change the light bulbs.
Follow the reverse order
of disassembing when
assembling back.
Change of Refrigerator Lights
Refrigerator Top Lights
The lamp shall be replaced only by a service agent or similarly qualified person.
Page 6
8 9
Wash foods before storing.
Divide and separate foods into
smaller pieces.
Place watery foods or foods
with much moisture in front of
shelves (close to door side).
If they are placed close to the
cold air spout, they can be
frozen.
Warm or hot foods should be
cooled down enough before
storing to reduce power
consumption and to enhance
refrigeration performance.
Never forget to cover or wrap
foods to prevent odour of
foods.
Be careful in storing such
tropical fruit as bananas,
pineapples, tomatos, for they
can easily be deteriorate in
lower temperature.
Keep enough space between
the foods as possible. If too
tight or too close, cold air
circulation is hindered, resulting
in poor refrigeration.
Food Storage Tips
Egg case can be placed on a refrigerator shelf as you like.
Do not touch or hold with wet hands foods (foods container) in the
freezer compartment.
There is a risk of chilblains (cold burn)
Do not store medicine, academic research samples etc. in the
refrigerator
.
Do not store vegetables in the chilled room, for they can be frozen.
Freezer Pocket
For storing frozen foods
(Do not store ice cream or long stored foods on the
top freezer pocket.)
Freezer Shelf (tempered glass)
For storing frozen foods such as meat, fish, ice-cream...
Drying Case of Freezer
For storing dried foods for so long
(dried squid, dried anchovy etc.)
Meat case of Freezer
For storing meat, fish, chicken with foil cover or vinyl wrap
Refrigerator Shelf (tempered glass)
For storng common foods
Movable Egg Case
Place the case for your convenience.
(Do not use the case for storing ice cubes
nor place in the freezer compartment.)
Vegetable Case
Fruit Case
For storing fruits
Dairy Pocket
For storing dairy products such
as butter and cheese
Refrigerator Pocket
For storing refrigerating foods, milk, juice, beer bottle etc.
Wine Keeper (option)
Refreshment Pocket
(Refreshment Pocket Models Only)
For frequently used cans, drink water, beverages
Chilled Case (Basic Models Only)
For storing foods temporarily that are ready to cook (meat, fish...)
Magic Cool Zone (Option)
Caution
How to use the interior parts
Basic Model Interior Parts
Dispenser Model Interior Parts
❈Full-option models illustrated. Features are model - dependent.
Page 7
10 11
How to use the Automatic Icemaker
(For Dispenser models)
About 10 icecubes (7~8 times a day) are made at one time. If the ice storage case is full, icemaking stops.
It is normal for the icemaker to make banging sounds when the icecubes are falling into the ice storage case.
To prevent a bad odour or smells, regularly clean the Icecubes Storage Case.
If the amount of ice in the storage case is not sufficient, the ice may not be dispensed. Wait a day or so to make more ice.
If the ice does not dispense easily, ensure the dispenser outlet is not blocked.
In case the icemaker doesn’t work
Pull out the ice storage case and separate the icecubes any icecubes that may have stuck together.
If the amount of water which is supplied to the icemaker needs adjusting. Call for the service agent.
The icecubes in the case may melt to flow down to the freezer room.
If long hours' of power failure is predicted, pull out the case, remove the icecubes in it and replace it back.
If the icecubes get stuck and not dispensed
In case of power failure
Use only the ices out of this refrigerator.
Note
How to use the Dispenser
(For Dispenser models)
Select WATER / CUBED ICE / CRUSHED ICE and press the cup on the PUSH pad for your convenience.
Press the WATER/ICE button to select WATER and ICON lights up to show it is on.
Press the WATER/ICE button to select CUBED ICE and ICON turns on.
Press the WATER/ICE button to select CRUSHED ICE and ICON turns on.
WATER
CUBED ICE
CRUSHED ICE
❈When you get [CUBED ICE] or [CRUSHED ICE], remove the cup from the pad when if it is half full.
( If you don’t, the remaining ICES will make the cup overflow or the dispenser outlet become blocked.)
Avoid using thin fragile cups or crystal glasses when taking (crushed) icecubes.
For your safety, never insert your fingers or other tools into the dispenser outlet.
If you find the (crushed/cubed) ices discolored, stop using the dispenser and call the service agent.
1 hour after you get [CUBED ICE] or [CRUSHED ICE], the selection mode returns to [WATER] automatically.
Caution
Magic cool zone
(Option)
Magic cool zone Contol graphic and Control function
When you plug in first, “OFF” LED is ON.
You can choose “OFF” “VEGETABLE” “FISH” “MEAT” by pushing the
“SELECT” button.
The LEDs and temperatures indicate what you have selected.
Displayed temperature means a target setting value, so it may differ from the actual
room temperature.
Step
OFF
VEGETABLE
FISH
MEAT
Display
-
3 ºC
-1 ºC
-3 ºC
Page 8
12 13
How to Clean
Dairy Pocket
Diary Pocket Cover ; Open the cover a little,
hold both ends and push left to remove.
Diary Pocket ; Hold both ends and pull
upward to remove.
Freezer & Refrigerator Shelves
Open the doors fully,
then pull the shelves forward to remove.
Vegetable Case & Fruit Case
Pull forward and lift up a little to remove.
Interior Parts
Use cloth with water and mild(neutral)
detergent to clean.
Door Packing
Use cloth with mild(neutral) detergent.
Back (Machine Room)
Remove dust on grill with a vacuum cleaner
at least once a year.
Freezer & Refrigerator Pockets
Hold both ends and pull up.
Never use asoline(petrol),
benzene(benzol), thinners etc.,
for they can damage the surfaces.
Caution
Care & Cleaning
Never use any other electrical appliances
together in the inside of the refrigerator for
fear of electric shock or fire.
For your safety, press the (ICE MAKER LOCK) once, when cleaning (removing & replacing) the icecubes
storage assembly.
Be careful not to hurt your hands and fingers when cleaning the assembly.
Be sure to
unplug first !
Icecubes storage Case
Removing ; Pull up the case assembly
forward to remove.
Replacing ; Fit to the side grooves and
insert to the end.
If it is difficult to fully insert the case,
remove it, rotate the swirl coil in the
case or drive mechanism a quarter
turn and insert again.
Do not store the icecubes too long.
Dispenser Water Shelf
Remove the spill grill and clean the water shelf
regularly.
( The spill shelf is not self-draining.)
Caution
❈ Full - option models
illustrated.
Page 9
14 15
Something strange ?
Don
t worry. Here is the answer .
Case
Heat
Door
is
sticky
Strange
Sound
Frost
& Dew
Explanation
Front and side of refrigerator feels
warm or hot.
Doors do not open easily.
It sounds like water is flowing from
the refrigerator.
Something cracking or click
sound.
Humming or buzz sound.
Dew or frost on the wall and/or
food container surface in the
freezer and refrigerator
compartment.
Dew on the interior lights cover
Dew on the cabinet surface
Pipes (refrigerant vessel) are placed beneath the
surface to prevent moisture forming on it.
When you close the door and then open again
immediately,the door is not easy to open. Warm air
rushes into the inside to make the pressure difference.
In this case wait for a minute, then it will open easily.
When the compressor starts to run or stops,
refrigerant which makes the inside cold flowing in
the pipes can make such a sound.
Defrosted water can also make such a sound. (This
refrigerator adopts an automatic defrosting system.)
Inside parts shrink and/or expand due to
temperature change ---When the inside gets cold or
when the door is open ---such sound can be made.
Compressor or fans for cold air circulation can make
such working sound. (If the refrigerator is not level,
the sound can be louder.)
Frost and/or dew can be made in the following cases ;
High temperature and/or high humidity around the
refrigerator
When doors are open too long
Foods with much moisture are stored uncovered or
unwrapped
You can see the same appearance when cold
water is poured in a glass cup and dew is forming
on the surface of it.
The light bulb radiates heat while it is on, so when
doors are open too long, dew can form on the light
cover due to temperature difference.
In case it is highly humid around the refrigerator,
moisture in the air sticks to the surface to form the
dew.
Before You Call for Service...
Please checkup the following troubleshooting tips before you call for service !
Problem Checkup Point Action
Is the refrigerator unpluged ?
Is the temperature set to [Low Mode] ?
Is the refrigerator under direct sunlight or is any
heat appliance placed near it ?
Is the space between refrigerator back and the
wall too close ?
Plug in the refrigerator.
Set the temperature mode to Middle or High.
Move to a place where there is no direct
sunlight, no heat appliences around.
Keep sufficient space (more than
10cm)between refrigerator back and the wall.
It never gets cold inside.
Freezing & refrigerating is
not so good.
Is temperature set to [Strong] ?
Is surround temperature too low ?
Is the food with much moisture stored close to
the cold air spout ?
Set the temperature to [Middle] or [Low].
Foods can be frozen if ambient temperature
is below 5
. Move to a place where the
temperature is over 5
.
Place foods with moisture on the shelves
close to the doors.
Foods in the
refrigerator get frozen.
Is floor beneath the refrigerator uneven ?
Is the space between refrigerator back and the
wall too close ?
Do any objects other stuff touch the refrigerator?
Move the refrigerator to a level and even
floor.
Keep sufficient space.
Remove any object a way which touches the
refrigerator.
Strange sound from
the refrigerator
Is the food stored uncovered or unwrapped ?
Are the shelves and pockets stained with food
stuff ?
Is the food stored too long ?
Be sure to cover and wrap the foods.
Clean them regularly. Once smell gets
soaked to those parts, it is not easy to
remove.
Do not store foods for so long.
A refrigerator is neither a perfect nor a
permanent foods keeper.
Odour or disgusting
smell from the inside
Page 10
16 17
If the refrigerator can not pass through a door
during installation, follow these steps.
Remove front bottom cover first, if it is attached.
Removing Freezer Door
1
Remove the bottom cover first.
Pull out the left collar of the coupling
first, then hold the coupling and pull out
the left water tube.
(Dispenser Models Only)
3
Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect the harness wires.
4
Lift up the front of hinge to remove.
( After the hinge is removed the door
can fall down forward. Be careful !)
5
Be careful not to damage the water line
when removing the door.
2
Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect harness wires.
1
Unscrew top hinge cover with a
screw driver.
Insert a thin screw driver into the
side groove of the cover to remove.
3
Lift up the front of hinge to remove.
(After the hinge is removed the
door can fall down forward. Be
careful !)
4
Lift the door straight up to remove.
2
Unscrew top hinge cover with a
screw driver.
Removing Refrigerator Door
Installation Preparation
Dimensions (including Door Handles)
(Width*Depth*Height) 903mm 734.5mm 1790mm
Sufficient space from refrigerator back to the wall for free
air ventilation
Avoid direct sunlight.
Once the installation place is ready follow the installation instructions.
If surround temperature of refrigerator is low (below 5
), foods can be frozen or the refrigerator can work in
abnormal way.
Check if the refrigerator can pass a doorway or enter a door first.
Find a suitable place to install
!
!
Page 11
18 19
Replacing Freezer Door
2
Insert the bottom hole of freezer door
straight to the bottom hinge pin.
1
Insert the water tube into the hole of the
bottom hinge pin first (Dispenser
Models Only). Insert the bottom of
freezer door into the bottom hinge pin.
3
Let the top of door close to the
cabinet and insert the top hinge pin
to the top hole of freezer door.
( Insert the back of hinge to the
groove of protrusion first, then front
to the top hole of door.)
4
Turn the hinge fastener tightly to the
end.
Connect harness wirings and screw
ground wire.
5
Insert the water tube far into the
coupling.
(Dispenser Models Only)
2
Let the top of door close to the
cabinet and insert the top hinge pin to
the top hole of freezer door.
( Insert the back of hinge to the
groove of protrusion first, then front
to the top hole of door.)
1
Insert the bottom hole of refrigerator
door straight to the bottom hinge pin
3
Turn the hinge fastener tightly to the
end.
Connect harness wirings and screw
ground wire.
Click and screw the top hinge cover.
Replacing Refrigerator Door
Insert a screw driver (flat tip) into a groove of the right wheel
(bottom of refrigerator) and turn it clockwise until the door is balanced.
(clockwise to raise refrigerator door ; counterclockwise to lower)
In case refrigerator door is lower than freezer door...
After installation and/or door leveling, fasten front cover with screws.
(Remove the screws on the front bottom panel first. Click and screw the cover)
Front Cover
Refrigerator Leveling & Door
Adjustment ( If needed. )
Refrigerator must be level in order to maintain optimal performance and desirable front appearance.
(If the floor beneath the refrigerator is uneven, freezer and refrigerator doors look unbalanced.)
Insert a screw driver (flat tip) into a groove of the left wheel
(bottom of freezer) and turn it clockwise until the door is balanced.
(clockwise to raise freezer door ; counterclockwise to lower)
In case freezer door is lower than refrigerator door...
● The front of refrigerator needs to be higher just a little than the back for easy door
closing, but if the wheel is raised too much for door balance, i.e. front of
refrigerator is higher than the back, it can be difficult to open the door.
Caution
!
!
@
!
!
@
Page 12
20 2120
6. Fasten the Water Tube.
5. Connect the Water Tube to the refrigerator.
1) Remove the rear cover at the bottom back of the refrigerator.
2) Insert the fastening ring into the Water tube.
(Be careful to follow the direction of the nut.)
3) Insert the Water Tube into the top of the Water Valve, turn the nut
clockwise to fasten it. (The Water valve is to the right of the motors.)
4) Check for any bent tubes or water leaks; if so, re-ckeck instalation
procedure.
5) Replace the rear cover. (The Water Tube should be placed
between the groove of the refrigerator back and motor cover.)
Water
Tube
Water Tube
Nut
1) Fasten the Water Tube with the [Fastener A] .
2) Check if the tube is bent or sqeezed. If so, set it right to
prevent any water leak.
Fastener A
Water Tube
3. Remove any substances in the filter.
1) Open the main tap water valve and check if water comes out of
the Water Tube.
2) Check if the Water Valve is open in case water does not come out.
3) Leave the valve open until clean water is coming out.
Initial water may contain some substances out of filter
(manufacturing process).
Set the tube upright as the figure shows.
7. After installation of Water Supply System
1) Plug in the refrigerator, press the [WATER] button on the control
panel for 2~3 minutes to remove any air (bubble) in the pipes and
drain out the initial water.
2) Check for the water leaks again through the water supply system
(tubes, connectors and pipes) Rearrange the tubes again and do
not move the refrigerator.
Water Tube
Connector
Tap
4. Attach the Filter Box
1) Screw and fasten the filter holder to the left/right side of the back
of refrigerator.
In case the holder is not fastened well, remove the back paper
of the tape on the filter holder and attach it."
2) Insert the filter box into the holder.
Water Valve
Leave a sufficient distance when cutting the tubes.
2. Get ready to install the Water Filter
1) Measure an approximate distance between the filter and the Water
Tube and cut the tube off filter vertically.
2) Connect the tubes to the filter as the figure shows.
How to install Water Line
(Dispenser Models Only)
WA TER SUPPLY KIT
1. The water pressure should be 2.0~12.5kgf/cm2or more to run
the automatic icemaker.
Checkup your tap water pressure ; if a cup of 180cc is full
within 10 seconds, the pressure is OK.
2. When installing the water tubes, ensure they are not close to any
hot surfaces.
3. The water filter only
filters water ; it does not eliminate any
bacteria or microbes.
4. If the water pressure is not so high to run the icemaker, call the
local plumber to get an additional water pressure pump.
5. The filter life depends on the amount of use. We recommend
you replace the filter at least once every 6months.
When attaching the filter, place it for easy access (removing &
replacing)
6. After installation of refrigerator and water line system, select
[WATER] on your control panel and press it for 2~3 minutes to
supply water into the water tank and dispense water.
7. Use sealing tape to every connection of pipes/tubes to ensure
there is no water leak.
8. The water tube should be connected to the cold water line.
Check the parts below for installing water supply.
Some other necessary parts are available at your
local service agents.
Installation Procedure
(Dispenser Models Only)
1. Join Connector to the tap water line
(3011202000)
(3019974100)
(A:3019503200
B:3019503300)
(3012020700)
(7112401211)
Connector
(3014454520)
Place the rubber washer inside the tap connector and screw onto the water tap.
<Figure A>
<Figure B>
Loading...