Smeg CIR66XS User Manual

smeg 60cm gas cooktop

optional griddle plates

BB3679

ULTRA-RAPID TRIPLE BURNER

Conveniently and ergonomically positioned front-left, this versatile burner, while being designed for perfect wok cooking, also suits the larger stock pots, saucepans and griddles.

SIMMER CONTROL

All burners, including the ultra-rapid triple burner can be adjusted down to a very low, safe flame for the gentlest of low heat simmers.

AUXILIARY BURNER

Also ideally situated, this small multi-purpose burner is accessorised with a pot rest to accommodate even the smallest of utensils such as a coffee percolator or one-cup espresso maker.

Simply depress and turn the control knob of the desired cooking zone for flame ignition.

ELECTRONIC IGNITION

The cooktop is connected with a power cord of 1.3 metre length to be plugged into a GPO located according to installation needs below the benchline. This supplies a continuous stored charge to spark the gas supply to the individual burner of your choice. Simply depress and turn the control of the desired cooking zone for flame ignition.

ﬁnish satin stainless steel

size 500mmD x 585mmW x 45mmH

installation built-in one-piece hob, suits 60cm cabinet

capacity 31.6mj/hour max over four burners

• 1x ultra-rapid burner (wok) 15 mj/hr

• 2x semi-rapid burner 5.9 mj/hr

• 1x auxiliary burner 4.8 mj/hr

ignition automatic electronic

gas input set for natural gas — regulator supplied

adaptable for ULPG — no regulator required

safety ame failure device tted to each burner

accessories 2x cast-iron trivets, wok stand, pot rest

options cast-iron griddle plate —

luxury freestanding 46x24cm, code BB3679

warranty two years parts and labour

LOW MAINTENANCE

The seamless hob design allows for easy wipe-over cleaning. The control knobs are removable for cleaning access. Trivets, burner assemblies and wok stand can be washed in warm soapy water.

INSTALLATION

With only a 30mm displacement into the benchtop, the cooktop allows for easy installation underbench of either oven, cupboards or drawers.

FLAME FAILURE

A flame failure device, FFD, with rapid ignition is fitted to each burner. The FFD ensures that should a flame be extinguished accidentally — the gas supply to the specific burner(s) is stopped. For absolute safety, the burner(s) can only be reignited by physically resetting the control knob(s) to the OFF position and then following normal ignition procedure.

ID010310

Code CIR66XS

smeg 60cm gas cooktop

585

500

semi rapid

5.9 mj/hr each max

ultra-rapid triple flame 15 mj/hr max

auxiliary

4.8 mj/hr max

gas inlet ½” BSP fuel connections

190

NOTE: these drawings are not to scale — they are to assist only

CUTOUT

optional griddle plate

height 60mm includes trivets

width 585mm

depth 500mm

CUTOUT

height 30mm

width 555mm

depth 478mm

packaged dimensions 120x550x600mm

net weight 10kg

gross weight 11kg

maximum gas input rate

ignition 1.3 metre connected power cord

supplied clips, seal, instructions for installation,

31.6mj/hr

• ½” BSP gas inlet connection

• gas connection located righthand rear corner

• ½” BSP 1.0 kPa natural gas regulator is supplied with natural

gas hobs

• LPG adaptable, no regulator required

with 3-pin plug, suitable for standard 10 amp GPO

operation and maintenance

WARNING: technical speciﬁcations and product sizes can be varied by the manufacturer, without notice. Cutouts for appliances should only be by physical product measurements. The above information is indicative only.

ID010310

Code CIR66XS