Smeg DWI614,ST145,ST997,STA647,STX1-4,STX2-3,STX2LA,STX6L,UKSTX1-1,UKSTX2-1 Instruction Manual
INSTRUCTION MANUAL
DISHWASHER
Contents
25
1. Safety and operating instructions __________________________ 26
2. Installation and hook-up _________________________________ 28
2.1 Water supply connection _____________________________________________________ 28
2.2 Electrical connection ________________________________________________________ 29
3. Description of the controls _______________________________ 30
3.1 Upper panel _______________________________________________________________ 30
3.2 Information display__________________________________________________________ 30
3.3 Washing programs__________________________________________________________ 31
4. Operating instructions___________________________________ 34
4.1 Using the water softening system ______________________________________________ 34
4.2 Using the rinse aid and detergent dispensers _____________________________________ 36
4.3 General warnings and recommendations ________________________________________ 39
4.4 Using the baskets___________________________________________________________ 40
5. Cleaning and maintenance _______________________________ 43
5.1 General warnings and recommendations ________________________________________ 43
6. Troubleshooting _______________________________________ 46
Thank you for choosing this product.
We advise you to carefully read all the instructions contained in this manual, in order to understand
how to operate your dishwasher safely and correctly.
The manual is divided into paragraphs, which provide a step by step description of the dishwasher
functions, with clear instructions accompanied by detailed illustrations.
Recommendations are given for the correct use of the baskets, spray arms, containers, filters,
washing programs, and for operating the controls.
Follow the recommended cleaning procedures to ensure that your dishwasher always remains in
perfect working order.
This manual provides a quick and easy reference for answering all your questions concerning the
use of your new dishwasher.
INSTALLATION INSTRUCTIONS: these are intended for the
qualified technician
who must carry
out the installation, hook-up and testing of the appliance.
USER INSTRUCTIONS: these consist of recommendations for using the appliance, a description of
its controls and of the correct cleaning and maintenance procedures.
Safety instructions
26
1. Safety and operating instructions
THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE: IT MUST ALWAYS BE KEPT INTACT TOGETHER
WITH THE DISHWASHER. BEFORE USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS
CONTAINED IN THIS MANUAL. INSTALLATION MUST BE PERFORMED BY A QUALIFIED TECHNICIAN, IN
COMPLIANCE WITH THE REGULATIONS IN FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC USE, AND
COMPLIES WITH THE
EEC DIRECTIVES 72/23, 89/336 (INCLUDING 92/31)
CURRENTLY IN FORCE, INCLUDING THE
PREVENTION AND ELIMINATION OF RADIO FREQUENCY INTERFERENCE. THE APPLIANCE IS DESIGNED FOR
THE FOLLOWING PURPOSE:
WAS HIN G AND DRYING OF DISHES
; ANY OTHER USE SHALL BE CONSIDERED
IMPROPER.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR USES OTHER THAN THOSE
DESCRIBED ABOVE.
THE NAME PLATE FEATURING THE TECHNICAL DATA, SERIAL NUMBER AND MARKINGS IS VISIBLY POSITIONED
ON THE INNER EDGE OF THE DOO R.
THE NAME PLATE ON THE INNER EDGE OF THE DOOR MUST NEVER BE
REMOVED.
DO NOT LEAVE THE DISCARDED PACKAGING MATERIALS UNSUPERVISED WITHIN THE HOME. SEPARATE THE
VARIOUS MATERIALS WHICH MAKE UP THE PACKAGING AND TAKE THEM TO THE NEAREST SORTED WASTE
COLLECTION CENTRE.
THE APPLIANCE MUST BE PROVIDED WITH AN EARTH CONNECTION IN ACCORDANCE WITH THE ELECTRICAL
SAFETY REGULATIONS IN FORCE.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR DAMAGE TO PERSONS OR PROPERTY RESULTING
FROM THE FAILURE TO EARTH THE APPLIANCE OR FROM A DEFECTIVE EARTH CONNECTION.
IF THE APPLIANCE IS NOT CONNECTED TO THE ELECTRICAL POWER SUPPLY BY MEANS OF A PLUG, IT IS
NECESSARY TO INSTALL AN ISOLATION SWITCH WITH A CONTACT OPENING GAP OF AT LEAST 3 MM.
THE PLUG ON THE POWER CORD AND THE CORRESPONDING SOCKET OUTLET MUST BE OF THE SAME TYPE,
AND MUST CONFORM TO THE REGULATIONS IN FORCE. CHECK THAT THE VOLTAGE AND FREQUENCY OF THE
ELECTRICAL POWER SUPPLY MATCH THE RATINGS ON THE NAME PLATE. AVOID USING ADAPTORS OR SHUNT
CONNE CT IONS.
NEVER UNPLUG THE APPLIANCE BY PULLING THE POWER CORD.
•
AFTER INSTALLATION, THE PLUG MUST REMAIN ACCESSIBLE.
•
IN THE EVENT OF DAMAGE TO THE POWER CORD, HAVE IT REPLACED BY A QUALIFIED TECHNICIAN.
IF THE APPLIANCE IS INSTALLED ON A CARPETED OR COVERED FLOOR, ENSURE THAT THE OPENINGS ON ITS
UNDERSIDE ARE NOT OBSTRUCTED.
ALWAYS SWITCH OFF THE DISHWASHER AFTER EACH USE TO AVOID WASTING ELECTRICITY.
OBSOLETE APPLIANCES MUST BE RENDERED UNUSABLE. CUT OFF THE MAINS POWER CORD AFTER
UNPLUGGING IT FROM THE WALL OUTLET, AND MAKE SAFE ANY COMPONENTS WHICH MIGHT BE DANGEROUS
FOR CHILDREN (LOCKS, DOORS, ETC.). THE APPLIANCE MUST THEN BE TAKEN TO A SORTED WASTE
COLLECTION CENTRE.
IN THE EVENT OF A FAULT, DISCONNECT THE DISHWASHER FROM THE ELECTRICAL POWER SUPPLY AND
SHUT OFF THE WATER TAP. THEN CALL IN A QUALIFIED TECHNICIAN.
Safety instructions
27
DO NOT USE APPLIANCES WHICH HAVE BEEN DAMAGED DURING TRANSIT! IF IN DOUBT, CONSULT YOUR
DEALER.
THE APPLIANCE MUST BE INSTALLED AND CONNECTED IN ACCORDANCE WITH THE INSTRUCTIONS PROVIDED
BY THE MANUFACTURER OR BY A QUALIFIED TECHNICIAN.
THE APP LIAN CE IS IN TE NDED FOR U SE BY ADULTS .
DO NOT ALLOW CHILDREN TO COME NEAR OR PLAY WITH
THE DISHWASHER. KEEP CHILDREN AWAY FROM DETERGENTS AND FROM THE OPEN DISHWASHER DOOR.
THE PACKAGING MATERIALS (PLASTIC BAGS, POLYSTYRENE, METAL BARS, ETC.) MUST NOT BE LEFT WITHIN
THE REACH OF CHILDREN.
KEEP CHILDREN AWAY FROM THE OPEN DISHWASHER. THE APPLIANCE MAY CONTAIN RESIDUES OF
DETERGENT WHICH CAN CAUSE IRREVERSIBLE DAMAGE TO THE EYES, MOUTH, AND THROAT, AS WELL AS
POSSIBLE DEATH BY SUFFOCATION.
DO NOT INTRODUCE SOLVENTS SUCH AS ALCOHOL OR TURPENTINE WHICH MAY CAUSE AN EXPLOSION.
DO NOT LOAD DISHES THAT ARE SOILED WITH ASH, WAX OR PAINTS.
LEANING OR SITTING ON THE DISHWASHER DOOR WHEN OPEN MAY CAUSE THE APPLIANCE TO OVERTURN,
PUTING PEOPLE AT RISK.
DO NOT UNDER ANY CIRCUMSTANCES TOUCH THE HEATING ELEMENT IMMEDIATELY AFTER THE END OF A
WASHING PROGRAM.
OVER TIME, THE DISHWASHER HEATING ELEMENTS MAY CHANGE COLOUR, IN PART OR OVERALL. THIS IS
PERFECTLY NORMAL AND DOES NOT IN ANY WAY AFFECT THE OPERATION OF THE APPLIANCE.
DO NOT DRINK THE WATER RESIDUES WHICH MAY BE PRESENT INSIDE THE DISHES OR DISHWASHER AT THE
END OF THE WASHING PROGRAM AND BEFORE THE DRYING CYCLE.
KNIVES OR OTHER SHARP-ENDED COOKING UTENSILS MUST BE PLACED IN THE CUTLERY BASKET BLADEDOWN, OR LAID HORIZONTAL IN THE TOP BASKET. TAKE CARE NOT TO CUT YOURSELF AND ENSURE THAT
THEY DO NOT PROJECT FROM THE BASKET.
AQUASTOP MODELS
THE AQUASTOP DEVICE PREVENTS FLOODING IN THE EVENT OF A WATER LEAK. WHEN THE AQUASTOP
DEVICE IS TRIPPED, CALL IN A QUALIFIED TECHNICIAN TO IDENTIFY AND REPAIR THE FAULT.
IN MODELS EQUIPPED WITH THE AQUSTOP DEVICE, THERE IS A SOLENOID VALVE INSIDE THE WATER INTAKE
HOSE.
DO NOT CUT THE HOSE AND DO NOT ALLOW THE SOLENOID VALVE TO DROP INTO WATER.
IN THE
EVENT OF DAMAGE TO THE WATER INTAKE HOSE, DISCONNECT THE APPLIANCE FROM THE ELECTRICAL
POWER SUPPLY AND FROM THE WATER SUPPLY.
IMMEDIATELY AFTER INSTALLING THE DISHWASHER, PERFORM A QUICK TEST OF THE APPLIANCE FOLLOWING
THE INSTRUCTIONS BELOW. IF THE DISHWASHER FAILS TO OPERATE CORRECTLY, DISCONNECT IT FROM THE
ELECTRICAL POWER SUPPLY AND CALL THE NEAREST TECHNICAL SERVICE CENTRE.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE.
THE DISHWASHER MEETS ALL THE REQUIREMENTS SET OUT BY THE REGULATIONS IN FORCE CONCERNING
SAFETY AND ELECTRICAL EQUIPMENT. ANY TECHNICAL CHECKS SHOULD BE CONDUCTED EXCLUSIVELY BY A
TRAINED AND AUTHORISED TECHNICIAN:
REPAIRS CARRIED OUT BY UNAUTHORISED PERSONS WILL
INVALIDATE THE WARRANTY, AS WELL AS POSING A POTENTIAL HAZARD TO THE USER.
The manufacturer declines all responsibility
for damage to persons or property resulting from failure to
observe the above precautions, from tampering with even a single component of the appliance, or from the use
of non original spare parts.
Installation instructions
28
2. Installation and hook-up
Remove the polystyrene basket retainers.
Position the appliance in the desired place of installation. The back or sides of the dishwasher may
be placed up against walls or other furniture units.
If the dishwasher is installed near a heat source, fit the special insulating panel to prevent
overheating and malfunction of the appliance.
To ensure stability, install integrated or built-under dishwashers only under continuous worktops,
and screw them to the adjacent units.
To facilitate the installation procedure, the intake and drain hoses can be positioned in any
direction; make sure that the hoses are not kinked, crushed or pulled too tightly. A hole at least
8 cm in diameter is required to allow the power supply cable and pipes to pass.
Level the appliance on the floor using its adjustable feet. This operation is essential for ensuring
correct operation of the dishwasher.
Some models are equipped with only one adjustable foot at the rear, which can be adjusted by
turning the screw on the lower front part of the appliance.
2.1 Water supply connection
Preventing the risk of clogging or damage:
if the water pipe is new or has not been used for a
long time, before connecting to the water supply check that the water is clear and free of impurities,
to prevent damage to the appliance.
The dishwasher must always be connected to the water system with new hoses; old or used
ho se s must ne ver be reused.
CONNECTING TO THE WATER SUPPL Y
Connect the intake hose to a cold water supply with ¾” gas thread, inserting the filter A supplied
with the dishwasher.
Take care to screw the hose firmly into place with your hands and then complete by
tightening about ¼ of a turn with pliers. In dishwashers equipped with the ACQUASTOP
device, the filters is already fitted inside the threaded ring.
The dishwasher can also be connected to a hot water supply
not exceeding 60°C
. Supplying the
appliance with hot water cuts down the washing time by approximately 20 minutes, but slightly
reduces its effectiveness. Make the connection to the domestic hot water supply using the same
procedure described for connecting to the cold water supply.
Installation instructions
29
DRAIN CONNECTION
Insert the dishwasher’s drain hose into a drain pipe
having a diameter of at least
4 cm
, or alternatively,
place it inside the kitchen sink using the plastic support
provided, taking care not to crush or excessively bend
the hose. It is important to prevent the hose from
coming loose and falling. For this purpose, the plastic
support is equipped with a hole for tying it to the wall or
water tap.
The free end should be positioned at a height of
between
30 and 100 cm,
and should never be
submerged in water.
If a hor i zo nt al d rain exte nsio n hose is used (for a
maximum of 3 m) the drain hose can be placed at a
maximum height of
85 cm
from the ground.
2.2 Electrical connection
Plug the power cord into a suitable electrical outlet, according to the instructions given in chapter
"1. Safety and operating instructions".
User instructions
30
3. Description of the controls
3.1 Upper panel
All the dishwasher controls are grouped on the upper panel.
1
ON/OFF
BUTTON
2
PROGRAM SELECTION
BUTTON
3
DELAYED START
BUTTON
4
ECONOMY PROGRAM SELECTION
BUTTON
NO-DRYING CYCLE
BUTTON (on some models only)
5
ECO DRYING CYCLE
BUTTON (on some models only)
6
½ LOAD WASH SELECTION
BUTTON (on some models only)
7
INFORMATION DISPLAY
3.2 Information display
The dishwasher is equipped with a practical
DISPLAY
which provides information on the programmed
dishwasher functions.
Models with
“NO-DRYING CYCLE” function
Models with
“ECO DRYING CYCLE” function
CURRENT PROGRAM INFORMATION
(remaining time indication and warnings for the most common problems)
DELAYED START INDICATOR LIGHT
RINSE AID WARNING LIGHT
REGENERATING SALT WARNING LIGHT
ECONOMY PROGRAM SELECTION LIGHT
NO-DRYING CYCLE LIGHT (on some models only)
ECO DRYING CYCLE LIGHT (on some models only)
HALF-LOAD INDICATOR LIGHT (on some models only)
SWITCHI NG O FF
The end of the washing program is signalled by a short intermitte nt beep and the
appearance of “P0” on the DISPLAY.
ANNULLING THE PROGRAM IN PROGRESS
To annul the program being carried out, aft er opening the door select program "P0".
When the door is closed the dishwasher will skip to t he end of the program.
MODIFYING THE PROGRAM
To modify the current program, after opening the door select the new program.
When the door is closed the dishwasher will start the new program automatically.
DELAYING THE PROGRAM
The start of the washing program can be delayed from a minim um of 1 hour to a
maximum of 9 hours; this allows you to operate the dishwasher at the time of day of
your choice.
When the DELAYE D START button (3) is pressed, the DISPLAY (7) will show first the
duration of the program set and then the number of hours (9,8, …1) of delay with which
it is to be started.
The symbol will rema in until the start of the washing cycle, while t he number of hours
will disappe ar automatically if the keypad is not used for 5 seconds or if any other button
except the DELAYED ST ART button (3) is pressed.
When the door is closed the dishwasher will perform a pre-wash, after which the
“program delay” set previously will start. To check t he time left before the program
starts, simply press the corresponding button once.
If it is necessary to open dishwasher door during the washing cycle, there
will be a 1-minute delay before the program can be resumed.
After correctly closing the door, the washing program will start again from
where it was interrupted. This operation may negatively affective the
progress of the washing cycle.
TABLE FOR CERT IFICATION BO DIES
Reference standard EN 50242
Reference program
(*) BIO program (5)
Load 14 place-settings
Type of detergent B
Amount of detergent 30 g
Rinse aid setting Depending on the model 3/4 or 4/6
EN 50242 STANDARD LOADS
LOWER BA SKET UPPER BA SKET
The cutlery basket disposes of an exclusive system of indipende nt sliding flap
inserts; some combinations permit to make the best of the available space.
Vertical
inserts
Horizontal
insert
open
Horizontal
insert closed
Movement required
to extract the inserts
TABLE OF PROGRAMS
SETTING THE WASHING PROGRAM AND SWITCH ING ON
To select the mos t suitab le progra m for the dishes t o be washed r efer to the table be low, which i ndic ates th e most a ppro priat e program accordi ng to di sh
type and d egre e of soi lin g.
After c hoosing the most sui table washi ng pro gra m using the tab le pro vided:
•
press th e ON/OFF key (1) and wait for the INFORMATION DISPLAY (7) to c ome o n;
•
press th e PROGR AM SELECTION button (2 ) se ver al ti mes, un til the INFORMATION DISPLAY (7) sho ws the number corresp ondi ng to the progr am
of choic e; close the door , the machine wi ll automa tically begin the washing pr ogram after the soun ding of the acou stic device.
"P0" on th e DISPLAY means tha t no washin g progr am has b een se lec ted. Thi s mess age r emain s unti l the PROGRAM SELECTION button (2) is pr essed;
at this point t he nu mber of th e las t progr am use d will appear . Eac h time t he but ton is pr essed agai n, the progr a m numbers wil l move on from that point
forwar d.
All pro gramming op erations are acco mpani ed by a s hort confi rmatory beep; if y ou do not h ear anythi ng when y ou pr ess a button, the func tion c oncer ned is
not avai lab le in th e progr am sel ecte d.
AMOUNT OF
DETERGENT
PROGRAM SEQUENC E DURATION CONSUMPTION
CYCLE N. EC O
BUTTON
EC O
DRYING
(OPTIONAL)
TYPE AND DEGREE
OF DI RT ON DI SH ES
GRAMS PREWASH WAS H COLD RINSE HOT RINSE DRYING M INUTES
(2)
WATER
LITRES (1)
POWER
Kwh (2 )
SOAK
1
_ _
PANS AND DISHES PENDING
COMPLETI ON OF THE LOAD
_
COLD
_ _ _ _
18' 4
_
DELICATE
2
_
DISHES WITH LIGHT DIRT
25
_
45°C 1 1 YES 68' 10 1,05
GLASSWARE
2
SLIGHTL Y SOILED
DELICATE ITEMS
25
_
45°C 1 1 YES 65' 10 0,98
QUICK
3
_ _
DISHES WITH LIGHT DIRT
25
_
38°C 1 1
_
38' 10 0,4
NORMAL
4
_
NORMALLY SOILED PANS AND
DISHES
30
COLD
65°C 1 1 YES 95' 14 1,35
DAILY
4
NORMALLY SOILED DISHES
30
_
65°C 1 1 YES 90' 11 1,32
BIO
(*) EN 50242
5
_
NORMALLY SOILED PANS AND
DISHES, INCLUDING DRIED-ON
RESIDUE
30
COLD
55°C 1 1 YES 160'
(3)
14 1,05
(3)
ECO BIO
5
SLIGHTLY SOILED DISHES WITH
DRIED-ON RESIDUE
30
_
55°C 1 1 YES 100' 11 1,25
INTENS IVE
6
_
VERY DIRTY PANS AND DISHES,
EVEN WITH DRIED-ON DIRT
30
COLD
66°C 2 1 YES 110' 17 1,45
INTENS IVE
(WITHOUT
PRE-WASH)
6
NORMALLY SOILED PANS AND
DISHES WITH DRIED-ON STARCH
DEPOSITS
30
_
68°C 2 1 YES 100' 14 1,42
SUPER
7
_
HEAVILY SOILED PANS AND DISHES
WITH DRIED-ON STARCH DEPOSITS
30
HOT
70°C 2 1 YES 115' 17 1,6
RINSE
(**)
8
_ _
DISHES THAT NEED
“FRESHENING UP”
_ _ _
1 1 YES 40' 7 0,8
In progr ams c ontaining t he symbol, the ECO drying cycle option is a vailab le. This ac tivate s the venti latio n sys tem whi ch all ows th e dishe s to be
dried a t lower t emper atur es (en ergy saving). W ith this option acti ve, the progr am times are longer (about 50’ for the BIO no . 5 program and about 20’ for
all the other cycles).
Only run the soak program with half loads.
The HALF LOAD option (6) is available for all
programs except the soak program.
ECO DRY (5) and HALF-LOAD (6) functions
are only present on some models.
(*) Reference program as EN 50242 standard
(program recommended when using “new
generation” detergents containing enzymes).
(**) Before starting program 8 check that the
door of the detergent dispenser is open.
(-) Not present.
(1) Average power consumption with the
softener set on level 2.
(2) The cycle duration and power consumption
may vary according to the water and room
temperatures, and the type and amount of
dishes.
(3) With ECO DRY function selected.
If the dishwasher door is left open or
is not properly closed, the
INFORMATION DISPLAY (7) will
signal that the washing program
cannot be started.
For any other information about use
and maintenance of the dishwasher,
read the enclosed manual carefully.
19 592 0014 00 AAA
Loading...