Smeg DWAU147 Instruction Manual

Download

INSTRUCTION MANUAL

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS

Contents

1. Safety and operating instructions ___________________________2

2. Installation and hook-up___________________________________5

3. Description of the controls_________________________________9

4. Operating instructions ___________________________________20

5. Cleaning and maintenance _______________________________ 32

6. Troubleshooting________________________________________36

Thank you for choosing one of our products. You are advised to read this manual carefully; it contains all the information you need about the right conditions for the proper, safe use of your dishwasher. The individual sections are laid out to provide you with a step-by-step guide to all your appliance's functions; the t exts are easy to understand and are complete with detailed illustrations. Recommendations are given for the correct use of the baskets, spray arms, containers, filters, washing programs, and for operating the controls. Following the cleaning instructions provided here will keep your dishwasher's performance at peak levels in the long term. This user-friendly manual will provide answers to all your questions about use of the dishwasher.

INSTALLATION INSTRUCTIONS: these are intended for the qualified technician who must carry out the installation, hook-up and testing of the appliance.

USER INSTRUCTIONS: these consist of recommendations for using the appliance, a description of its controls and of the correct cleaning and maintenance procedures.

Safety instructions

ALWAYS SWITCH OFF THE DISHWASHER AFTER EACH USE TO AVOID

1. Safety and operating instructions

THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE: IT MUST ALWAYS BE KEPT INTACT TOGETHER WITH THE DISHWASHER. BEFORE USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS CONTAINED IN THIS MANUAL. INSTALLATION MUST BE PERFORMED BY A QUALIFIED TECHNICIAN, IN COMPLIANCE WITH THE REGULATIONS IN FORCE. THIS APPLIANCE IS INTENDED TO BE USED IN HOUSEHOLD AND SIMILAR APPLICATIONS SUCH AS:

-STAFF KITCHEN AREAS IN SHOPS, OFFICES AND OTHER WORKING ENVIRONMENTS;

-FARM HOUSES;

-BY CLIENTS IN HOTELS, MOTELS AND OTHER RESIDENTIAL TYPE ENVIRONMENTS;

-BED AND BREAKFAST TYPE ENVIRONMENTS

IT COMPLIES WITH THE EEC DIRECTIVES 73/23, 89/336 (INCLUDING 92/31 AND 93/68) CURRENTLY IN FORCE, INCLUDING THE PREVENTION AND ELIMINATION OF RADIO FREQUENCY INTERFERENCE. THE APPLIANCE IS DESIGNED FOR THE FOLLOWING PURPOSE: WASHING AND DRYING OF DISHES; ANY OTHER USE SHALL BE CONSIDERED IMPROPER. THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR USES OTHER THAN THOSE DESCRIBED ABOVE.

THE NAME PLATE FEATURING THE TECHNICAL DATA, SERIAL NUMBER AND MARKINGS IS VISIBLY POSITIONED ON THE INNER EDGE OF THE DOOR. THE NAME PLATE ON THE INNER EDGE OF THE DOOR MUST NEVER BE REMOVED.

DO NOT LEAVE THE DISCARDED PACKAGING MATERIALS UNSUPERVISED WITHIN THE HOME. SEPARATE THE VARIOUS MATERIALS WHICH MAKE UP THE PACKAGING AND TAKE THEM TO THE NEAREST SORTED WASTE COLLECTION CENTRE.

THE APPLIANCE MUST BE PROVIDED WITH AN EARTH CONNECTION IN ACCORDANCE WITH THE ELECTRICAL SAFETY REGULATIONS IN FORCE.

THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR DAMAGE TO PERSONS OR PROPERTY RESULTING FROM THE FAILURE TO EARTH THE APPLIANCE OR FROM A DEFECTIVE EARTH CONNECTION.

IF THE APPLIANCE IS INSTALLED ON A CARPETED OR COVERED FLOOR, ENSURE THAT THE OPENINGS ON ITS UNDERSIDE ARE NOT OBSTRUCTED.

WASTING ELECTRICITY. WARNING: DISHWASHER DETERGENTS ARE ASTRONGLY ALKALINE.

THEY CAN BE EXTREMELY DANGEROUS IF SWALLOWED. AVOID CONTACT WITH SKIN AND EYES AND KEEP CHILDREN AWAY FROM THE DISHWASHER WHEN THE DOOR IS OPEN.

Safety instructions

IN THE EVENT OF A FAULT, DISCONNECT THE DISHWASHER FROM THE

CHECK THAT THE DETERGENT RECEPTACLE IS EMPTY AFTER COMPLETION OF THE WASH CYCLE.

OBSOLETE APPLIANCES MUST BE RENDERED UNUSABLE. CUT OFF THE MAINS POWER CORD AFTER UNPLUGGING IT FROM THE WALL OUTLET, AND MAKE SAFE ANY COMPONENTS WHICH MIGHT BE DANGEROUS FOR CHILDREN (LOCKS, DOORS, ETC.).

THIS APPLIANCE IS MARKED ACCORDING TO THE EUROPEAN DIRECTIVE 2002/96/EC ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE). BY ENSURING THIS PRODUCT IS DISPOSED OF CORRECTLY, YOU WILL HELP PREVENT POTENTIAL NEGATIVE CONSEQUENCES FOR THE ENVIRONMENT AND HUMAN HEALTH, WHICH COULD OTHERWISE BE CAUSED BY INAPPROPRIATE WASTE HANDLING OF THIS PRODUCT.

THE SYMBOL ON THE PRODUCT, OR ON THE DOCUMENTS ACCOMPANYING THE PRODUCT, INDICATES THAT THIS APPLIANCE MAY NOT BE TREATED AS HOUSEHOLD WASTE. INSTEAD IT SHALL BE HANDED OVER TO THE APPLICABLE COLLECTION POINT FOR THE RECYCLING OF ELECTRICAL AND ELECTRONIC EQUIPMENT. DISPOSAL MUST BE CARRIED OUT IN ACCORDANCE WITH LOCAL ENVIRONMENTAL REGULATIONS FOR WASTE DISPOSAL. FOR MORE DETAILED INFORMATION ABOUT TREATMENT, RECOVERY AND RECYCLING OF THIS PRODUCT, PLEASE CONTACT YOUR LOCAL CITY OFFICE, YOUR HOUSEHOLD WASTE DISPOSAL SERVICE OR THE SHOP WHERE YOU PURCHASED THE PRODUCT.

ELECTRICAL POWER SUPPLY AND SHUT OFF THE WATER TAP. DO NOT USE APPLIANCES WHICH HAVE BEEN DAMAGED DURING

TRANSIT! IF IN DOUBT, CONSULT YOUR DEALER. THE APPLIANCE MUST BE INSTALLED AND CONNECTED IN ACCORDANCE WITH THE INSTRUCTIONS PROVIDED BY THE MANUFACTURER OR BY A QUALIFIED TECHNICIAN.

THIS DISHWASHER MUST BE USED BY ADULTS. USE BY PERSONS WITH REDUCED MENTAL AND/OR PHYSICAL CAPABILITIES IS ONLY PERMITTED UNDER THE SUPERVISION OF A PERSON RESPONSIBLE FOR THEIR SAFETY. KEEP CHILDREN AWAY FROM DETERGENTS AND PACKAGING MATERIALS (PLASTIC BAGS, POLYSTYRENE, ETC.), AND NEVER ALLOW THEM TO APPROACH OR PLAY WITH THE DISHWASHER, SINCE IT MIGHT CONTAIN DETERGENT RESIDUES CAPABLE OF CAUSING PERMANENT DAMAGE TO THE EYES, MOUTH AND THROAT, AND EVEN LEADING TO SUFFOCATION. THE APPLIANCE IS NOT INTENDED FOR USE BY YOUNG CHILDREN OR INFIRM PERSONS WITHOUT SUPERVISION.

Safety instructions

DO NOT INTRODUCE SOLVENTS SUCH AS ALCOHOL OR TURPENTINE WHICH MAY CAUSE AN EXPLOSION.

DO NOT LOAD DISHES THAT ARE SOILED WITH ASH, WAX OR PAINTS.

The manufacturer declines all responsibility for damage to persons or property resulting from failure to observe the above precautions, from tamp ering with even a single component of the appliance, or from the use of non original spare parts.

LEANING OR SITTING ON THE DISHWASHER DOOR WHEN OPEN MAY CAUSE THE APPLIANCE TO OVERTURN, PUTING PEOPLE AT RISK. NEVER LEAVE THE DISHWASHER DOOR OPEN; PEOPLE MIGHT TRIP OVER IT.

DO NOT DRINK THE WATER RESIDUES WHICH MAY BE PRESENT INSIDE THE DISHES OR DISHWASHER AT THE END OF THE WASHING PROGRAM AND BEFORE THE DRYING CYCLE.

KNIVES OR OTHER SHARP-ENDED COOKING UTENSILS MUST BE PLACED IN THE CUTLERY BASKET BLADE-DOWN, OR LAID HORIZONTAL IN THE TOP BASKET. TAKE CARE NOT TO CUT YOURSELF AND ENSURE THAT THEY DO NOT PROJECT FROM THE BASKET.

AQUASTOP MODELS

THE AQUASTOP DEVICE PREVENTS FLOODING IN THE EVENT OF A WATER LEAK. WHEN THE AQUASTOP DEVICE IS TRIPPED, CALL IN A QUALIFIED TECHNICIAN TO IDENTIFY AND REPAIR THE FAULT. IN MODELS EQUIPPED WITH THE AQUSTOP DEVICE, THERE IS A SOLENOID VALVE INSIDE THE WATER INTAKE HOSE. DO NOT CUT THE

HOSE AND DO NOT ALLOW THE SOLENOID VALVE TO DROP INTO WATER. IN THE EVENT OF DAMAGE TO THE WATER INTAKE HOSE,

DISCONNECT THE APPLIANCE FROM THE ELECTRICAL POWER SUPPLY AND FROM THE WATER SUPPLY.

IMMEDIATELY AFTER INSTALLING THE DISHWASHER, PERFORM A QUICK TEST OF THE APPLIANCE FOLLOWING THE INSTRUCTIONS BELOW. IF THE DISHWASHER FAILS TO OPERATE CORRECTLY, DISCONNECT IT FROM THE ELECTRICAL POWER SUPPLY AND CALL THE NEAREST TECHNICAL SERVICE CENTRE. DO NOT ATTEMPT TO REPAIR THE APPLIANCE.

THE DISHWASHER MEETS ALL THE REQUIREMENTS SET OUT BY THE REGULATIONS IN FORCE CONCERNING SAFETY AND ELECTRICAL EQUIPMENT. ANY TECHNICAL CHECKS SHOULD BE CONDUCTED EXCLUSIVELY BY A TRAINED AND AUTHORISED TECHNICIAN: REPAIRS

CARRIED OUT BY UNAUTHORISED PERSONS WILL INVALIDATE THE WARRANTY, AS WELL AS POSING A POTENTIAL HAZARD TO THE USER.

Installation instructions

2. Installation and hook-up

Remove the polystyrene basket retainers. Position the appliance in the desired place of installation. The back or sides of the dishwasher may be placed up against walls or other furniture units. If the dishwasher is installed near a heat source, fit the special insulating panel to prevent overheating and malfunction of the appliance. To ensure stability, install integrated or built-under dishwashers only under continuous worktops, and screw them to the adjacent units. To facilitate the installation procedure, the intake and drain hoses can be positioned in any directio n; make sure t hat the h oses are not kinked, crushed or pulled too tightly. Make sure to tighten the locking ring-nut once the pipes have been placed in the direction requi red. A hole at least 8 cm in diameter is required to allow the power supply cable and pipes to pass.

Level the appliance on the floor using its adjustable feet. T his operation is essential for ensuring correct operation of the dishwasher.

Building-in a dishwasher underneath a ceramic hob is absolutely forbidden.

A dishwasher can be built-in underneath a conventional hob provided there is no break in the kitchen worktop, and the dishwasher and hob are installed and secured correctly, so that no hazards are generated.

When installing the dishwasher in a compartment next to one or more other appliances, it is essential to comply with all the recommendations provided by the appliance’s manufacturer (minimum distances, installation procedures, etc.).

For free-standing models only:

- Installing a hob on top of a free-standing dishwasher is absolutely forbidden.

- If the appliance is not built-in and is therefore accessible on on side, the door hinge area must be covered for safety reasons (inj ury haz ard). The covering fixtures are available as an accessory from specialist dealers or the After-Sales Service.

- To build in the dishwasher, the special kit must be purchased from authorised dealers or the After-Sales Service.

Some models are equipped with only one adjustable foot at the rear, which can be adjusted by turning the screw on the lower front part of the appliance.

Installation instructions

2.1 Water supply connection

Preventing the risk of clogging or damage: if the water pipe is new or

has not been used for a long time, before connecting to the water supply check that the water is clear and free of impurities, to prevent damage to the appliance.

The dishwasher must always be connected to the water system with new hoses; old or used hoses must never be reused.

CONNECTING TO THE WATER SUPPLY

Connect the intake hose to a cold water supply with ¾” gas thread, inserting the filter A supplied with the dishwasher. Take care to screw the hose firmly into

place with your hands and then complete by tightening about ¼ of a turn with pliers.

In dishwashers equipped with the ACQUASTOP device, the filters is already fitted inside the threaded ring.

The dishwasher can also be connected to a hot water supply not exceeding 60°C. Supplying the appliance with hot water cuts down the

washing time by approximately 20 minutes, but slightly reduces its effectiveness. Make the connection to the domestic hot water supply using the same procedure described for connecting to th e cold w ater supply .

DRAIN CONNECTION

Insert the dishwasher’s drain hose into a drain pipe having a diameter of at least 4 cm, or alternatively, place it inside the kitchen sink using the plastic support provided, taking care not to crush or excessively bend the hose. It is important to prevent the hose from coming loose and falling. For this purpose, the plastic support is equipped with a hole for tying it to the wall or water tap.

The free end should be positioned at a height of bet ween 30 and 100 cm, and should never be submerged in water. If a horizontal drain extension hose is used (for a maximum of 3 m) the drain hose can be placed at a maximum height of 85 cm from the ground.

Installation instructions

2.2 Electrical connection and precautions

CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS MATCH THE RATINGS ON THE NAME PLATE OF THE APPLIANCE POSITIONED ON THE INNER EDGE OF THE DOOR.

THE PLUG ON THE SUPPLY CORD AND THE CORRESPONDING SOCKET OUTLET MUST BE OF THE SAME TYPE AND MEET THE REGULATIONS IN FORCE.

THE PLUG MUST BE ACCESSIBLE AFTER INSTALLATION.

NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD.

IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT REPLACED

BY THE MANUFACTURER OR AN AUTHORIZED TECHNICAL SERVICE CENTRE.

DO NOT USE ADAPTORS OR SHUNT CONNECTIONS IN ORDER TO AVOID THE POSSIBILITY OF OVERHEATING OR BURNING.

IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD:

IT IS NECESSARY TO INSTALL IN THE FIXED WIRING AN ALL-POLE DISCONNECTION DEVICE HAVING A GAP BETWEEN CONTACTS OF AT LEAST 3.5MM. AFTER INSTALLATION THE DISCONNECTION DEVICE HAS TO BE EASY TO REACH.

THE CONNECTION TO THE MAINS MUST BE CARRIED OUT BY A QUALIFIED TECHNICIAN IN ACCORDANCE TO THE SCHEME SHOWN BELOW AND THE REGULATIONS IN FORCE.

L = brown N = blue

= yellow-green

In the event of damage to the supply cord, have it replaced by the manufacturer or an Authorized Technical Service Centre in order to avoid any risk.

Installation instructions

FOR GREAT BRITAIN ONLY:

THIS APPLIANCE MUST BE EARTHED.

Fuse replacement

If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T.A. approved fuse to BS 1362 type and proceed as follows:

1. Remove the fuse cover A and fuse B.

2. Fit replacement 13A fuse into fuse

cover.

3. Refit both into plug.

The fuse cover must be refitted when changing a fuse and if the fuse cover is lost the plug must not be used until a correct replacement is fitted.

Correct replacement are identified by the colour insert o r the colo ur embossed in words on the base of the plug.

Replacement fuse covers are available from your local electrical store.

User instructions

3. Description of the controls

3.1 Front panel

All the dishwasher controls are grouped on the front panel.

1 ON/OFF BUTTON 2 SELECTION PROGRAM BUTTONS (P1…P5) 3 OPTION SELECTION BUTTON 4 CONFIRM OPTIONS BUTTON 5 DELAY PROGRAM BUTTON 6 START/STOP BUTTON 7 POWER ON LIGHT 8 PROGRAMS INDICATOR LIGHTS 9 INFORMATION DISPLAY

10 RECESSED DOOR HANDLE

N.B.: symbols and styling are guideline and may vary depending o n

the model or version of the dishwasher purchased.

User instructions

3.2 Information display

The dishwasher is equipped with a practical DISPLAY which provides information on the programmed dishwasher functions.

A 4-FIGURE DISPLAY B SALT WARNING LIGHT (operates only on some models) C RINSE AID WARNING LIGHT (on some models only) D START/PAUSE BUTTON E OPTIONS LIGHT

PROGRAMS TABLE

The manual contains the programs table for several models. T o find the table for your dishwasher, compar e the program symbols at the top of the table with those on your control panel.

User instructions

PROGRAMS TABLE

PROGRAMME

NUMBER

& SYMBOL

1 SOAK

2 NORMAL

ECO (*)

3 ECO

4 AUTO 60-70

5 SUPER

LOAD CROCKERY AND

CUTLERY

Pans and dishes awaiting

completion of the load

Crockery and cutlery

normally soiled

Dishes with normal dirt,

even with dried-on

Pans and dishes with normal dirt, even with

dried-on residues

Very dirty pans and

dishes, even with dried-on

residues

residues.

PROGRAM

PROGRESS

Cold prewash

DURATION

MINUTES

(1)

CONSUMPTION

WATER LITRES

15' 3,5 0,02

Cold prewash Wash at 45°C Rinse at 45°C

147’ 12,6 0,71

Dry Cold prewash

Wash at 55°C Rinse at 70°C

100’ 11 1,3

Dry

The prewash and the washing temperature are decided automatically depending on the type and amount of dirt.

The program ends with a final drying phase.

Hot prewash Wash at 70°C Cold rinse (2) Rinse at 70°C Dry

155'

15,5 1,60

POWER KWh (1)

Reference program as per AS/NZS 2007.

Only run the soak program with partial loads.

(1) The cycle duration and power consumption may vary according to the water and

room temperatures, and the type and amount of dishes.

(2) 1 or 2 cold rinses depending on the model.

If the dishwasher door is open or not properly closed, the w ashing cycle will not start.

User instructions

QUICK TIME PROGRAMS

(see relevant section for explanation of functioning modes)

PROGRAMME

NUMBER E

SYMBOL

6 RAPID 27’

7 ECO

QUICK

8 AUTO 40-50

9 STRONG

and FAST

LOAD CROCKERY AND

CUTLERY

Dishes with light dirt,

washed immediately after

use

Dishes with normal dirt,

washed immediately after

use.

Dishes with normal dirt,

washed immediately after

use.

Mixed dishes with normal

dirt without dried-on

residues.

PROGRAM

PROGRESS

Wash at 38°C Rinse at 50°C

Cold prewash Wash at 55°C Cold rinse Rinse at 70°C

The prewash and the washing temperature are decided automatically depending on the type and amount of dirt.

The program ends with a final drying phase.

Wash at 65°C Cold rinse Rinse at 70°C

DURATION

MINUTI

(1)

27'

80’

55'

CONSUMPTION

WATER LITRES

POWER KWh (1)

6,5 0,70

12,5 1,25

9,5 1,35

(1) The cycle duration and power consumption may vary according to the water and

room temperatures, and the type and amount of dishes.

If the dishwasher door is open or not properly closed, the w ashing cycle will not start.

User instructions

3.3 Washing programs

The dishwasher is equipped with a control panel and an INFORMATION DISPLAY (9) from which it is possible to carry out all the po wer switch-

on, switch-off and programming operations.

Before starting a washing program make sure that:

• The water supply tap is open.

• The correct amount of detergent has been added to the

dispenser.

• The baskets have been correctly loaded.

• The spray arms are able to rotate freely and without

obstruction.

• The dishwasher door is securely closed.

By pressing the relative button of desired program (see tab le) it will lid up

LIGHTING

Pressing the ON/OFF button (1) will start the dishwasher and will lit up the dishwasher pilot light (7). After approximately 3 second from this operation the DISPLAY (9) will be turned on with a visualization that will depend upon the state of the dishwasher.

PROGRAMMING

All the programming operations are possible only with closed door. With open door, on the DISPLAY (9) will appear - - : - -.

SELECTION PROGRAM

The program selection is possible through the relative buttons (2).

the relative pilot light to confirm that the operation did occurred on the DISPLAY (9) will appear a program duration forecasting (“h.mm”).

User instructions

START PROGRAM

At this point, in order to start the machine, it is only enough to press the

START/PAUSE (6) for some seconds until the symbol START/PAUSE (D) start to flash and confirmation “beep” is heard. From this moment the

cycle duration on the DISPLAY (9) starts to decrease. This phase, that updates itself during the cycle, is “indicative” since it is influenced by the washing conditions such as dishwasher type and quantity, entry temperature etc. For this reason it is normal to s ee the updating during a program (increment and decrease of minutes) specially in the passage from one phase to the other (for example, from washing to rinse).

END PROGRAM

The end of the program is indicated by a short signal acoustic and from the “End” visual notification on DISPLAY (9). By pressing one of the buttons, the “End” visual signal will vanish from the display and the dishwasher is ready to continue a new cycle.

INTERRUPTING

In order to interrupt a running program it is necessary:

A PROGRAM

• to press the START/PAUSE (6) for some seconds until when the symbol START/PAUSE (D) remains lit on the display (confirmation beep). At this point,it is possible to start the cycle again, otherwise:

•

TO CHANGE A PROGRAM

To change the running program it is necessary:

• to interrupt the running program (see “INTERRUPTING A PROGRAM”);

• select the new program;

• to press again the START/PAUSE button (6) to make start the new

program.

User instructions

STOPPING A PROGRAM

To cancel a program which is running:

• Interrupt the program (see "

INTERRUPTING A PROGRAM")

• Press the START/PAUSE button (6) and hold it down; the

display will show "P0" and the dishwasher will immediately switch to the end of the cycle and drain the tank (during this process, the "START/PAUSE symbol (D) will flash). When the drain procedure ends, the end of cycle "End" message appears on the display.

In case that the door is opened during the oper ation, to the next door closing it is going to be necessary to start the program as shown in paragraph “STARTING THE PROGRAM”. The program will resume from the point in which it was interrupted.

In case that the tub temperature is higher than 50°C the program will start about 60 seconds later.

User instructions

PROGRAM DELAY

The PROGRAM DELAY button can be pressed to delay the start of the washing program by from 1 to 12/24 hours depending on the model. This option allows the dishwasher to be operated at the time of day of the user's choice. The first time the PROGRAM DELAY button is pressed the option light comes on and 1:h appears on the DISPLAY (9). The button can then

be pressed again, to set the delay required (

2:h, 3:h, … etc.). If no button is

pressed for a few seconds, the DISPLAY (9) shows the time left (time remaining) to the end of the selected program (e.g.

5:40, duration of the

washing cycle + program delay). When the user confirms the program start (read the relative section) a prewash will be carried out, after which the PROGRAM DELAY set will begin, and the time remaining on the DISPLAY will gradually be counted down. At the end of the delay set, the option light goes out and the washing cycle starts.

N.B.: It is not possible to select the PROGRAM DELAY option once the cycle has begun.

Chosen the delay, proceed with the program start, press the button START/PAUSE (6) for same seconds until the START/PAUSE (D) symbol start to flash. The machine will perform a dish pre-washing, and when finis h, the “delay program” will enter in function as it was first set.

In case you want to put to zero the “delay program” within the running program it is necessary:

• to press the START/PAUSE (6) button for some seconds until the START/PAUSE (D) symbol remain lid up on the display;

• to press the DELAY PROGRAM (5) more times until the reset of the delay program (START/PAUSE (D) symbol shut off);

• to press the START/STOP (7) button to make start the program.

N.B.: It is not possible to select the “delay program” when the program

have already began.

User instructions

OPTIONS (available in all programs except the soak program) The options are controlled by the OPTION

SELECTION button (3).

Press the button to access the procedure, confirmed by flashing of one of the OPTIONS lights (E).

N.B.: The PROGRAM DELAY light only comes on when the specific PROGRAM DELAY button (5) is pressed.

Press the SELECT OPTIONS button (5) again to display the next option . To confirm an option, press the CONFIRM OPT ION b utton (6) (the light stops flashing and remains on). This operation can be carried out for one or all of the options available. To deactivate an option which has already been confirmed, press the OPTION SELECTION button (3) un til the OPTION LIGHT required flashes, and press the CONFIRM OPTION button (6). The light stops flashing and goes out.

All options except "3in1" are disabled at the end of the w ash cy cle.

QUICK TIME PROGRAMS

Select this option together with any washing program (except the soak program) to SHORTEN the cycle. To activate this option, press button (light comes on) after selecting the program required. The option is automatically deactivated at the end of the program.

HYCLEAN

Increases the temperature of the final hot rinse to 70°C to ensure a further reduction in the bacteria le vel. If the temperature in the tank falls durin g this stage of the program (e.g. because the door is opened or due to a power blackout), the light of the option and the program lights flash to warn that the additional washing phase has not been completed successfully. This does not mean that the wash program has been less effective than usual.

User instructions

"Flexi Tabs"

The option is optimised for use of detergents which are complete with salt and rinse aid, known on the market as, "triple action", etc. With this option activated, any salt and rinse aid If you wish to use detergents which already contain salt and rinse aid alread y in the dishwasher will not be used.

- N.B.: even with the "Flexi Tabs" option selected, the

regenerating salt/rinse aid lights will still stay on if their containers are empty.

IMPORTANT: when no longer required, the option must be disabled (the light goes out).

If the water hardness has been set on a value above H3, and the “Flexi Tabs” option is activated, the relative light flashes, warning of a setting error. This products are not suitable for use with very "hard" water; this does not prevent the use of the option, but the washing results might not be of the best.

SPREAD HALF LOAD Suitable when there are not many dishes to be washed, it saves energy and reduces the program duration. Place dishes in both baskets then load the detergent dispenser than less than the normal amount for a full load.

User instructions

TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT

• Always try to run the dishwasher fully loaded.

• Do not wash the dishes in running water.

• Use the washing program that is most appropriate for each type of

load.

• Do not carry out any preliminary rinsing.

• If available, connect the dishwasher to a hot water supply up to

60°C.

TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT

The phosphates contained in dishwasher det ergents are harmful to the environment. To avoid using excessive amounts of detergent and to save on electricity, observe the following:

• separate the more delicate items from dishes that are more

resistant to aggressive detergents and high temperatures;

• do not pour the detergent directly on the dishes.

REMOVING THE DISHES

At the end of the washing program, wait at least 20 minutes before removing the dishes, to allow them to cool down. To prevent any water droplets on the upper basket from falling on the dishes in the lower basket, it is advisable to unload the lower basket first, and then the upper basket.

4. Operating instructions

User instructions

Once the dishwasher has been correctly installed, prepare for use as follows:

• Adjust the water softening system; (present only on some models)

• Add the regenerating salt;

(only on some models)

• Add the rinse aid and detergent.

4.1 Using the water softening system (only on some models)

The amount of scale contained in the water (water hardness index) can cause whitish staining on the dry dishes, which tend to become dull over time. The dishwasher is equipped with an automatic softening system which uses a special regenerating salt to reduce the hardness

SALT

of the water. The dishwasher is factory set for water hardness level 3 (average hardness 41-60°dF – 24-31°dH).

When using water of medium hardness, th e regenerating salt container should be refilled after approximately 20 washing cycles. The salt container can hold approximately 1.7 Kg of salt in grains. T he container is situated at the bottom of the dishwasher. After removing the lower basket, unscrew the salt container cap by turning it anticlockwise and pour in the salt using the funnel supplied with the dishwasher. Before replacing the cap, remove any salt residues from around the opening.

• When using the dishw asher for the first time, in addition to the salt it

is also necessary to add one litre of water to the container.

• Each time the salt container is refilled, make sure that the cap is

securely closed. The mixture of water and detergent must never

penetrate the salt container, as this would compromise the operation of the regeneration system. In the event of this occurring, the warranty will be invalidated.

• Only use regenerating salt specially formulated for domestic

dishwashers. If using salt tablets, do not fill the container completely.

User instructions

• Do not use table salt as it contains insoluble substances which,

over time, may damage the water softening system.

• When necessary, refill the regenerating salt container before

starting the washing program. In this way, the excess saline

solution will be immediately removed by the water; the prolonged presence of salt water inside the tank may lead to corrosion.

Be careful not to confuse the salt and detergent packages; adding detergent to the salt container will damage the water softening system.

ADDITIONAL FUNCTIONS

(available in all programs except the soak program)

(Customizing the consumer parameters)

The electronic control system allows personalizing the machine use directly through a programming procedure not directly accessible that allows: regulate water hardness level.

To access the programming environment, the appliance must be turned on with the door open. Then proceed as follows:

• press the PROGRAM DELAY button (5 ) until the H symbol appears

on the display, followed by the numb er cu rrently se t (e .g. H3)

• press the PROGRAM DELAY (5) button the number of times

needed to select the right setting level for the hardness of the water (H0, H1, H2, H3, H4, H5);

N.B.: after few seconds the appliance exits the parameter setting menu automatically.

User instructions

WATER HARDNESS TABLE

German degrees (°dH) French Degrees (°dF)

0 - 4 0 - 7

5 - 15 8 - 25

WATER HARDNESS

SETTING

H 1

NO SALT

H 1

16 - 23 26 - 40

24 - 31 41 - 60

32 - 47 61 - 80

48 - 58 81 - 100

Contact your local water board for information on the hardness of your

water supply.

After adjustment or display of the current setting, sim ply do not touc h the

button for a few seconds; the dishwasher will automatically return to standard mode, quitting the adjustment mode.

4.2 Using the rinse aid and detergent dispensers

The detergent and rinse aid

dispensers are situated on the inner part of the door: the detergent

dispenser is on the left, and the rinse aid dispenser is on the right.

With the exception of the SOAK program, before every washing cycle it is necessary to add the required amount of deter gent to the detergent dispenser. The rinse aid, on the other hand, should on ly be added as required.

H 2

H 3

H 4

H 5

User instructions

ADDING THE RINSE AID

The rinse aid helps the dishes dry faster and prevents the formation of scale deposits and staining; it is automatically added to the water during the final rinse cycle, from the container situated on the inner side of the door.

To add rinse aid:

• Open the door.

• Rotate the container cap anticlockwise by ¼ of a turn and remove it.

• Add the rinse aid until the container is full (approximately 140 cc).

The optical level indicator on the side of the cap should be completely obscured. Refill the rinse aid when the optical level indicator becomes clear again, or when the rinse aid warning li ght illuminates.

• Replace the cover and turn it i n a clockwise direction.

• Use a cloth to remove any spillage of rinse aid which migh t lead to

the formation of excess foam.

ADJUSTING THE RINSE AID DISPENSER SETTING

The dishwasher is factory set for medium water hardness. However it possible to change the setting by turning the dispenser’s selector to the desired position: the amount of rinse aid dispensed is proportion al to the selector position.

• To adjust the rinse aid setting, rotate the dispenser cap th rough a

quarter turn in an anticlockwise direction and remove it.

• Then use a scre wdriver to rotate the ri nse aid sel ector to the des ire d

position.

• Replace the cap, turning it cloc kwise.

• The amount of rinse aid must be increased if the w ashed dishes

appear dull or feature circular stains.

• If, on the other hand, the dishes are sticky or have white streaks, it

is necessary to reduce the rinse aid setting.

User instructions

ADDING THE DETERGENT

To open the detergent dispenser cap, lightly press the button P. Add the detergent and close the cap carefully. During the washing cycle, the dispenser will be opened automatically.

• When a program with hot prewash is selected (see program table),

extra detergent must be placed in the cavity G/H (depending on models).

• Use only detergents specially formulated for dishwashers. For

optimal washing results it is important to use a good qualit y deterg ent.

• The detergent packs must be sealed and stored in a dry place to

prevent the formation of lumps which may n egatively affect washing results. Once opened the detergent packs should not be kept for too long, otherwise the detergent loses its effectiveness.

• Do not use detergents formulated for washing dishes by hand,

because they produce a great deal of foam and may negatively affect the operation of the dishwasher.

• Add the correct amount of detergent. An insufficient amount of

detergent will result in a partial removal of dirt from the dishes, whereas an excessive amount is wasteful and does not improve the washing results.

• The market offers liquid and powder detergents with diffe ri ng chemical

compositions, which may con tain phosphates, or be phosphate-free but contain natural enzymes.

- Detergents containing phosphates are more effective against

grease and starch at temperatures above 60°C.

- Enzyme detergents, on the other hand, are also effective at lower temperatures (from 40 to 55°C) and are more easily biodegradable. With enzyme detergents it is possible to obtain at low temperatures co mparable results to those which can o nly be achieved at 65°C using traditional detergents.

For the safeguarding of th e environment we recommend the use of phosphate- and chlorine free detergents.

User instructions

The introduction of detergent into the rinse aid dispenser, ev en in liquid form, will damage the dishwasher.

4.3 General warnings and recommendations

Before using the dishwasher for the first time, it is advisable to read t he following recommendations concerning dish types to be washed and their loading. There are generally no constraints on the washing of domestic d ishes, but in certain cases it is necessary to take their characteristics into account.

Before loading the dishes into the baskets it is necessary to:

• remove coarse food remains: e.g. bones, fish-bones, etc. which may clog the filter or damage the wash pump.

• soak any pots or pans with burnt-on foo d remains on the bottom to facilitate removal, then load them into the LOWER BASKET.

There is no need to pre-wash the dishes under running water before loading them into the baskets since this only wastes water.

Correct loading of the dishes helps ensure optimal washing results.

WARNING!

User instructions

• Make sure that the dishes are securely in pl ace so that they cannot tip over or obstruct the rotation of the spray arms during the washing cycle.

• Do not place v ery small objects in the baskets as these could fall and obstruct the spray arms or the wash pump.

• Containers such as cups, bow ls, glasses and pots should always be loaded with the opening facing downwards and with any cavities at an angle, to allow the water to drain out.

• Do not stack dishes or place them in such a w ay that they cover one other.

• Do not place glasses to o close together because they may knock against each other and break, or there might be staining at the point where they touch.

MAKE SURE that the items being washed are dishwasher-safe. Items which are not dishwasher-safe:

• Wooden dishes, pots or pans: these may be damaged by the high washing temperatures.

• Handcrafted items: these are rarely suitable for washing in a dishwasher. The relatively high water temperatures and the detergents used may damage them.

• Plastic dishes: heat resistant plastic dishes must be washed in the upper basket.

• Dishes and objects in copper, tin, zinc or brass: these tend to stain.

• Aluminium dishes: items made from anodised aluminium may lose their colour.

• Silverware: silver items may stain.

• Glass and crystal: in general, glass and crystal objects can be

washed in the dishwasher. However, certain types of glass and crystal may become dull and lose their clearness after many washings. Therefore, for these items we recommend using the least aggressive program available.

• Decorated items: the decorated objects available on the market are generally able to withstand washing in the dishwasher, although the colours may fade after a great many washes. If in doubt as to the fastness of the colours, it is advisable to wash just a few items at a time for approximately one month.

User instructions

4.4 Using the baskets

The dishwasher has a capacity of 14 place-settings, including serving dishes.

LOWER BASKET

The lower basket receives the full force of the lower spray arm, and should therefore be used for the “toughest” items with a heavier degree of soiling.

All types and combinations of loads are permitted, provided that the dishes, pots and pans are arranged with all the soiled surfaces exposed to the water jets coming from the bottom.

With fixed supports

To make the most of the space inside the basket when loading large items, certain models are equipped with tip-up supports f or plates in 2 or 4 sections.

BOTTOM BASKET INSERTS

With tip-up supports

Some models are equipped with bottom basket inserts which improve the drying of dishes. The inserts are supplied in the accessories bag; to use them, simply fit them into place as shown.

User instructions

LOADING THE LOWER BASKET

Carefully load flat plates, soup plates, dessert and serving dishes, positioning them vertically. Pots, pans and their covers must be loaded upside down. When loading soup plates and dess ert bowls, be sure to leave a gap between them.

Loading examples:

CUTLERY BASKET

The basket has removable top grids into which items of cutlery should be inserted to keep them properly spaced and allow water to pass between them effectively. The top grids and central lid are in the bag of accessories. The central lid functions as a lid only. The top grids can be detached and used separately. The cutlery should be arranged in an orderly manner inside the basket, with the handles pointing downwards. Take care during loading to av oid injury from the knife blades. The basket is suitable for all types of cutlery, except those long enough to interfere with the upper spray arm. Ladles, wooden spoons and cooking knives can b e placed in the upper basket, making sure that the knife blades do not protrude from the basket.

User instructions

The cutlery basket slides across the dish washer and can be placed in any position to allow optimal use of the space in the bottom basket.

UPPER BASKET

It is recommended to load the upper basket with small- or medium-sized items such as glasses, small plates, tea or coffee cups, shall ow bowls and light objects made from heat resistant plastic. If the upper basket is used in the lowermost position, it can also be loaded with ser ving dishes, provided they are only slightly soiled.

LOADING THE UPPER BASKET

Load plates facing forward; cups, bowls etc. must always be facing downwards. The left side of the basket can be loaded with cups and glasses on two levels. In the centre section, plates and saucers can be loaded vertically into the supports provided.

Loading examples:

User instructions

Depending on the models, the basket may be equipped with some or all of the following accessories:

- Supports for cups or long objects (ladles, spoons…), on the left; can be tipped to the vertical position when not in use.

- Long-stemmed glass holder, on the left; to use, simply lift and fix onto the hooks provided.

- Cutlery racks, on the right, designed for knives and teaspoons; for teaspoons, pull out the sliding support. The racks can be tipped to the vertical position when not in use.

- Fixed or movable racks in the middle. The movable supports can be fixed vertical, resting on the bottom of the basket when not in use, or set in the intermediate position, as required.

User instructions

ADJUSTING THE UPPER BASKET

The height of the top basket can be adjusted to allow large dishes or pans to be placed in the bottom basket. The adjustment procedure may be type A or B, depending on the dishwasher model purchased.

Version A: pull-out with adjustment in two positions.

• Pull out both the basket guides.

• Remove the stops, first releasing them as shown in the diagram.

• Pull out the basket.

• Fit the upper or lower pair of wheels int o the guide, depending on

the setting required

;

• Return the stops to their original position. The left hand and right hand sides of the basket must alw ays be set at

the same height.

Version B: with adjustment in three positions on both sides. The sides of the basket must always be set at the same height.

• Raise the basket by pulling on the top edge (1), to the first or second catch depending on the height required.

• To lower the basket, first release it by pulling the release lever (2).

Adjustment is also possible with the basket loaded, but in this case when lowering the basket it should be held steady with one hand to avoid knocking the dishes.

5. Cleaning and maintenance

User instructions

Before carrying out any work, always unplug the appliance from the electrical supply or switch off the all-pole disconnection device.

5.1 General warnings and recommendations

Avoid the use of acidic or abrasive detergents.

Clean the outer surfaces and door-lining of the dishwasher regularly using a soft cloth moistened with water or with a normal detergent suitable for painted surfaces. Clean the door gaskets with a damp sponge. Periodically (once or twice a year) it is a dvisable to clean the tank and gaskets, using a soft cloth and water to remove any deposits.

CLEANING THE WATER INTAKE FILTER

The water intake filter A located at the outlet of the water supply tap needs to be cleaned periodically. After having closed the water supply tap, unscrew the end of the water intake hose, remove the filter A and clean it delicately under running water. Reassemble filter A in its seat and carefully screw the water intake hose back into position.

CLEANING THE SPRAY ARMS

The spray arms can be easily removed for periodic cleaning of the nozzles, to prevent possible clogging. Wash them under running water and carefully replace them in their seats, checking that their rotary movement is in no way impeded.

• To remove the upper spray arm, unscrew locking ring R.

• To remove the lower spray arm, simply lift it up, pulling by the

central part.

• To remove the orbital spray arm assembly, take h old of the longer arm and pull the orbital unit upward. Wash the arms under a jet of running water and return them carefully to their seat. After reassembly, check that the spray arms turn freely. Otherwise, check that they have been installed correctly.

ORBITAL

User instructions

CLEANING THE FILTER UNIT

• It is advisable to periodically inspect the centre filter C and, if necessary, to clean it. To remove the filter, grip the tabs, turn them anticlockwise and lift upwards;

• push the centre filter D from the underside to remove it from the micro-filter:

• separate the two parts which make up the plastic filter by pressing the body of the filter in the zone shown by the arrows;

• remove the centre filter by lifting it upwards.

GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE:

• The filters should be cleaned under running water using a stiff brush.

• When removin g the filter, take care that there are no food residues on it. If any residues fall into the washing pit they might block hydraulic components, or foul the spray arm nozzles.

• It is essential to thoroughly clean the filters according to the above instructions: the dishwasher cannot function if the filters are clogged.

• Carefully replace the filters in their seats, to avoid damaging the wash pump.

PROLONGED DISUSE:

• Run the soak program twice in succession.

• Unplug the power cord from the socket.

• Leave the door slightly open, in order to prevent the formation of

unpleasant odours inside the washing tank.

• Fill the rinse aid disp enser.

• Shut off the water supply tap.

User instructions

BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE:

• Check that there are no deposits of sludge or rust inside the water pipe: if there are, allow the water to run from the water supply tap for a few minutes.

• Plug the power cord back into the socket.

• Reconnect the water in take hose and open the tap again.

TROUBLESHOOTING MINOR PROBLEMS

In some cases it is possible to remedy minor problems by referring to th e following instructions:

If the program fails to start, check that:

• the dishwasher is connected to the electrical power supply;

• there is no power failure;

• the water tap is open;

• the dishwasher door is properly closed.

If water remains inside the dishwasher, check that:

• the drain hose is not kinke d;

• the drain siphon is not obstruc ted;

• the dishwasher filters are not clogged.

If the dishes are not being cleaned properly, check that:

• the correct amount of detergent has been added;

• there is regenerating salt insid e the special container;

• the dishes are being loaded correctly;

• the selected program is suitable for the dish types and their degree

of soiling;

• all the filters are clean an d positioned correctly;

• the spray arm nozzles are not obstructed;

• there is no object obstructing the rotation of the spray arms.

User instructions

If the dishes fail to dry or remain dull, check that:

• there is rinse aid insi de the special container;

• the rinse aid dispenser setting is correct;

• the detergent used is of good quality and has not lost its

effectiveness (for example, through incorrect storage, with the box left open).

If the dishes show signs of streaking, staining, etc., check that:

• the rinse aid dispenser setting is not too high.

If there are visible traces of rust inside the tank:

• the tank is ma de of steel, and therefore any rust marks are due to external elements (fragments of rust from the water pipes, pots, cutlery, etc.). Special products are commercially available to remov e such marks;

• check that the amount of detergent being used is correct. Certain detergents can be more corrosive than others.

• check that the cap of the salt container is securely closed, and that the water softening setting is correct.

If after following the above troubleshooting instructions the problem persists, call the nearest After-Sales Centre.

WARNING: any operations performed on the appliance by unauthorised persons are not covered by the warranty and shall be paid for by the user.

User instructions

6. Troubleshooting

The dishwasher is equipped with a self-diagnostics system that is

capable of detecting and signalling a number of possible faults.

TABLE OF FAULTS DETECTED BY THE SELF-DIAGNOSTICS SYSTEM

FAULT DESCRIPTION

Er 01

The anti-flooding system (where present) has been tripped service.

Er 02

Er 03

Er 04

Er 05

Er 06

Er 07

Er 08

Er 09

The water level limitation system has tripped. The appliance cannot heat the water. The temperature sensor is disconnected. The appliance cannot take in the water. The appliance cannot drain the water from the tank. The dishwasher cannot measure the precise water quantity that has

been loaded. Problem on the water distribution system to the baskes.

Water intake system malfunction.

If an alarm occurs the appliance interrupts the program in progress and signals a fault.

• Alarms E1, E2, E3, E4, E8 and E9 interrupt the current program

immediately.

• The E5, E6 alarms interrupts the running program once the cause is

resolved, it will bring bach the execution of the program.

• The alarm E7 is visualized at the end of the cycle that comes, however,

brought to the end since the operation of the dishwasher is not harmed.

To “reset” an alarm is necessary:

• Open and close the door, or turn off and on the machine. At this point is

possible to program the dishwasher again.

If the malfunction persists, contact your authorised Service Centre.

User instructions

TECHNICAL DATA

Width Depth measured flush with the

outer edge of the control panel

Height (depending on models)

Capacity Water supply pressure Electrical characteristics

597 ÷ 599 mm Free standing: 600 mm

Semi-integrated: 570 mm Free standing: from 850 mm to 890 mm

from 890 mm to 930 mm Semi-integrated: from 820 mm to 890 mm from 860 mm to 930 mm

14 Standard place settings min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar) See rating plate

115 125

Misurare l’altezza del pannello comandi; fare coincidere l’indice relativo a tale valore con il profilo superiore della porta in legno; tracciare il posizionamento degli agganci porta.

Measure the height of the control panel; bring the mark relating to this value into line with the top edge of the wooden door; mark the positions of the door connections.

Measurer la hauteur du panneau de commandes; faire coïncider l’index relatif à cette valeur avec le profil supérieur de la porte en bois; tracer le positionnement des crochets de la porte.

Die Höhe des Bedienfelds messen; Die diesem Wert entsprechende Markierung mit dem oberen Profil der Holztür zur Deckung bringen; Die Position der Türaufhängungen anzeichen.

Meet de hoogte van het bedieningspaneel; laat de markering die bij die waarde hoort overeenstemmen met het bovenste profiel van de houten deur; teken de positie van de deurhengsels af.

Medir la altura del panel de mandos; hacer coincidir el índice correspondiente a dicho valor con el perfil superior de la puerta de madera; trazar el posicionamiento de las bisagras de la puerta.

Meça a altura do painel de comandos; faça com que o indicador relativo a este valor coincida com o perfil superior da porta de madeira; marque a posição dos ganchos para porta.

115

125 135 145 155

ATTENZIONE:

"H"

Quota : secondo i modelli 820÷890 oppure 860÷930.

CAUTION:

Depending on the model, distance may be 820÷890 or 860÷930.

ATTENTION:

“H”

Cote : selon les modèles 820÷890 ou 860÷930.

ACHTUNG:

Maß : gemäß den Modellen 820÷890 oder 860÷930.

"H"

LET OP:

Hoogte : voor de modellen 820÷890 of 860÷930.

"H"

ATENCIÓN:

Cota : según los modelos 820 ÷ 890 o bien 860 ÷ 930.

"H"

ATENÇÃO:

"H"

1 2 3 4 5

567

min. 567min.

820/860

min. 820/860min.

600

SUPERIORE

LATO SUPERIORE

LATO

SUPERIEURE

BORD

BORD SUPERIEURE

UPPER

UPPER EDGE

OBERKANTE

EDGE

Solo

Solo su alcuni modelli. Certain models only.

su alcuni modelli. Certain models only.

Seulement sur certains modèles. nur bei einige Modellen.

Seulement

Sólo en algunos modelos. alleen indien van toepassing

Sólo

sur certains modèles. nur bei einige Modellen.

en algunos modelos. alleen indien van toepassing

x8x 8

x2x 2

6 7

A/B: secondo i modelli-depending on models-

selon les modèles-je nach Modellsegún los modelos-beroende på modell

0,0 mm

598

522

130

SUPERFICIE

SUPERFICIE INTERNA SURFACE INTERNE

SURFACE

INNER SURFACE

INNER

INNENFLACHE

INTERNA

INTERNE

SURFACE

m 0,5

min. 0,5 mmin.

m 0,4

min. 0,4 mmin.

1,10

max. 1,10 mmax.

0,3-10 bar0,3-10 bar

1/2”

S N SF

3/4”

m 1,25 m1,25 m

1,14 m1,14

m 1,50 m1,50 m

1,23 m1,23

m 1,66 m1,66 m

1,78 m1,78

720

max 720 mmmax

0,3-10 bar0,3-10

0,00

min. 0,00 mmin.

135

145

155

bar

m 0,4

min. 0,4 mmin.

UPOZORNĚNÍ: Rozměr „H“ podle modelů 820-8 0 nebo 8 0- 0.

9693

BEMÆRK:

Afhængigt af modellen er målet ”H” 820÷890 eller 860÷930.

HUOMIO

Mitta ”H” on mallista riippuen 820-890 tai 8 0- 0.

OPGELET

Geef "H" aan volgens de modellen 820÷890 of 8 0÷ 0.

693

ADVARSEL:

Avhengig av modell kan avstanden "H" være 820-890

693

eller 8 0- 0.

UWAGA

W zależności od modelu, wartość „H” może wynosić

- 6 -93

820 8 0 lub 8 0 0.

POZOR:

Kvóta “H” podla modelov 820-890 alebo 8 0- 0.

693

OBSERVERA!

Beroende på modell kan måttet ”H” vara 820-890 eller

693

80- 0.

19 570 0081 02

NOTA:

Solamente alcuni modelli sono dotati di

uno dei dispositivi sotto illustrati.

N.B.:

Only some models are equipped with one

of the two devices illustrated below.

REMARQUE:

seul quelques modèles sont munis

de l’un de deux dispositifs illustrés ci-dessus.

ANMERKUNG:

Nur einige Modelle verfügen über

eine der beiden unten dargestellten Einrichtungen.

NOTA BENE:

uitsluitend bepaalde modellen zijn uitgerust met één van de twee onderstaand afgebeelde inrichtingen

NOTA:

Sólo algunos modelos están equipados con uno de los dos dispositivos que se ilustran a continuación.

NOTA:

Só alguns modelos estão equipados com ou dos dois dispositivos ilustrados abaixo

Solo su alcuni modelli. Certain models only.

Seulement sur certains modèles. nur bei einige Modellen.

Seulement Sólo

Sólo en algunos modelos. alleen indien van toepassing

Solo su alcuni modelli - Certain models only

Solo

Seulement sur certains modèles - nur bei einige Modellen

11 13 14

Seulement Sólo

Sólo en algunos modelos - alleen indien van toepassing

sur certains modèles. nur bei einige Modellen.

en algunos modelos. alleen indien van toepassing

su alcuni modelli - Certain models only

sur certains modèles - nur bei einige Modellen

en algunos modelos - alleen indien van toepassing

2/4

x 2 (sx-dx)

Regolazione vite tensione molle - Door spring Adjustement device -

Réglage des ressorts de la porte -

Réglage Vorrichtung

Vorrichtung für die Einstellung der Spannung der Türfedem.

des ressorts de la porte -

für die Einstellung der Spannung der Türfedem.

Solo su alcuni modelli - Certain models only

su alcuni modelli - Certain models only

Solo

Seulement sur certains modèles

Seulement Nur

Nur bei einige Modellen - Sólo en algunos modelos

alleen

alleen indien van toepassing

sur certains modèles

bei einige Modellen - Sólo en algunos modelos

indien van toepassing

IT-Sicurezza contro gli allagamenti

IT-Sicurezza

Questo

Questo sistema di sicurezza protegge il vostro appartamento

danni dell’acqua. In caso di guasto al tubo di entrata o

da danni dell’acqua. In caso di guasto al tubo di entrata o

permeabilità

permeabilità del sistema della macchina, l’entrata dell’acqua

interrotta.

viene

viene interrotta.

scatola della sicurezza anti-allagamento montata sul tubo,

La scatola della sicurezza anti-allagamento montata sul tubo,

La contiene

contiene parti elettriche. E’ pertanto proibito collocare la

scatola

scatola stessa nell’acqua. Nel caso in cui per una ragione

qualsiasi

qualsiasi la scatola subisca danni, togliere immediatamente

presa di collegamento dalla rete elettrica.

la presa di collegamento dalla rete elettrica.

ES-Aquastop” por

ES-Aquastop” por septuplicado

El sistema “AQUASTOP” por septuplicado protegesu vivienda de forma

sistema “AQUASTOP” por septuplicado protegesu vivienda de forma

fiable e de danos por escapes de agua. Se corta inmediatamente el

e de danos por escapes de agua. Se corta inmediatamente el

fiable

suministro de agua en caso de cualquier fuga en tubos o en

suministro

componentes del aparato.

componentes

contiene

contiene componentes eléctricos. Por este motivo no debe sumergirse en agua. En caso de que el cajòn de vàlvulas estuviera

sumergirse

danado, debe desconectarse de la red eléctrica, desenchufando la

danado,

clavija.

SLO-AQUASTOP - Zaščita pred poplavo

SLO-AQUASTOP -

varnostni sistem varuje vaše stanovanje pred škodo, ki bi jo

Ta varnostni sistem varuje vaše stanovanje pred škodo, ki bi jo

povzro ila

povzro ila voda. V primeru okvare na dovodni cevi ali v primeru

puš anja

puš anja na sistemu pomivalnega stroja, se prekine dovod vode.

Ohišje

Ohišje ventila oz.

električ

škatla

škatla iz kakršnegakoli razloga poškoduje, nemudoma izklopite aparat

iz elektri nega omrežja.

HR AQUASTOP - Zašita pred poplavom

HR AQUASTOP -

Ovaj

Ovaj sigurnosni sistem štiti vaš stan od štete koju možeuzrokovati voda.

U slučaju kvara na dovodnoj cijevi ili u slučaju propuštanja na sistemu

stroja

stroja za pranje posuđa, prekida se dovod vode.

Ku ište

Ku ište ventila, odnosno sigumosne naprave, namještene na cijevi,

sadrži

sadrži elektri ne djelove.

Zato

Zato je ne smijete potopiti u vodu. U slu aju da se kutija iz bilo kojeg

razloga

razloga ošteti, odmah isklju ite aparat iz elektri ne mreže.

iz kakršnegakoli razloga poškoduje, nemudoma izklopite aparat

elektri nega omrežja.

sigurnosni sistem štiti vaš stan od štete koju možeuzrokovati voda.

slučaju kvara na dovodnoj cijevi ili u slučaju propuštanja na sistemu

za pranje posuđa, prekida se dovod vode.

elektri ne djelove.

je ne smijete potopiti u vodu. U slu aju da se kutija iz bilo kojeg

contro gli allagamenti

sistema di sicurezza protegge il vostro appartamento

del sistema della macchina, l’entrata dell’acqua

parti elettriche. E’ pertanto proibito collocare la

stessa nell’acqua. Nel caso in cui per una ragione

la scatola subisca danni, togliere immediatamente

septuplicado

de agua en caso de cualquier fuga en tubos o en

del aparato.

cajòn de valvulas del tubo acquastop

El cajòn de valvulas del tubo acquastop

componentes eléctricos. Por este motivo no debe

en agua. En caso de que el cajòn de vàlvulas estuviera

debe desconectarse de la red eléctrica, desenchufando la

Zaščita pred poplavo

voda. V primeru okvare na dovodni cevi ali v primeru

na sistemu pomivalnega stroja, se prekine dovod vode. ventila oz. ne

dele. Zato je ne smete potopiti v vodo. V primeru, da se ta

ne dele. Zato je ne smete potopiti v vodo. V primeru, da se ta

Varnostne

Varnostne naprave, ki je nameščena na cevi, vsebuje

naprave, ki je nameščena na cevi, vsebuje

Zašita pred poplavom

ventila, odnosno sigumosne naprave, namještene na cijevi,

ošteti, odmah isklju ite aparat iz elektri ne mreže.

čč

EN-Aquastop safety device

DA-Sikkerhed mod vandlækage

DA-Sikkerhed

sikkerhedssystem beskytter din lejlighed for vandskader.

Dette

Dette sikkerhedssystem beskytter din lejlighed for vandskader.

Tilførslen

Tilførslen af vand bliver afbrudt, hvis tilløbsslangen er defekt, eller

maskinsystemet er utæt.

hvis

hvis maskinsystemet er utæt.

Sikkerhedsboksen på slangen indeholder elkomponenter.

Sikkerhedsboksen

Boksen må derfor ikke anbringes i vand.

Boksen

boksen bliver beskadiget, skal stikket øjeblikkeligt tages

Hvis boksen bliver beskadiget, skal stikket øjeblikkeligt tages

Hvis

af stikkontakten.

ud af stikkontakten.

FI-Aquastop-turvajärjestelmä

turvajärjestelmä suojaa asuntoasi vesivahingoilta.

Tämä

Tämä turvajärjestelmä suojaa asuntoasi vesivahingoilta.

veden ottoletku tai koneen vesijärjestelmä vuotaa,

Jos

Jos veden ottoletku tai koneen vesijärjestelmä vuotaa,

vedenotto

vedenotto keskeytyy.

asennettu

asennettu letkuun ja se sisältää sähköosia.

laita koteloa veteen. Jos kotelo jostain syystä

Älä

Älä laita koteloa veteen. Jos kotelo jostain syystä

vahingoittuu,

vahingoittuu, kytke laite heti irti sähköverkosta irrotta

pistoke pistorasiasta.

alla

alla pistoke pistorasiasta. MK AQUASTOP - a

MK AQUASTOP - a

з штитен

Oboj a ro o a a.

з штитен систем штити вaши т cтaн oд пoпл в

Oboj a ro o a a.

cлyчajy н штeт в њ н д в днaтa цевк или

Bo a o y a e a o o a

cлyчajy н штeт в њ н д в днaтa цевк или пaк aкo

Bo a пpoпyштa систем

пpoпyштa систем в мaшинaтa з ми њ д ви, ce пpeкин в

ooo a oa. o e o

двдт

ooo a oa. o e o

д в д т н в д Кyкиштeт нa в нтл т oднocнo нa

c a pa ec e p

иrypнocнaт нaп вa кoja

c a pa ec e p

иrypнocнaт нaп вa кoja e нaм т нa нa цевкaтa, coд жи

лeктpични

eeoaceeea

eeoaceeeaja a.

лeктpични д л ви и з тoa нe м т д тoпите вo вoд

ce cл чи од билo кaкви п ичини кyкиштeт дa ce oштeти

Aкo

Aкo ce cл чи од билo кaкви п ичини кyкиштeт дa ce oштeти

птт

a apa o a y e ro e p a pe a.

п т т вeд нaш иcкл ч те oд лeкт ичнaт м ж

FR-Paliers de sécurités pour empecher les fuites

FR-Paliers

système est doté de sept paliers de sécuritè pour éviter les fuites

Le système est doté de sept paliers de sécuritè pour éviter les fuites

et protége ainsi votre logement contre d’eventuels dègats

d’eau

d’eau et protége ainsi votre logement contre d’eventuels dègats

matériels.

matériels. Si le tuyau d’arrivée d’eau n’est pas étanche ou si la

machine

machine fuit, ce dispositif arrete l’ecoulement d’eau.

sécuirité qui controle l’arrivée d’eau est situé sur le tuyau et

sécuirité contient

contient des parties électriques. Il ne faut donc pas le tremper

l’eau. S’il est endommagé pour une raison quelconque,

dans

dans l’eau. S’il est endommagé pour une raison quelconque,

débranchez

débranchez immédiatement l’appareil en retirant la prise.

mod vandlækage

af vand bliver afbrudt, hvis tilløbsslangen er defekt, eller

på slangen indeholder elkomponenter.

må derfor ikke anbringes i vand.

keskeytyy.

Aquastop-turvajärjestelmän kotelo on

Aquastop-turvajärjestelmän

kotelo on

letkuun ja se sisältää sähköosia.

kytke laite heti irti sähköverkosta irrotta

Заштитa

Заштитa oд пoплaв

oд пoплaв

систем штити вaши т cтaн oд пoпл в

oyaeaoo a

в мaшинaтa з ми њ д ви, ce пpeкин в

oaee

o a e e ca o y a

ca o y a

пaк aкo

н в д Кyкиштeт нa в нтл т oднocнo нa

e нaм т нa нa цевкaтa, coд жи

длвии з тoa нe м т д тoпите вo вoд

ypo,

ja a.

вeд нaш иcклчте oд лeктичнaт м ж

de sécurités pour empecher les fuites

Si le tuyau d’arrivée d’eau n’est pas étanche ou si la

Le boitier de

fuit, ce dispositif arrete l’ecoulement d’eau.

boitier de

qui controle l’arrivée d’eau est situé sur le tuyau et

des parties électriques. Il ne faut donc pas le tremper

immédiatement l’appareil en retirant la prise.

EN-Aquastop

The AQUASTOP is

The AQUASTOP is safety device. The aquastop assures

that

the fresh water hose need only take the stress of water

that the fresh water hose need only take the stress of water

pressure

pressure during the actual timer water is flowing. If the hose

should

should begin to leak during this time, the magnetic valve in

water spout cuts off the flow, and the hose is relieved of

the water spout cuts off the flow, and the hose is relieved of

the pressure.

pressure.

The valve casing on the water-stop hose contains

The electrically

electrically controlled components. It is should not,

therefore,

therefore, be submersed in water. If the housing

becomes

becomes damaged the plug must be removed from the

soket.

PT-Segurança

PT-Segurança contra os alagamentos

Este sistema de segurança protege o seu apartamento

Este

contra os danos provocados pela água. A entrada da água

contra

é interrompida em caso de anomalia no tubo de entrada

interrompida em caso de anomalia no tubo de entrada

ou de permeabilidade do sistema da máquina.

de permeabilidade do sistema da máquina.

A caixa de segurança anti-alagamento montada no tubo

A caixa contém

contém partes eléctricas. Não deve, por isso, ser mergulhada na água. Se, por algum motivo, a caixa ficar

mergulhada

danificada retire imediatamente a ficha da tomada.

danificada

safety device

safety device. The aquastop assures

during the actual timer water is flowing. If the hose

begin to leak during this time, the magnetic valve in

Operating

Operating pressure DIN 44995.

pressure DIN 44995.

valve casing on the water-stop hose contains

controlled components. It is should not,

be submersed in water. If the housing

damaged the plug must be removed from the

contra os alagamentos

sistema de segurança protege o seu apartamento

os danos provocados pela água. A entrada da água

de segurança anti-alagamento montada no tubo

partes eléctricas. Não deve, por isso, ser

na água. Se, por algum motivo, a caixa ficar

retire imediatamente a ficha da tomada.

SW 32

3/4”

Aquastop

Dieses

Dieses Wasserschutz-System schutz ihre Wohnung zuverlassing

vor

vor Wasserschaden. Bei undichtem Wasserzulaufschlauch oder

undichtem

undichtem Maschinensystem wird jeglicherweiterer Wasserzulauf

unterbunden.

beinhaltet

beinhaltet elektrisch gesteuerte Bauteile. Er darf deshalb nicht

in Wasser getaucht werden. Sollte das Ventilkastengehause

beschadigt

beschadigt sein, ist unbedingt der Netzstecker aus zu ziehen.

Aquastop-Verlägerung

Im Handel können längere Aquastopschläuche gekauft werden,

die

die von einem Fachmann mit dem bestehenden Aquastopschlauch

ausgetauscht

ausgetauscht werden müssen. Bei einer elgenmächtigen

Verlängerung

Verlängerung des Wasserzufuhrschlauches trägt der Hersteller

keine

keine weitere Verantwortlichkelt.

YU AQUASTOP - Заштитa пpeд пoплaвoм

Oaj a

вoдa. Y cлyчajy квapa нa вoдoвoднoj цеви или y cлyчajy прекидa ce

вoдa. Y cлyчajy квapa нa вoдoвoднoj цеви oвoдa вoдe. Кyћиште

oвoдa вoдe. Кyћиште вeнтиa oднocнo безбедноснe нaпрaвe, мoнтирaнe нa цеви, caджи eлeктpичнe дeлoвe. Затo нecмeте дa je

мoнтирaнe нa цеви, пoтaпњaтe вoд л чajy дa

пoтaпњaтe вoд л чajy дa ce кути из бил к зл o , o c y a apa e p .

min.10mm

Wasserschutz-System schutz ihre Wohnung zuverlassing

Wasserschaden. Bei undichtem Wasserzulaufschlauch oder

Maschinensystem wird jeglicherweiterer Wasserzulauf

Ventilkasten am Wasserstop Schlauch

Der Ventilkasten am Wasserstop Schlauch

Der

elektrisch gesteuerte Bauteile. Er darf deshalb nicht

Wasser getaucht werden. Sollte das Ventilkastengehause

sein, ist unbedingt der Netzstecker aus zu ziehen.

Handel können längere Aquastopschläuche gekauft werden,

von einem Fachmann mit dem bestehenden Aquastopschlauch

werden müssen. Bei einer elgenmächtigen des Wasserzufuhrschlauches trägt der Hersteller

weitere Verantwortlichkelt.

в безбедносни систем в ш стaн од штете коју може дa узpкоуje

в безбедносни

систем вшстaн од штете коју може дa узpкоуje

или y cлyчajy прекидa ce

вeнтиa oднocнo безбедноснe нaпрaвe,

caджи eлeктpичнe дeлoвe. Затo нecмeте дa je

y y. Yc y ja o or pa ora

yy.

штети дмax и књ чите п т

штети дмax и књ чите п т из лeкт ичнe мрeже

o c y a apa e p .

1/2”

3/4”

Yc y ja o or

ce кути из

бил к зл

из лeкт ичнe мрeже

Cu ø10

MIN

40cm

pa ora

NL-Dit veiligheidssysteem beveiligt uw woning tegen

NL-Dit waterschade.

waterschade.

Bij

Bij lekage in de aanvoerslang of in de machine zelf wordt de

wateraanvoer

wateraanvoer stopgezet. Het aflsuitmechanisme bevindt zich

in een doos op de aanvoerslang en bevat elektrische

componenten.

Daarom

Daarom is het verboden het doosje in water onder te

dompelen

dompelen .

Mocht

Mocht de doos beschadigingen vertonen, dan dient de

stekker

stekker onmiddellijk uit de contactdoos te worden

genomen

genomen om aldus de netverbinding uit te schakelen.

NO-Sikring mot oversvømmelse

NO-Sikring

Dette

Dette sikkerhetssystemet beskytter boligen din mot vannskader.

Dersom

Dersom det oppstår en feil på tilførselsrøret eller en lekkasje i

maskinen,

maskinen, vil vanntilførselen stenges.

Boksen med sikkerhetssystemet er plassert på slangen og

Boksen

inneholder elektriske deler. Boksen må derfor aldri dyppes

inneholder

i vann. Dersom boksen av en eller annen grunn blir skadet,

i må

må støpslet til maskinen snarest trekkes ut av

stikkontakten.

SK-Bezpeènost proti zatopeniu

SK-Bezpeènost

Tento

Tento bezpecnostny system chráni váš byt pred škodami

spôsobenými

spôsobenými vodou.

V prípade porušenia vstupnej rúry alebo priepustnosti na

systeme

systeme zariadenia, vstup vody sa pozastaví.

Bezpeènostná

Bezpeènostná skrinka proti zatopeniu namontovaná na

rúre

rúre obsahuje elektrické súèasti. Jet preto zakázané

umiestnit

umiestnit samotnú skrinku do vody. Ak sa skrinka z akasti.

Jet

Jet preto zakázané umiestnit samotnú skrin

Ak sa skrinka z akchkolvek dôvodov poškoddí,

ihned'

ihned' uskutočnite vypojenie z elektrickej siete.

veiligheidssysteem beveiligt uw woning tegen

lekage in de aanvoerslang of in de machine zelf wordt de

stopgezet. Het aflsuitmechanisme bevindt zich

een doos op de aanvoerslang en bevat elektrische

is het verboden het doosje in water onder te

de doos beschadigingen vertonen, dan dient de

onmiddellijk uit de contactdoos te worden

om aldus de netverbinding uit te schakelen.

mot oversvømmelse

sikkerhetssystemet beskytter boligen din mot vannskader.

det oppstår en feil på tilførselsrøret eller en lekkasje i

vil vanntilførselen stenges.

med sikkerhetssystemet er plassert på slangen og

elektriske deler. Boksen må derfor aldri dyppes

vann. Dersom boksen av en eller annen grunn blir skadet,

støpslet til maskinen snarest trekkes ut av

proti zatopeniu

bezpecnostny system chráni váš byt pred škodami

vodou.

prípade porušenia vstupnej rúry alebo priepustnosti na

zariadenia, vstup vody sa pozastaví.

skrinka proti zatopeniu namontovaná na

obsahuje elektrické súèasti. Jet preto zakázané

samotnú skrinku do vody. Ak sa skrinka z akasti.

preto zakázané umiestnit samotnú skrin

do vody.

ku do vody.

sa skrinka z akchkolvek dôvodov poškoddí,

uskutočnite vypojenie z elektrickej siete.

CS-Systém Aquastop proti vyplavení

CS-Systém Aquastop

bezpečnostní systém chrání váš byt před vyplavením.

Tento bezpečnostní systém chrání váš byt před vyplavením.

Tento

případě poruchy přívodní hadice nebo netěsnosti systému

V případě poruchy přívodní hadice nebo netěsnosti systému

spotřebiče

spotřebiče se přeruší přívod vody.

Těleso

Těleso bezpečnostního ventilu namontovaného na hadici

Aquastop

Aquastop obsahuje elektrické prvky a nesmí se proto

namáčet

namáčet do vody. V případě jakéhokoli poškození tělesa

ventilu

ventilu okamžitě vytáhněte zástrčku z elektrické zásuvky. SV-Säkerhetssystem mot översvämning

SV-Säkerhetssystem

Detta

Detta säkerhetssystem skyddar din lägenhet mot

vattenskador.

vattenskador. Om den ingående slangen går sönder eller om

maskinen

maskinen läcker vatten avbryts vattenintaget.

Lådan

Lådan med översvämningsskyddet som är monterad på slangen innehåller elektriska komponenter.

slangen Därför

Därför är det förbjudet att placera lådan i fråga i vatten.

Dra

Dra omedelbart ut stickkontakten ur eluttaget om lådan

skadas

skadas av någon anledning.

PL-System AQUA STOP

AQUA STOP to system zabezpieczający przed zalaniem.

AQUA STOP to

przypadku awarii węża doprowadzającego wodę lub

W przypadku awarii węża doprowadzającego wodę lub

nieszczelności

nieszczelności pralki, dopływ wody jest automatycznie

odcinany. Urządzenie

odcinany. Urządzenie zabezpieczające przez zalaniem

zamontowane

zamontowane na wężu zawiera części elektryczne i nie

może

może być zanurzane w wodzie. Jeśli z jakiegokolwiek

powodu

powodu urządzenie zostanie uszkodzone, należy

bezzwłocznie

bezzwłocznie odłączyć je od zasilania.

HU-

Az eláradás ellen védő biztonsági berendezés.

HU-

a biztonsági berendezés megvédi a lakást a víz okozta

Ez a biztonsági berendezés megvédi a lakást a víz okozta

károktól.

károktól. Ha sérül a bemeneti cső, vagy a gép rendszere

átereszti

átereszti a vizet, a vízbemenet leáll.

Acsőre

A csőre szerelt eláradás ellen védő biztonsági doboz

elekt

elekt víz alá helyezni. Ha bármilyen okból megsérül a doboz,

alá helyezni. Ha bármilyen okból megsérül a doboz,

víz válassza

válassza le a csatlakozót az elektromos hálózatról.

se přeruší přívod vody.

bezpečnostního ventilu namontovaného na hadici

obsahuje elektrické prvky a nesmí se proto

do vody. V případě jakéhokoli poškození tělesa

okamžitě vytáhněte zástrčku z elektrické zásuvky.

säkerhetssystem skyddar din lägenhet mot

Om den ingående slangen går sönder eller om

läcker vatten avbryts vattenintaget.

med översvämningsskyddet som är monterad på

innehåller elektriska komponenter.

är det förbjudet att placera lådan i fråga i vatten.

omedelbart ut stickkontakten ur eluttaget om lådan

av någon anledning.

system zabezpieczający przed zalaniem.

pralki, dopływ wody jest automatycznie

na wężu zawiera części elektryczne i nie

być zanurzane w wodzie. Jeśli z jakiegokolwiek

urządzenie zostanie uszkodzone, należy

odłączyć je od zasilania.

eláradás ellen védő biztonsági berendezés.

Ha sérül a bemeneti cső, vagy a gép rendszere a vizet, a vízbemenet leáll.

szerelt eláradás ellen védő biztonsági doboz

romos alkotórészeket tartalmaz. Emiatt tilos a dobozt

romos

alkotórészeket tartalmaz. Emiatt tilos a dobozt

le a csatlakozót az elektromos hálózatról.

proti vyplavení

mot översvämning

zabezpieczające przez zalaniem

Smeg DWAU147 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual