Page 1
BST
Smeg undermount sinks
BST30
code BST30
net dimensions:
300mmW x 400mmD x 180mmH
inner radiused corners: 72mm
21.6 litre capacity
• supplied with luxury Lira designer waste reducers
• 90mm diameter waste holes, suit most food waste-
disposer installation
• 1mm gauge stainless steel
• non-magnetic 18/10 commercial grade stainless steel
(AISI 304)
• anti-drum insulation applied to underside of bowl
BST34
net dimensions:
340mmW x 400mmD x 180mmH
inner radiused corners: 72mm
24.5 litre capacity
code BST34
IMPORTANT NOTE
When undermounting the sink below stone, corian or
quartz resin benchtops, always have the actual sink at
hand when cutting out the bench to ensure accuracy.
BST45
code BST45
net dimensions:
450mmW x 400mmD x 180mmH
inner radiused corners: 72mm
32.5 litre capacity
optional accessories
TS30 chopping board, code 9239
320mmW x 420mmD x 20mmH
removable dish rack
220mmW x 165mmD x 90mmH
DB30 s/s crockery basket with removable
dish rack, code 9239
330mmW x 390mmD x 155mmH
WARNING: technical specifications and product sizes can be varied by the manufacturer, without notice.
Cutouts for appliances should only be by physical product measurements. The above information is
indicative only.
TS34 chopping board, code 9238
360mmW x 420mmD x 20mmH
DB34 s/s crockery basket with removable
dish rack, code 9238
330mmW x 390mmD x 155mmH
TS45 chopping board, code 9245
470mmW x 420mmD x 25mmH
DB45 s/s crockery basket with removable
dish rack, code 9245
435mmW x 265mmD x9 0mmH
ID090812
Page 2
BST
Smeg undermount sinks
BST30
BST45BST34
PLEASE NOTE: drawings are not to scale — they are to assist only
WARNING: technical specifications and product sizes can be varied by the manufacturer, without notice.
Cutouts for appliances should only be by physical product measurements. The above information is
indicative only.
ID210711
Loading...