Smeg DI6SS-1 Instruction Manual

INSTRUCTION MANUAL

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS

Contents

1. Description of the controls ________________________________ 2

2. Operating instructions ___________________________________ 16

3. Cleaning and maintenance _______________________________ 31

4. Troubleshooting _______________________________________ 35

Thank you for choosing one of our products. You are advised to read this manual carefully; it contains all the information you need about the right conditions for the proper, safe use of your dishwasher. The individual sections are laid out to provide you with a step-by-step guide to all your appliance's functions; the texts are easy to understand and are complete with detailed illustrations. Recommendations are given for the correct use of the baskets, spray arms, containers, filters, washing programs, and for operating the controls. Following the cleaning instructions provided here will keep your dishwasher's performance at peak levels in the long term. This user-friendly manual will provide answers to all your questions about use of the dishwasher.

USER INSTRUCTIONS: these consist of recommendations for using the appliance, a description of its controls and of the correct cleaning and maintenance procedures.

1. Description of the controls

1.1 Upper panel

User instructions

All the dishwasher controls are grouped on the upper panel. Switch-on, programming, switch-off, etc. procedures are only possible when the door is open.

The panel shown is only a guideline example: the form of the lights and buttons may vary depending on the model.

ON/OFF BUTTON

Press this button to switch the dishwasher on/off.

SELECTED PROGRAM INDICATOR LIGHTS

Illumination of this light denotes the program selected and the

occurrence of a fault

(troubleshooting).

PROGRAM SELECTION BUTTON

+ ADJUSTING THE WATER SOFTENING SYSTEM



Used to select the washing program required and adjust the water softening system.

WATER HARDNESS ADJUSTMENT ON INDICATOR LIGHT

The light flashes to indicate that the appliance is in “water hardness adjustment” mode.

SALT WARNING LIGHT

If the symbol is present, illumination of this light denotes a regenerating salt warning level.

RINSE AID WARNING LIGHT

Illumination of this light denotes a rinse aid warning level in the tank.

User instructions

Err

PROGRAM DELAY BUTTON

Press this button to delay the start of the program.

INFORMATION DISPLAY (1 or 3 digits depending on model)

OPTIONS (on some models only)

CHILD SAFETY DEVICE (on some models only)

Information displayed

no Scheduled program

yes

duration

no Remaining program

yes

time

1 - 9 hours Delayed start 1 - 24 hours

Error message

<<OPTIONS(8)>>

Depending on the model, this zone may contain one or more of the following options, identified by the relative symbols and described in more detail in the relevant sections of the manual. It is not possible to select any options when the soak program is being used. All options except "Flexi Tabs" are disabled at the end of the wash cycle. To disable the “Flexi Tabs” option, press the relative button (the light goes out).

User instructions

Flexi Tabs

Option recommended for the use of multi-function tablet detergent.

HYCLEAN

Adds a final antibacterial rinse to the selected program.

Spread HALF LOAD WASH

Allows washing of just a few dishes placed in both baskets.

PROGRAM DELAY Allows the program to be set to start with a delay of 9, 12 or 24 hours depending on the model.

QUICK TIME OPTION

Select this option together with any washing program (except the soak program) to SHORTEN the cycle.

ENERSAVE Indicated option for save energy.

User instructions

PROGRAMS TABLE

SETTING THE WASHING PROGRAM AND SWITCHING ON

PROGRAM IN PROGRESS INDICATOR LIGHT

The manual contains the programs table for several models. To find the table for your dishwasher, compare the program symbols at the top of the table with those on your control panel.

After identifying the most suitable program with the aid of the programs table:

• Press the ON/OFF button (1) and wait for the PROGRAM INDICATOR LIGHT (2) to illuminate;

• Keep pressing the PROGRAM SELECTION button (3) until the indicator light corresponding to the desired program illuminates;

• select the option required (if any and if the model provides options);

• close the door; after about 2" the program will start LIGHT will

flashing (indicating that the program is being executed).

(on some models only)

When a program is running, a flashing light is projected onto the floor under the right-hand corner of the door. At the end of the program, the light goes out to reduce sleep mode electricity consumption.

PROGRAMS TABLE

User instructions

PROGRAM

PROGRESS

Wash at 38°C Rinse at 50°C

DURATION

MINUTES

(1)

Wash at 45°C Cold rinse Rinse at 70°C

Dry Wash at 45°C

Cold rinse Rinse at 55°C

Dry

When the "

recognises the type of dirt and automatically adjusts the

AUTO

" program is selected, the dishwasher

washing parameters as appropriate.

Hot prewash Wash at 70°C Cold rinse (2)

150

Rinse at 70°C Dry

CONSUMPTION

WATER LITRES

(3)

6,5 0,70

(3)

9,5 1,10

** **

(3)

15,5 1,70

PROGRAMME

NUMBER

& SYMBOL

1 RAPID 27’

2 GLASS

3 ECO (*)

EN 50242

AUTO 45-65

IEC/DIN***

5 SUPER

****

LOAD CROCKERY AND

CUTLERY

Dishes with light dirt,

washed immediately after

Glass, china and mixed

dishes with light dirt.

Dishes with normal dirt,

even with dried-on

residues

Pans and dishes with normal dirt, even with

dried-on residues.

Very dirty pans and

dishes, even with dried-on

residues.

use

IMPORTANT: see “NOTES AND REFERENCES” table on the following pages.

If the dishwasher door is open or not properly closed, the washing cycle will not start.

POWER kWh (1)

User instructions

QUICK TIME PROGRAMS

(see relevant section for explanation of functioning modes)

PROGRAMME

NUMBER E

SYMBOL

SOAK

DELICATE

QUICK

ECO

QUICK

NORMAL

QUICK

STRONG

and FAST

LOAD CROCKERY AND

Pans and dishes awaiting

completion of the load

Delicate dishes with normal

CUTLERY

dirt.

Dishes with normal dirt,

washed immediately after

use.

Dishes with normal dirt,

washed immediately after

use.

Mixed dishes with normal

dirt without dried-on

residues.

PROGRAM

PROGRESS

Cold prewash

Cold prewash Wash at 50°C Cold rinse Rinse at 70°C

Cold prewash Wash at 60°C Cold rinse Rinse at 70°C

Cold prewash Wash at 70°C Cold rinse Rinse at 70°C

Wash at 65°C Cold rinse Rinse at 70°C

DURATION

MINUTI

(1)

WATER LITRES

(3)

3,5 0,02

(3)

12,5 1,15

(3)

12,5 1,25

(3)

CONSUMPTION

13 1,40

10 1,20

IMPORTANT: see “NOTES AND REFERENCES” table on the following pages.

If the dishwasher door is open or not properly closed, the washing cycle will not start.

POWER kWh (1)

PROGRAMS TABLE

User instructions

PROGRAMME

NUMBER

& SYMBOL

1 RAPID 27’

AUTO 45-65

IEC/DIN***

3 ECO (*)

EN 50242

4 HALF LOAD

5 SUPER

****

LOAD CROCKERY AND

CUTLERY

Dishes with light dirt,

washed immediately after

Pans and dishes with normal dirt, even with

dried-on residues.

Dishes with normal dirt,

even with dried-on

residues

Half load of dishes with

normal dirt, washed

immediately after use.

Very dirty pans and

dishes, even with dried-on

residues.

use

PROGRAM

PROGRESS

Wash at 38°C Rinse at 50°C

When the "

recognises the type of dirt and automatically adjusts the

AUTO

" program is selected, the dishwasher

washing parameters as appropriate.

Wash at 45°C Cold rinse Rinse at 55°C Dry

Wash at 65°C Cold rinse Rinse at 70°C Dry

Hot prewash Wash at 70°C Cold rinse (2) Rinse at 70°C Dry

DURATION

MINUTES

(1)

(3)

150

(3)

15,5 1,70

CONSUMPTION

WATER LITRES

6,5 0,70

** **

11 1,20

IMPORTANT: see “NOTES AND REFERENCES” table on the following pages.

If the dishwasher door is open or not properly closed, the washing cycle will not start.

POWER kWh (1)

User instructions

QUICK TIME PROGRAMS

(see relevant section for explanation of functioning modes)

PROGRAMME

NUMBER E

SYMBOL

SOAK

DELICATE

QUICK

ECO

QUICK

NORMAL

QUICK

STRONG

and FAST

LOAD CROCKERY AND

Pans and dishes awaiting

completion of the load

Delicate dishes with normal

CUTLERY

dirt.

Dishes with normal dirt,

washed immediately after

use.

Dishes with normal dirt,

washed immediately after

use.

Mixed dishes with normal

dirt without dried-on

residues.

PROGRAM

PROGRESS

Cold prewash

Cold prewash Wash at 50°C Cold rinse Rinse at 70°C

Cold prewash Wash at 60°C Cold rinse Rinse at 70°C

Cold prewash Wash at 70°C Cold rinse Rinse at 70°C

Wash at 65°C Cold rinse Rinse at 70°C

DURATION

MINUTI

(1)

WATER LITRES

(3)

3,5 0,02

(3)

12,5 1,15

(3)

12,5 1,25

(3)

CONSUMPTION

13 1,40

10 1,20

IMPORTANT: see “NOTES AND REFERENCES” table on the following pages.

If the dishwasher door is open or not properly closed, the washing cycle will not start.

POWER kWh (1)

NOTES AND REFERENCES

Only

EN 50242

ENERSAVE

IEC/DIN

ENERSAVE

be enabled

20g

dispenser

10g

User instructions

run the soak program with half loads. Options cannot be used with the soak program. The ENERSAVE option cannot be used with soak, ultra clean, or any programs

which do not include the final drying stage.

Standard programme under

. The

option must

enabled.

** See information sheet provided

***

Reference program for laboratories: Detergent:

****

reference programme. The

option must

in the

the door or tablet. Configuration: see photo in “Using the baskets”.

(1) Program consumption and duration figures have been measured in

accordance with the EN 50242 standard. Values may vary depending on intake water and room temperatures and the type and quantity of dishes loaded.

(2) 1 or 2 cold rinses depending on the model.

REFERENCES for the ENERGY LABEL supplied with the dishwasher:

- Annual energy consumption is based on 280 standard wash cycles with cold water and consumption of low-energy operating modes. Actual consumption depends on the way in which the appliance is used.

- Water consumption is based on 280 standard wash cycles. Actual consumption depends on the way in which the appliance is used.

- Information refers to the EN 50242 STANDARD programme (identified in the programmes table), which is the most effective in terms of combined energy and water consumption. The programme is recommended for dishes with a normal level of dirt.

- Drying efficiency class on a scale from “G” (minimum efficiency) to “A” (maximum efficiency).

+ 27 hidden pages