Dryer
ASHT7EIT-1
User Manual
Asciugatrice
Manuale utente
2960311423_EN/261016.0908
Please read this user manual first!
Dear Customer,
Thank you for prefering a Smeg product. We hope that your product which has been manufactured with high quality
and technology will give you the best results. We advise you to read through this manual and the other accompanying
documentation carefully before using your product and keep it for future reference. If you transfer the product to
someone else, give its manual as well. Pay attention to all details and warnings specified in the user manual and
follow the instructions given therein.
Use this user manual for the model indicated on the cover page.
Read the instructions.
Explanation of symbols
Throughout this user manual the following symbols are used:
Important information or useful hints about usage.
C
Warning for hazardous situations with regard to life and property.
A
Warning against electric shock.
B
Warning against hot surfaces.
Warning against fire hazard.
Packaging materials of the product are manufactured from recyclable materials in accordance with our
National Environment Regulations.
Do not dispose of the packaging wastes with the domestic waste or other wastes, discard them to the dedicated
collection points designated by the local authorities.
2 / EN
Dryer / User Manual
1 Important instructions for safety and environment
This section contains safety instructions that will help protect from risk of
personal injury or property damage. Failure to follow these instructions shall
void any warranty.
1.1 General safety
• The dryer can be used by children at and above 8 years old and by
persons whose physical, sensory or mental capabilities were not fully
developed or who lack experience and knowledge provided that they
are supervised or trained on the safe usage of the product and the risks
it brings out. Children should not play with the product. Cleaning and
maintenance works should not be performed by children unless they are
supervised by someone.
• Children of less than 3 years should be kept away unless continously
supervised.
• Adjustable feet should not be removed. The gap between the dryer and
the floor should not be reduced with materials such as carpet, wood and
tape. This will cause problems with the dryer.
• Always have the installation and repairing procedures carried out by the
Authorized Service. Manufacturer shall not be held liable for damages
that may arise from procedures carried out by unauthorized persons.
• Never wash the dryer by spraying or pouring water onto it! There is the
risk of electric shock!
Dryer / User Manual
3 / EN
Important instructions for safety and environment
1.1.1 Electrical safety
Electrical safety instructions should be followed while electrical
A
A
• Connect the dryer to a grounded outlet protected by a fuse at the value
specified on the type label. Have the grounding installation performed by
a qualified electrician. Our company shall not be liable for any damages
that will arise when the dryer is used without grounding in accordance
with the local regulations.
• The voltage and allowed fuse protection is stated on the type label plate.
• The voltage specified on the type label must be equal to your mains
voltage.
• Unplug the dryer when it is not in use.
connection is made during the installation.
The appliance must not be supplied through an external switching
device, such as a timer,or connected to a circuit that is regularly
switched on and off by utility.
• Unplug the dryer from the mains during installation, maintenance,
cleaning and repair works.
• Do not touch the plug with wet hands! Never unplug by pulling on the
cable, always pull out by grabbing the plug.
• Do not use extension cords, multi-plugs or adaptors to connect the dryer
to power supply in order to decrease the risk of fire and electric shock.
• Power cable plug must be easily accessible after installation.
Damaged mains cable should be changed notifying the Authorized
B
B
4 / EN
Service.
If the dryer is faulty, it must not be operated unless it is repaired
by an authorized service agent! There is the risk of electric shock!
Dryer / User Manual
Important instructions for safety and environment
1.1.2 Product safety
Points to be taken into consideration for fire hazard:
Below specified laundry or items must not be dried
in the dryer considering fire hazard.
• Unwashed laundry items
• Items soiled with oil, acetone, alcohol, fuel oil, kerosene, stain
removers, turpentine, paraffin or paraffin removers must be
washed in hot water with plenty of detergent before being dried
in the dryer.
For this reason especially the items containing the above specified
stains must be washed very well, to do this use adequate
detergent and choose a high washing temperature.
Below specified laundry or items must not be dried in the
dryer due to the fire hazard:
• Garments or pillows bolstered with rubber foam (latex foam),
shower bonnets, water resistant textiles, materials with rubber
reinforcement and rubber foam pads.
• Clothing cleaned with industrial chemicals.
Items such as lighter, match, coins, metal parts, needle etc.
may damage the drum set or may lead to functional problems.
Therefore check all the laundry that you will load into your dryer.
Never stop your dryer before the programme completes. If you
must do this, remove all laundry quickly and lay them out to
dissipate the heat.
Clothes that are washed inadequately may ignite on their own and
even may ignite after drying ends.
• You must provide enough ventilation in order to prevent gases exiting
from devices operating with other types of fuels including the naked flame
from accumulating in the room due to the back fire effect.
Dryer / User Manual
5 / EN
Important instructions for safety and environment
Underwear that contains metal reinforcements should not be dried
A
C
C
• Never attempt to repair the dryer by yourself. Do not perform any repair
or replacement procedures on the product even if you know or have the
ability to perform the required procedure unless it is clearly suggested in
the operating instructions or the published service manual. Otherwise,
you will be putting your life and others’ lives in danger.
• There must not be a lockable, sliding or hinged door that may block
the opening of the loading door in the place where your dryer is to be
installed.
• Install your dryer at places suitable for home use. (Bathroom, closed
balcony, garage etc.)
• Make sure that pets do not enter the dryer. Check the inside of the dryer
before operating it.
• Do not lean on the loading door of your dryer when it is open, otherwise it
may fall over.
• The lint must not be allowed to accumulate around the tumble dryer
in the dryer. Dryer may be damaged if metal reinforcements come
loose and break off during drying.
Use softeners and similar products in accordance with the
instructions of their manufacturers.
Always clean the lint filter before or after each loading. Never
operate the dryer without the lint filter installed.
6 / EN
Dryer / User Manual
Important instructions for safety and environment
1.2 Mounting over a washing machine
• A fixing device should be used between the two machines when installing
the dryer above a washing machine. The fitting device must be installed
by the authorized service agent.
• Total weight of the washing machine and the dryer -with full load- when
they are placed on top of each other reaches to approx. 180 kilograms.
Place the products on a solid floor that has sufficient load carrying
capacity!
Washing machine cannot be placed on the dryer. Pay attention
A
Dryer Depth
to the above warnings during the installation on your washing
machine.
Installation Table for Washing Machine and Dryer
Washing Machine Depth
62 cm 60 cm 54 cm 50 cm 49 cm 45 cm 40 cm
54 cm
60 cm
Can be installed
Can be installed
Can be
installed
Cannot be
installed
Cannot be
installed
1.3 Intended use
• Dryer has been designed for domestic use. It is not suitable for
commercial use and it must not be used out of its intended use.
• Use the dryer only for drying laundry that are marked accordingly.
• The manufacturer waives any responsibility arisen from incorrect usage
or transportation.
• The service life of the dryer that you purchased is 10 years. During this
period, original spare parts will be available to operate the dryer properly.
Dryer / User Manual
7 / EN
Important instructions for safety and environment
1.4 Child safety
• Packaging materials are dangerous for the children. Keep packaging
materials away from children.
• Electrical products are dangerous for the children. Keep children away
from the product when it is operating. Do not let them tamper with the
dryer. Use the child-proof lock in order to prevent the children to tamper
with the dryer.
Child-proof lock is on the control panel. (See Child lock)
C
• Keep loading door closed even when the dryer is not in use.
1.5 Compliance with the WEEE regulation
and disposing of the waste product
This product complies with EU WEEE Directive (2012/19/EU). This
product bears a classification symbol for waste electrical and
electronic equipment (WEEE).
This product has been manufactured with high quality parts and
materials which can be reused and are suitable for recycling. Do
not dispose of the waste product with normal domestic and other wastes at
the end of its service life. Take it to the collection center for the recycling of
electrical and electronic equipment. Please consult your local authorities to
learn about these collection centers.
1.6 Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive
(2011/65/EU). It does not contain harmful and prohibited materials
specified in the Directive.
1.7 Package information
Packaging materials of the product are manufactured from recyclable
materials in accordance with our National Environment Regulations. Do
not dispose of the packaging materials together with the domestic or other
wastes. Take them to the packaging material collection points designated
by the local authorities.
Please visit the following website to get more information on the product.
http://www.smeg.com
8 / EN
Dryer / User Manual
Important instructions for safety and environment
1.8 Technical Specifications
EN
Height (Min. / Max.) 84,6 cm / 86,6 cm*
Width 59,5 cm
Depth 54 cm
Capacity (max.) 7 kg**
Net weight (plastic front door usage) 46,5 kg
Net weight (glass front door usage) 48,5 kg
Voltage
See type label***Rated power input
Model code
* Min. height: Height with adjustable feet are closed.
Max. height: Height with adjustable feet are opened maximum.
** Dry laundry weight before washing.
*** Type label is located behind the loading door.
Technical specifications of the dryer are subject to specification
C
C
C
without notice to improve the quality of the product.
Figures in this manual are schematic and may not match the
product exactly.
Values stated on markers on the dryer or in the other published
documentation accompanying with the dryer are obtained in
laboratory in accordance with the relevant standards. Depending on
operational and environmental conditions of the dryer, these values
may vary.
Dryer / User Manual
9 / EN
2 Your Dryer
2.1 Package Contents
1
1. Water drain hose *
2. Filter drawer spare sponge*
3. User Manual
4. Drying basket*
5. Drying basket user manual*
*It can be supplied with your machine depending on its model.
2 3
4
5
10 / EN
Dryer / User Manual
3 Installation
Before the calling the nearest Authorized Service for the
installation of the dryer, ensure that electrical installation
and water drain is appropriate referring to the user’s
manual. (See 3.3 Connecting to the drain and 3.5
Electrical connection) If they are not suitable, contact
a qualified electrician and technician to make necessary
arrangements.
Preparation of the dryer's location
C
A
A
3.1 Appropriate installation location
Install the dryer on a stable and level surface.
Dryer is heavy. Do not move it by yourself.
• Operate your dryer in a well ventilated, dust-free
• The gap between the dryer and the surface should
• Do not cover the ventilation grills of the dryer.
• There must not be a lockable, sliding or hinged
• Once the dryer is installed, it should stay at the
• Place the dryer at least 1 cm away from the edges
• Your dryer can be operated at temperatures
• The rear surface of the tumble dryer shall be
B
as well as the electrical and waste
water installations is under customer's
responsibility.
Prior to installation, visually check if the
dryer has any defects on it. If the drier
is damaged, do not have it installed.
Damaged products cause risks for your
safety.
Let your dryer wait for 12 hours before
starting to use it.
environment.
not be reduced by the materials such as carpet,
wood and tape.
door that may block the opening of the loading
door in the place where your dryer is to be
installed.
same place where its connections have been
made. When installing the dryer, make sure that
its rear wall does not touch anywhere (tap, socket,
etc.).
of other furniture.
between +5°C and +35°C. If the operating
conditions fall outside of this range, operation of
the dryer will be adversely affected and it can get
damaged.
placed against a wall.
Do not place the dryer on the power
cable.
3.2 Removing the transportation
safety assembly
Remove the transportation safety
A
• Open the loading door.
• There is a nylon bag inside the drum that contains
• Pull the nylon towards yourself and remove the
A
assembly before using the dryer for the
first time.
a piece of styrofoam. Hold it from its section
marked with XX XX.
transportation safety assembly.
Check that no part of the transportation
safety assembly remains inside the drum.
3.3 Connecting to the drain
In products equipped with condenser unit, water
accumulates in the water tank during the drying cycle.
You should drain accumulated water after each drying
cycle.
You can directly drain accumulated water through the
water drain hose supplied with the product instead of
periodically draining the water collected in the water
tank.
Connecting the water drain hose
1-2 Pull hose at the behind of the dryer by hand in order
to disconnect it from where it is connected. Do not
use any tools to remove the hose.
3 Connect one end of the drain hose supplied with
the dryer to the connection point from where you
removed the hose of the product in previous step.
4 Connect the other end of the drain hose directly to
the wastewater drain or to the washbasin.
Dryer / User Manual
11 / EN
Installation
1
3 4
A
C
C
Hose connection should be made in a safe
manner. Your drain house will be flooded if
the hose comes out of its housing during
water discharge.
Water drain hose should be attached to a
height of maximum 80 cm.
Make sure that the water drain hose is not
stepped on and it is not folded between
the drain and the machine.
2
3.4 Adjusting the feet
• In order to ensure that the dryer operates more
silently and vibration-free, it must stand level and
balanced on its feet. Balance the machine by
adjusting the feet.
• Turn the feet to left or right until the dryer stands
level and firmly.
We recommend carrying the dryer in
upright position. If it is not possible to
A
carry the machine in the upright position,
we recommend carrying it by tilting
towards the right side when looked from
the front.
3.7 Warnings about sounds
It is normal to hear a metallic noise
C
C
from the compressor sometimes during
operation.
Water collected during operation is
pumped to water tank. It is normal to hear
pumping noise during this process.
Never unscrew the adjustable feet from
C
their housings.
3.5 Electrical connection
For specific instructions for electrical connection
required during installation (see 1.1.1 Electrical
Safety)
3.6 Transportation of the dryer
Unplug the dryer before transporting it.
Drain all water that has remained in the dryer.
If direct water drain connection is made, then remove
the hose connections.
12 / EN
3.8 Changing the illumination lamp
In case an illumination lamp is used in your laundry
dryer.To change the Bulb/LED used for illumination of
your tumble dryer, call your Authorized Service.
The lamp(s) used in this appliance is not suitable for
household room illumination. The intended purpose of
this lamp is to assist the user to place laundry in the
tumble dryer in a comfortable way. The lamps used
in this appliance have to withstand extreme physical
conditions such as vibrations and temperatures above
50 °C
Dryer / User Manual
4 Preparation
4.1 Laundry suitable for drying in the dryer
Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are
suitable for drying in a dryer and make sure that you select the appropriate programme.
LAUNDRY DRYING SYMBOLS
Drying
Symbols
Drying
Settings
Iron -
Dry or Steam
IRON
Maximum temperature
Suitable for
dryer
At any temperature
No Iron
At high temperature
At medium
temperature
Iron at high
temperature
200 0C 150 0C 110 0C
4.2 Laundry not suitable for drying in
the dryer
Delicate embroidered fabrics, woollen, silk
garments, delicate and valuable fabrics,
C
airtight items and tulle curtains are not
suitable for machine drying.
4.3 Preparing laundry for drying
• Laundry may be tangled with each other after
washing. Separate the laundry items before
placing them into the dryer.
• Dry garments having metal accessories such as
zippers, inside out.
• Fasten the zippers, hooks and buckles and button
sheets.
Sensitive /
Delicate dry
At low temperature
Iron at medium
temperature
Without heating
Do not dry
with dryer
Hang to dry
Iron at low
temperature
Lay to dry
Do not dry
Hang wet to dry
Do not iron
4.4 Things to be done for energy
saving
Following information will help you use the dryer in an
ecological and energy-efficient manner.
• Spin your laundry at the highest speed possible
when washing them. Thus, the drying time is
shortened and energy consumption is reduced.
• Sort out the laundry depending on their type and
thickness. Dry the same type of laundry together.
For example thin kitchen towels and tableclothes
dries earlier than thick bathroom towels.
• Follow the instructions in the user manual for
programme selection.
• Do not open the loading door of the machine
during drying unless necessary. If you must open
the loading door, do not keep it open for a long
time.
• Do not add wet laundry while the dryer is in
operation
• Clean the lint filter before or after each drying
cycle. (See 6.1 Cleaning Lint Filter / Loading
Door Inner Surface)
Lay in shadow
Do not dry-
clean
to dry
Dry-cleanable
steam
Iron without
Dryer / User Manual
13 / EN
Preparation
• Clean the filter periodically when there is visible
air collection on it or when the symbol lights up, if
there is a filter drawer cleaning warning symbol «
» available. (See 6. 4 Cleaning the filter
drawer)
• Ventilate the room, where the dryer is located, well
during drying.
4.5 Correct load capacity
Follow the instructions in the “Programme selection and
consumption table”. Do not load more than the capacity
values stated in the table.
It is not recommended to load the dryer
with laundry exceeding the level indicated
C
in the figure. Drying performance will
degrade when the machine is overloaded.
Furthermore, dryer and the laundry can get
damaged.
Following weights are given as examples.
Laundry
Cotton quilt covers (double) 1500
Cotton quilt covers (single) 1000
Bed sheets (double) 500
Bed sheets (single) 350
Large tablecloths 700
Small tablecloths 250
Tea napkins 100
Bath towels 700
Hand towels 350
Blouses 150
Cotton shirts 300
Shirts 250
Cotton dresses 500
Dresses 350
Jeans 700
Handkerchiefs (10 pieces) 100
T-Shirts 125
*Dry laundry weight before washing.
Approximate weights
(g)*
14 / EN
Dryer / User Manual
5 Operating the product
5.1 Control panel
1 2
1. Program selection knob
2. Remaining duration indicator
3. On/Off button
4. Start/pause button
5. End duration button
6. Sound warning button
3
456
5.2 Screen symbols
Tank
full
Dryer / User Manual
Filter
cleaning
Buzzer/
cancel
Audible
warning
Anti
Creasing
Child-proof
lock
15 / EN
Operating the product
5.3 Preparing the machine
1. Plug in the machine
2. Place laundry inside the machine.
3. Press the On/Off button.
4. When your machine turns on for the first time,
it turns on with the declaration (cotton cabinet
dryness) program.
Pressing the On/Off button doesn‘t mean
C
the program starts.
Press the Start / Pause button to start the
program.
5.4 Program selection
1. Determine the appropriate program from the chart
below containing the drying levels.
2. Select the program you desire using the Program
Selection knob.
Only cotton laundry is dried in
normal temperature.
Extra Dry
Cupboard dry
Cupboard
dry +
Iron Dry
C
Thick and multi-layered laundry
(towels, sheets, jeans etc.) are dried
so that they can be placed into
wardrobe without ironing.
Normal laundry (tablecloths,
underwear etc.) are dried so that
they can be placed into wardrobe
without ironing.
Normal laundry (Ex: tablecloths,
underwear) are again dried so
that they can be placed into the
wardrobe but more so than the
wardrobe dryness option.
Normal laundry (shirts, dresses etc)
are dried ready for ironing.
For detailed program information see.
„Program selection and consumption
table“..
5.5 Main programs
The main programs are given below based on fabric
type.
• Cotton
Dry durable laundry with this program. It dries in normal
temperature. Recommended for use with your cotton
laundry (sheets, bed covers, towels, bathrobes etc.)
• Synthetic
Dry laundry that is not very durable with this program.
Recommended for use with your synthetic laundry.
5.6 Extra programs
The following extra programs are available in the
machine for special conditions.
Extra programs may vary according to the
C
C
• Jeans
Use to dry jeans that are wringed with high rpm in
washing machine.
• Sport
Use to dry laundry made from synthetic, cotton or mixed
fabrics.
• Express
You can use this program to dry cotton laundry that you
had wringed in high rpm in your washing machine. It
dries 1 kg of your Cotton laundry (3 shirts / 3 T-shirts) in
50 minutes.
• Daily
Program for daily drying of cotton and synthetic laundry
and lasts 110 minutes.
• Shirts
Dries shirts more delicately and thus causes less
wrinkles for easy ironing.
• BabyProtect
Program used for baby clothing with can be dried
approval on the label.
C
specifications of your machine.
In order to receive better results from
drying machine programs, your laundry
should be washed with the appropriate
program in your washing machine and
wringed with recommended wringing
revolution..
Very little dampness might remain
on the shirts after the program. It is
recommended that you do not leave the
shirts in the drying machine.
16 / EN
Dryer / User Manual
Operating the product
• Delicates
You can dry your delicates suitable for drying or laundry
that is recommended to hand wash (silk blouses, thin
underwear etc.) in low temperature.
It is recommended to dry your delicates
C
• Freshen up
It only performs ventilation for 10 minutes without
blowing hot air. You can ventilate the cotton and linen
clothing that has remained closed for a long duration
and remove their odor.
• Time programs
You can select the 30 mins and 45 mins time programs
to achieve the desired final drying level with low
temperature.
C
in laundry bag to prevent wrinkles and
damage. When the program ends,
take your laundry out of the machine
immediately and hang them to prevent
wrinkles.
On this program, the machine dries as
long as the set duration, regardless of the
drying level.
Dryer / User Manual
17 / EN
Operating the product
5.7 Program selection and consumption table
EN
Programs Capacity (kg)
Cottons / Coloreds
Extra dry 7 1000 % 60 185
A
Cupboard dry 7 / 3,5 1000 % 60 174 / 107
A
Iron dry 7 1000 % 60 140
A
Shirts 1,5 1200 % 60 60
Jeans 4 1200 %50 150
Daily 4 1200 %50 110
Sport 4 1000 %60 135
Express 1 1200 %50 50
Delicates 2 600 %40 70
Baby 3 1000 % 60 80
Synthetics
Cupboard dry 3,5 800 % 40 70
B
Iron dry 3,5 800 % 40 60
B
Energy consumption values
Programs Capacity (kg)
Cottons linen Ready to wear* 7 / 3,5 1000 % 60 1,8 / 1,2
Cottons Ready to iron
Synthetics Ready to wear 3,5 800 % 40 0,7
Power consumption of the off-mode for the standart cotton programme at full load, PO (W) 0,5
Power consumption of the left-on mode for the standart cotton programme at full load, PL (W) 1,0
Contains fluorinated greenhouse gases covered by the Kyoto Protocol. Hermetically sealed.
R134a / 0,30 kg - GWP:1430 - 0,429 tCO2e
7 1000 % 60 1,55
Spin speed in washing
machine (rpm)
Spin speed in washing
machine (rpm)
Approximate amount
of remaining humidity
Approximate amount
of remaining humidity
Drying time (minutes)
Energy consumption
value kWh
„Cotton cupboard dry programme“ used at full and partial load is the standard drying programme
to which the information in the label and the fiche relates, that this programme is suitable for drying
normal wet cotton laundry and that it is the most efficient programme in terms of energy consumption
for cotton.
* : Energy Label standard program (EN 61121:2012) All the filters must be cleaned prior to test series.
All the values in the table are determined according to EN 61121:2012 standard. Consumption values may vary from
the values in the table depending on laundry type, wringing revolution, ambient conditions and changes in voltage.
18 / EN
Dryer / User Manual
Operating the product
5.8 Auxiliary functions
Sound warning cancel
Drying machine makes sound warnings when the
program is completed. If you don’t want sound
notifications, press the “Sound Notification” button.
When you press the sound notification button it lights
up, and program does not make sound notifications
when completed.
You can select this function before or after
C
the program starts.
5.9 Warning symbols
Warning symbols may vary according to
C
Fiber filter cleaning
When the program is completed, a warning led lights
up, which indicates that the filter has to be cleaned.
C
Water tank
When the program is completed, a warning led lights
up, which indicates that the water tank must be
emptied.
If the water tank fills up while the program is running,
warning led starts blinking and the machine goes into
stand-by. In that case empty the water in the water tank
and start the program by pressing the Start / Pause
button. Warning led turns off and the program resumes.
the specifications of your machine.
If the filter cleaning led blinks, see the
„Troubleshooting“ chapter.
5.10 End duration
You can delay the end duration of the program for up to
24 hours with the end duration function.
1. Open the loading door and place your laundry.
2. Select the drying program.
3. Press the end duration selection button and set the
delay duration you want.
End duration led lights up. (End duration moves
continuously when you keep pressing the button).
4. Press the Start / Pause button. End duration
countdown begins. The “:” sign in the middle of
the displayed delay duration blinks.
You can add or remove laundry for the
C
Changing the end duration
If you want to change the duration during the
countdown:
1. Cancel the program by pressing the On/Off button.
2. Select the program you desire using the Program
3. Repeat the end duration operation for the duration
4. Start the program by pressing the Start / Pause
Canceling the end duration function
If you want to cancel the end duration setting
countdown and start the program right away:
1. Cancel the program by pressing the On/Off button.
2. Select the program you desire using the Program
3. Start the program by pressing the Start / Pause
duration of the end duration. The duration
displayed on the screen is the sum of
the normal drying duration and the end
duration. At the end of the countdown the
end duration led turns off, drying beings
and drying led lights up.
Turn on the drying machine again by pressing the
On/Off button. When your drying machine turns on
for the first time, it turns on with the declaration
(cotton wardrobe dryness) program.
Selection knob.
you want.
button.
Turn on the drying machine again by pressing the
On/Off button. When your drying machine turns on
for the first time, it turns on with the declaration
(cotton wardrobe dryness) program.
Selection knob.
button.
Loading door open
Start/Pause led blinks when the loading door of the
drying machine is open.
Dryer / User Manual
19 / EN
Operating the product
5.11 Starting the program
Start the program by pressing the Start / Pause button.
Start/Pause led and the Drying led light up, indicating
the program started. The “:” sign in the middle of the
remaining duration starts to blink.
5.12 Child Lock
The machine features a child lock which prevents
the machine program flow from being affected when
buttons are pressed during operation.
When the Child Lock is active, all buttons except for the
On/Off button are deactivated.
To activate the child lock, press the Sound Notification
button and End Duration button simultaneously for 3
seconds.
Te child lock should be deactivated to be able to start
a new program after the current program ends or to
be able to interfere with the current program. Keep the
same buttons pressed for 3 seconds again to deactivate
the child lock.
The lock led on the screen lights up when
C
C
A warning sound is heard when any button is pressed
(except for On/Off button) or the Program Selection knob
is turned while the child lock is active.
the Child Lock is activated.
Child Lock deactivates when the machine
is turned off and on again using the On/
Off button.
5.13 Changing the program after it is
started
After the machine starts running, you can change
the program you selected to dry your laundry with a
different program.
1. For example, to select Extra Dry program instead
of the Iron Dryness, stop the program by pressing
the Start / Pause button.
2. Turn the Program Selection knob to select the
Extra Dry program.
3. Start the program by pressing the Start / Pause
button.
Adding and removing laundry in stand-by mode
If you want to add or remove laundry after the drying
program starts:
1. Press the Start/Pause button to take the machine
into Stand-by mode. Drying operation stops.
2. Open the loading door, add or remove laundry and
close the loading door.
3. Start the program by pressing the Start / Pause
button.
The laundry adding made after the drying
C
C
C
operation started may cause the dried
laundry inside the machine to mix with
the wet laundry and the laundry to remain
damp after the operation ends..
Laundry adding and removing can be
repeated as much as desired during drying
operation.
But this process would continuously
interrupt the drying operation, and so
would cause the program duration
to lengthen and increase energy
consumption. Thus, it is recommended to
add laundry before the program starts.
If a new program is selected by changing
the position of the program selection knob
while your machine is in stand-by mode,
the running program ends.
Do not contact the inner surface of the
drum when adding or removing laundry
during a continuing program. The drum
surface is hot.
20 / EN
5.14 Canceling the program
If you want to cancel the program and end the drying
Dryer / User Manual
Operating the product
operation for any reason after the machine starts
running, press the On/Off button.
As it will be extremely hot inside the
A
5.15 Program end
When the program ends, the Final/Wrinkle Prevention,
Fiber Filter Cleaning and Water Tank Warning leds on the
program follow up indicator light up. Loading door can
be opened and machine becomes ready for a second
run.
Press the On/Off button to turn off the machine.
C
C
C
machine when you cancel the program
while the machine is in operation; run the
ventilation program to cool it down.
In case the laundry is not removed after
the program is completed, the wrinkle
prevention program that lasts 2 hours start
in order to prevent wrinkling of the laundry
that remains inside the machine.
Clean the fiber filter after each drying.
(See. „Fiber filter and loading door inner
surface“)
Empty the water tank after each drying.
(See. „Emptying the water tank“)
Dryer / User Manual
21 / EN
6 Maintenance and cleaning
Service life of the product extends and frequently
experienced problems will be reduced if it is cleaned at
regular intervals.
6.1 Cleaning Lint Filter / Loading Door
Inner Surface
Lint and fibre released from the laundry to the air during
the drying cycle are collected in the Lint Filter.
Such fibre and lint are generally formed
C
A
C
To clean the lint filter:
• Open the loading door.
• Remove the lint filter by pulling it up and open the
• Clean lint, fibre, and cotton thread by hand or with
• Close the lint filter and place it back into its
during wearing and washing.
Always clean the lint filter and the inner
surfaces of the loading door after each
drying process.
You can clean the lint filter housing with a
vacuum cleaner.
lint filter.
a soft piece of cloth.
housing.
• A layer can build up on the filter pores that can
cause clogging of the filter after using the dryer
for a while. Wash the lint filter with warm water
to remove the layer that builds up on the lint
filter surface. Dry the lint filter completely before
reinstalling it.
• Clean the entire inner surface of the loading door
and loading door gasket with a soft damp cloth.
22 / EN
Dryer / User Manual
Maintenance and cleaning
6.2 Cleaning the sensor
There are dampness sensors in the dryer that detect
whether the laundry is dry or not.
To clean the sensors:
• Open the loading door of the dryer.
• Allow the machine to cool down if it is still hot due
to the drying process.
• Wipe the metal surfaces of the sensor with a soft
cloth, dampened with vinegar and dry them.
Clean metal surfaces of the sensors 4
C
C
A
times a year.
Do not use metal tools when cleaning
metal surfaces of the sensors.
Never use solvents, cleaning agents or
similar substances for cleaning due to the
risk of fire and explosion!
6.3 Draining the water tank
Dampness of the laundry is removed and condensed
during drying process and the water that arise
accumulates in the water tank. Drain the water tank
after each drying cycle.
Condensed water is not drinkable!
A
Never remove the water tank when the
A
If you forget to drain the water tank, the machine will
stop during the subsequent drying cycles when the
water tank is full and the Water Tank warning symbol
will flash. If this is the case, drain the water tank and
press Start / Pause button to resume the drying cycle.
To drain the water tank:
Pull the drawer and remove the water tank carefully.
program is running!
Dryer / User Manual
• Drain the water in the tank.
• If there is lint accumulation in the funnel of the
water tank, clean it under running water.
• Place the water tank into its seat.
If the direct water draining is used as
C
an option, there is no need to empty the
water tank.
23 / EN
Maintenance and cleaning
6.4 Cleaning the filter drawer
Lint and fiber that could not be captured by the lint
filter are blocked in the filter drawer behind the kick
plate. Filter Drawer Cleaning warning light will light up
maximum at every 5 drying cycles as a reminder.
There is a two-level filter in the filter drawer. Te first level
is the filter drawer sponge and the second level is the
filter cloth.
To clean the filter drawer:
• Press the kick plate button to open the kick plate.
• Remove the filter drawer cover by turning it in the
direction of arrow.
• Open the filter drawer by pressing the red button.
• Take out the filter drawer sponge.
• Clean lint, fiber, and cotton thread on the filter cloth
by hand or with a soft piece of cloth.
• When you notice a layer that may lead to clogging
on the filter cloth, please clean the layer by
washing in warm water. Let the filter cloth dry
thoroughly before installing back the filter drawer.
• Pull out the filter drawer.
24 / EN
• Wash the filter drawer sponge by hand to remove
the fiber and lint on the surface. After washing the
sponge, squeeze it by hand and remove the excess
water. Well-dry the sponge before storing it.
It is not necessary to clean the sponge
if lint and fiber accumulation on it is not
C
significant.
Dryer / User Manual
Maintenance and cleaning
• Place the sponge back into its place.
• Close the filter drawer as to lock the red button.
• Place the filter drawer back into its place, turn the
filter drawer cover in the arrow direction and close
it securely.
6.5 Cleaning the evaporator
Clean the lint accumulated on the fins of the evaporator
located behind the filter drawer with a vacuum cleaner.
You can also clean by hand provided that
you wear protective gloves. Do not attempt
A
to clean with bare hands. Evaporator fins
can harm your hand.
• Close the kick plate cover.
Drying without the filter drawer sponge in
A
C
place will damage the machine!
A dirty lint filter and filter drawer will cause
longer drying periods and higher energy
consumption.
Dryer / User Manual
25 / EN
7 Troubleshooting
Drying process takes too much time.
• Pores of the lint filter are clogged. >>> Wash the lint filter with warm water.
• Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.
• Ventilation grids on the front side of the machine are blocked. >>> Remove the objects (if any)
that block ventilation in front of the ventilation grids.
• Ventilation is not sufficient since the room where the machine is installed is very small. >>> Open the
door and window of the room to avoid the room temperature increase too much.
• Lime deposit has built up on the dampness sensor. >>> Clean the dampness sensor.
• Excessive laundry is loaded. >>> Do not load the dryer in excess.
• Laundry is not spun sufficiently. >>> Spin your laundry at a higher speed in your washing
machine.
Laundry comes out wet at the end of drying.
C
After drying, the hot clothes feel damper than their actual dampness level.
• It is likely that the selected programme did not suit the laundry type.>>>Checking the care labels on
clothes, select appropriate programme for the laundry type or use timer programmes in
addition.
• Pores of the lint filter are clogged. >>> Wash the lint filter with warm water.
• Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.
• Excessive laundry is loaded. >>> Do not load the dryer in excess.
• Laundry is not spun sufficiently. >>> Spin your laundry at a higher speed in your washing
machine.
Dryer does not switch on or the programme does not start. Dryer does not start when it is set.
• It is not plugged in. >>> Make sure that the machine is plugged in.
• The loading door is ajar. >>> Make sure that the loading door is closed securely.
• Programme is not selected or the Start / Pause / Cancel button is not pressed. >>> Make sure that the
programme is selected and the machine is not in Pause mode.
• Childproof Lock is activated. >>> Deactivate the Childproof Lock.
Programme is interrupted without any cause.
• Loading door is ajar. >>> Make sure that the loading door is closed securely.
• There was a power failure. >>> Press Start / Pause / Cancel button to start the programme.
• Water tank is full. >>> Drain the water tank.
Laundry has shrunk, become felted or deteriorated.
• A programme suitable for the laundry type is not used. >>> Check the garment tag and select a
programme suitable for the fabric type.
Drum lighting does not turn on. (On models with lamp)
• Dryer is not switched on with the On / Off button. >>> Make sure that the dryer is switched on.
• Lamp is defective. >>> Call Authorized Service Agent to have the lamp replaced.
End/Anti-creasing symbol is on.
• Anti-creasing programme is activated in order to prevent laundry that has remained in the machine from
creasing. >>> Turn off the dryer and take out the laundry.
End symbol is on.
• Programme is over. Turn off the dryer and take out the laundry.
26 / EN
Dryer / User Manual
Troubleshooting
Lint Filter Cleaning symbol is on.
• Lint filter is not cleaned. >>> Clean the lint filter.
Lint Filter Cleaning symbol is flashing.
• Filter housing is clogged with lints. >>> Clean the lint filter housing.
• A deposit has built up on the lint filter pores that may cause clogging. >>> Wash the lint filter with
warm water.
• Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.
Water leaks from the loading door
• Lint has accumulated on the inner surfaces of the loading door and on the surfaces of the loading door
gasket. >>> Clean the inner surfaces of the loading door and the surfaces of the loading
door gasket.
Loading door opens spontaneously.
• Loading door is ajar. >>> Push the loading door to close until you hear a locking sound.
Water Tank warning symbol is on/flashing.
• Water tank is full. >>> Drain the water tank.
• Water draining hose is bent. >>> If the product is connected directly to a wastewater drain, check the water
drain hose.
Filter Drawer Cleaning warning symbol is flashing.
• Filter drawer is not cleaned. >>> Clean the sponge and the filter cloth in the filter drawer.
If you cannot eliminate the problem although you follow the instructions in this section, consult your
A
dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.
Dryer / User Manual
27 / EN
PRODUCT FICHE
Complying Commission Delegated Regulation (EU) No 392/2012
Supplier name or trademark
Model name
Rated capacity (kg)
Type of Tumble Dryer
Energy efficiency class
Annual Energy Consumption (kWh)
(1)
Type of Control
(2)
Air Vented
Condenser
Automatic
Non-automatic
Energy consumption of the standard cotton programme at full load (kWh)
Energy consumption of the standard cotton programme at partial load (kWh)
Power consumption of the off-mode for the standart cotton programme at full load, P
Power consumption of the left-on mode for the standart cotton programme at full load, P
(W)
O
(W)
L
The duration of the left on mode (min)
Standard cotton programme
Programme time of the standard cotton programme at full load, T
Programme time of the standard
Weighted programme time of the standard cotton programme at full and partial load (T
Condensation efficiency class
Average condensation efficiency of the standard cotton programme at full load, C
Average condensation efficiency of the standard cotton programme at partial load, C
Weighted condensation efficiency of the standard cotton programme at full load and partial load, C
Sound power level for the standard cotton programme at full load
(3)
cotton programme at partial load, T
(4)
(min)
dry
(min)
dry1/2
)
t
dry
dry1/2
t
(5)
Built-in
: Yes - : No
(1) Scale from A+++ (most efficient) to D (least efficient)
(2) Energy consumption based on 160 drying cycles of the standard cotton programme at full and partial load, and the consumption of
the low-power modes. Actual energy consumption per cycle will depend on how the appliance is used.
(3) "Cotton cupboard dry programme" used at full and partial load is the standard drying programme to which the information in the
label and the fiche relates, that this programme is suitable for drying normal wet cotton laundry and that it is the most efficient
programme in terms of energy consumption for cotton
(4) Scale from G (lest efficient) to A (most efficient)
(5) Weighted average value — L
expressed in dB(A) re 1 pW
WA
Smeg
ASHT7EIT-1
7
-
A+
237
-
1,80
1,20
0,5
1,0
30
174
107
136
B
86%
86%
86%
65
-
Loading...