Thank you for your trust and for buying our tumble drier. We congratulate you on your wise
decision.
This appliance is designed for drying clothes for home use only.
The dryer enables quick drying of your laundry, leaving it soft and tender without affecting its
shape.
Our appliances are environmentally friendly: some of the materials are recyclable while others are
disposed of and destroyed. To protect the environment, dispose of your appliance by delivering it to
the authorized dealer.
The appliance is intended exclusively for use in households. If the appliance is used for
professional purposes, for profi t, or for purposes beyond regular use in a household, or if appliance
is used by a person who is not a consumer, the warranty period equals the shortest warranty period
possible as stipulated by the relevant legislation.
Weight (net): evacuation dryer 33 kg, condensation dryer 40 kg
Nominal voltage: 230 V, 50 Hz
Connecting power: 2300 / 2500 / 2800 W
Max. load: 6 kg / 7 kg
Connection: power cord (230 V, 50 Hz, min 10 A / 16 A)
Fuse: 10 A / 16 A (depending on model)
Heater: 2000 / 2300 / 2500 W (depending on model)
Name plate with technical information for the appliance is located
under the door frame.
3
129530
Warnings
In case of condenser dryer it is not recommended to reduce temperature or switch
off the heater, as the drying time is thus extended because of poor condensation of
evaporated water.
• Use the dryer to dry only the laundry washed with water. Do not attempt to dry the laundry,
washed or cleaned with fl ammable detergents or solutions (gasoline, trichloroethylene etc.), as it
may cause explosion.
• Do not let the children play with the appliance. Prevent your children or pets to enter the dryer
drum.
• When discarding the old appliance remove the power cord and breka the lock, so that the door
can not be locked (safety precautions for children).
• After cleaning replace the condenser to the air channel. Operating the appliance without the
condenser or with a damaged condenser may cause fi re.
• Rear wall of the appliance may be hot (for condenser drier only) - danger of burns.
• Clean fi lter after each drying. If you pulled the fi lter out, always reinsert it before the next drying
operation.
• After use always turn the appliance off (the program selection jog should be in position “0”) and
unplug the power cord.
• Close the dryer door prior pulling out the water container.
• Leave all repairs to a qualifi ed technician. Tampering with the appliance or reparations by an
unqualifi ed person may cause accidents or failures. Call the authorized service department (see
list of authorized service departments).
• Name plate with technical information about the appliance is located under the door frame.
• The room must be well aired, surrounding air must not contain dusty particles.
• Room where the appliance is located must be well aired to prevent back fl ow of gasses, released
by open fi re gas appliances (fi replace).
• The warranty shall not apply to consumables (bulbs), minor discoloration or deviations of color,
increased noise level as a consequence of appliance age, which does not affect appliance
functionality, and aesthetical defi ciencies which do not affect appliance functionality or safety.
To reduce the fi re hazard, always consider the following:
• Do not dry unwashed items in the tumble dryer.
• Items that have been soiled with substances as cooking oil, acetone, alcohol, petrol, kerosene,
spot removers, turpentine, waxes and wax removers should be washed in hot water with an
extra amount of detergent before being dried in the tumble dryer.
• Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles
and clothes or pillows fi tted with foam rubber pads should not be dried in the tumble dryer.
• Fabric softeners, or similar products, should be used as specifi ed by the fabric softener
instructions.
• The fi nal part of a tumble dryer cycle occurs without heat (cool down cycle) to ensure that the
items are left at a temperature that ensures that the items will not be damaged.
Before connecting the appliance read these instructions carefully. Repairing the failure
129530
arising from inappropriate connections or use of the appliance is not covered by the
guarantee.
4
The belt can be replaced by a servising engineer only, who incorporates an original
spare part with the marking OPTIBELT EPH 1906, code 104265, OPTIBELT 8 EPH 1941,
code 160165 (depending on model).
The symbol on the product or on its packaging indicates that this product may not
be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of thisproduct. For more
detailed information about recycling of this product, please contact your local city
offi ce, your household waste disposal service or the shop where you purchased the
product.
Never stop a tumble dryer before the end of the drying cycle unless all items are
quickly removed and spread out so that the heat is dissipated.
Installation and connection
Removing wrappingRemoving wrapping
Selecting the appropriate
Selecting the appropriate
location of the appliance
location of the appliance
• Packaging materials are environmentally friendly: they can
either be recycled, safely disposed of or destroyed without any
threat to the environment.
• To be able to do this effectively all materials are marked
accordingly.
Be careful not to damage cabinet of the appliance with
a sharp object when removing the packaging.
Before connecting the appliance, let it warm up to room
temperature (wait for two hours).
Ventilation slots and openings on the appliance front and rear
wall should not be obstructed.
A - Evacuation dryer
• Place the appliance in a well ventilated room with a window or
a built-in fan.
• Connect the evacuation tube to the pre-prepared opening.
• Evacuation must not be connected to air duct used as
a chimney for exhaust gasses of appliances using other
combustion material.
B - Condenser dryer
• Do not place the appliance in a room where there is danger of
freezing.
• Location should be adequately ventilated. Room temperature
should always be between 0°C and 25°C since frozen water
in the condensation water receptacle or in the pump may
damage the dryer.
129530
5
InstallationInstallation
• Appliance can either stand on its own or can be placed on
top of a washing machine of the same dimensions - minimum
width 517 mm, depth 476 mm. The surface for placing the
dryer must be clean and fl at. Use supplied vacuum feet to
prevent sliding of the appliance. Washing machine hardtop
must be wooden or metallic. To conceal the opening between
the two appliances, decorative plate is available on request
against payment.
Do not place the appliance behind lockable door,
sliding door, and door with hinges on the opposite side
of the appliance.
Place the appliance in the room in such way to ensure
free opening of the drier door.
• Level the machine longitudinally and transversally by rotating
the adjustable feet, thus enabling the leveling by +/- 1 cm.
Vibrations, moving of the appliance and loud operation
due to incorrect setting of the adjustable feet shall not
be covered by this warranty.
The appliance should be placed on a surface with
concrete base; the surface should be dry and clean in
order to prevent slipping. The adjustable feet should
also be cleaned before installation.
Do not place the dryer on a thick carpet since this
could obstruct the air circulation.
Moist air outlet
Moist air outlet
1 Lid
1 Lid
2 Evacuation tube
2 Evacuation tube
129530
6
A - Evacuation dryer
• There are two openings for venting out humid air. One of them
should be closed with the supplied lid, while the other should
be connected to the evacuation tube.
The distance between the dryer and the moist air outlet
(vent shaft, window) should not exceed 2 meters,
otherwise water can accumulate in the tube.
B - Condenser dryer
• Laundry moisture is eliminated through the water condenser
and collected in the condenser tank. You can avoid possible
interruption of drying procedure due to full water condenser if
clothes have been dried at reduced number of spin revolutions
or when drying 6/7 kg of clothes. It is recommended to direct
the condense discharge hose directly to the drain. Before
installing remove the hose from the back side of the appliance
(left under the cover).
• Display reads CONTAINER FULL and a beep is heard when
the water receptacle is full and should be emptied, preferably
after each drying cycle.
Power connectionPower connection
• Use the power cord to connect the dryer to the power supply
via wall socket.
• Rated voltage and other characteristics are indicated on the
name plate, located under the door frame of the appliance.
The wall socket should always be within reach. It has to
be earthed according to the standing regulations.
If the supply cable is damaged it should only be
replaced by a qualifi ed technician.
129530
7
Operation
A - program selection jog
B - MENU key
C - SELECTION key
Program selection jogProgram symbolsMoisture level
cottonvery dry
syntheticsdry
delicatedry for storage
fast programslightly damp
time settingiron dry
wool
ventilation
mixed laundry
Function keys
B key (MENU) - Scrolling within main menu.
C key (SELECTION) - Selecting sub-menu categories.
D key (START /PAUSE) - Starting, interrupting and restarting the program.
D - START/PAUSE key
E - display
129530
8
Drying procedureDrying procedure
- Open the dryer door by pushing the left-hand side of the
door towards the appliance.
- Sort the laundry according to the type of fabrics.
Do the buttons and zippers, tie the strings and pull out
the pockets.
Very delicate laundry should be put in a special
protective sack.
It is suggested to load the drum with items of different
sizes.
Do not load drip-wet laundry into the dryer (min. 800
rpm).
Pay attention to the labels on the clothes, indicating
the recommending drying mode (see table of textile
treatment symbols on the last page).
- Insert the laundry into the drum (prior making sure that the
drum is empty).
- Close the dryer door.
Operating the dryerOperating the dryer
- Starting the appliance
1. Name of program, 2. Moisture level, 3. Additional functions
The appliance is switched on by turning the jog button (A) to
the desired program (depending on the type of laundry, degree
of moisture, and/or drying time). Display is lit and indicates the
program, selected by the jog A (in some models there is a signal
LED on the A button next to the selected program).
If you fail to do anything within 5 minutes after starting the
appliance, the display will go blank. During the drying process
the display is illuminated and is switched off after the cooling
stage.
- Selecting language
Press button C (SELECTION), and simultaneously turn the
program selector jog A to the fi rst clockwise position. Display
indicates the default setting of language. Use button C
(SELECTION) to select the desired language. Last selected
language is stored.
9
129530
Turn the appliance off by turning the program selector jog A to
the position “0”.
- Selecting basic drying programs
• For the programs cotton , synthetics and delicate
laundry
chart). To start drying cycle press START or select additional
settings.
select the fi nal moisture level (see program
• For the time defi ned program
time. To start drying cycle press START or select additional
settings
• Mixed laundry program
already have one single moisture level already predetermined.
Select only the additional settings (see program chart). To
start drying cycle press START
• Wool program
is a separate short time defi ned program.
set the preferred drying
and quick drying program
- Selection of additional functions
Button B (MENU) moves you within the menu, button C
(SELECTION) serves to select options (see cf. Selection of
additional functions).
Only MENU functions available for a particular program are
displayed. When the preferred additional function is selected, the
display indicates relevant symbol. After the appliance is switched
off, all additional functions, except the sound signal and child
lock, are reset to their original settings.
Delayed start
Default setting does not include delayed start (display indicates
00:00 hours). Use button C to select between 0 and 20 hours.
For the fi rst two hours the sequence may be set at 30 minute
lapses, after that the sequence is 1 hour. When the preset
time elapses, the selected program starts. In case of power
failure prior the end of the countdown (display fl ashes POWER
FAILURE), press button D (START).
129530
Reduced temperature
This function is selected if you wish to dry laundry at lower
temperature than the program default (see Program Chart). By
selecting this function the drying time is longer.
Certain programs do not allow selection of this function.
After drying is completed, this function returns to the
initial higher temperature.
10
Anti-crease program
The anti-crease program is set at 1 hour by default. You may
also select either to switch off the program (0 h) or prolong the
program to last 2 hours (2 h).
The anti crease program is stopped if you open the door of the
appliance during the program, or if you switch the appliance off.
Heater off
Heater may be switched off if you wish to dry laundry at room
temperature; drying time is extended (see cf. Selection of
additional functions).
Child protection
Operation of the dryer may be protected against accidental
changes of programs or functions. The function is activated by
pressing the START button.
By pressing any key the sound alarm signals that child lock is on.
Relevant symbol fl ashes, and the display reads CHILD LOCK
ON.
If you want to set new drying program, or change additional
settings, you must fi rst remove the protection.
Switching the function off:
- during drying:
If you want to interrupt the program or change settings, switch off
the function temporarily by keeping the B button (MENU) pressed
for 4 seconds. During this time the program can be stopped
by pressing D button (see cf. Interruptions). Relevant symbol
fl ashes on the display. The function is reactivated by pressing the
D button (START).
In case you fail to change anything within 15 seconds, the
protection is automatically reactivated. Even if you stop drying
by opening the door and child lock is temporarily switched off, it
is automatically restarted if the door is closed within the next 15
seconds.
If you switch off the protection in the menu during the
interruption, it will no longer be active when the program
continues.
- after drying is completed:
By pressing the B button (MENU) for four seconds after the
drying program is completed, the protection is switched off
permanently. This means that it will remain inactive also the next
time you start the drying procedure. Otherwise the protection
remains active till the next drying process. It is switched off by a
four second pressing of B button (MENU), while the A button is
turned to position “0”, so you can select the drying program or
additional functions.
129530
11
Sound signal (audible warning)
In default setting the sound signal is on.
You may select to switch the sound signal off, or increase
volume.
Legend:
normal sound signal setting;
If you switch the sound signal off the display indicates relevant
symbol
.
Prior fi rst drying remove the basket and any wrappings
from the drum.
sound signal off;
increased volume setting.
Drying in a basket (only with some models)
This function may be selected only at time defi ned drying. Default
setting is off. When this function is selected, the anti-crease
program is switched off.
Before installing the basket, it is necessary to remove the fi lter
situated on the lower side of the door opening. Remove the fi lter
by means of a tool (screw driver).
After the drying is over, replace the fi lter again. The basket drying
function is used to dry sneakers or other things which you want
to prevent from tumbling within the drum (max. load: 2,5 kg). Be
careful to avoid things which are being dried to touch the drum
as they may get stuck and thus damaged. During this function
the basket remains still. Dry only clean sneakers. Wring them
after washing to such extent that they do not drip water prior
inserting into the dryer.
After all functions are selected, move to the main menu with
the MENU button. Display fl ashes START. If you agree with
all selected functions, press START for the commencement of
drying, otherwise select any other functions as preferred.
After the machine had been switched off (program selector
jog (A) is at the position “0”), all additional functions return
back to their default settings, except for the sound signal
and the child lock.
Drying procedureDrying procedure
129530
12
• Drying process is turned on by pressing the START button.
• If the preset delayed start was selected, the process will start
when the preset time elapses.
• Display indicates the program with all selected functions, and
the beep signals the commencement of drying.
• The display indicates different drying stages in their sequence,
according to the selected program.
Press the START button to confirm commencement of drying
Press the START button to confi rm commencement of drying (program starts when the delayed start time elapsed)
(program starts when the delayed start time elapsed)
Maximum moisture level of laundry
Maximum moisture level of laundry
Laundry has reached ironing moisture level
Laundry has reached ironing moisture level
Laundry has reached the preset moisture level (slightly moist)
Laundry has reached the preset moisture level (slightly moist)
Cooling down (10 minutes at the end of a particular program)
Cooling down (10 minutes at the end of a particular program)
End of drying. Empty the condenser tank (with condensation
End of drying. Empty the condenser tank (with condensation
dryer).
dryer).
Clean the fi lter.
Clean the fi lter.
- End of drying procedure
At the end of the drying procedure the display indicates END and
CLEAN FILTER, and the beep is heard.
In case of condenser dryer the display intermittently fl ashes
CLEAN FILTER - EMPTY CONTAINER.
If the appliance is not switched off and/or the door is not opened,
the anti-crease program switches on (according to settings from
cf. Selection of additional functions) and the dryer continues with
gentle tumbling.
Pull the power lead from the socket and cut the power supply
from the mains.
13
129530
InterruptionsInterruptions
• By the user
Changing the program or the functions
After drying be careful when extracting laundry from
the appliance, as it may be hot!
Prior any changes child lock must be deactivated!
By pressing button D (START/PAUSE) the drying program is
paused; display reads PAUSE.
You can now change additional settings or basic programs.
Press MENU to enter any menu and change additional settings
or select another drying program. Confi rm by pressing D
(START/PAUSE).
You can switch the appliance off (turn jog A to the position “0”)
and reset all preferred settings.
Door opened
If the door is opened during the drying process this will pause the
operation; the display reads DOOR OPEN.
When the door is closed, the drying process resumes only after
the (D) START/PAUSE button (D) is pressed. The beep reminds
you that the drying process continues.
If you press the START/PAUSE button D when the door is open,
the display indicates the CLOSE DOOR warning and sound
signal beeps.
129530
• Power failure
After the power supply has been restored the display
intermittently reads POWER FAILURE. To continue press the
START (D) button and the machine will continue from the point
it had been interrupted, all previous settings remain the same
as before the failure.
If you wish to change settings or originally selected program,
you can do it by simply pressing MENU or turn the selector jog
to the desired program.
Confi rm the selection by pressing START, and continue as in
normal setting procedure.
In case of power failure child lock is not switched off (if
it was active prior the failure).
• Water container is full
(condenser dryer only)
When the water container is full the drying program is
interrupted. Display reads CONTAINER FULL and a beep is
heard.
After emptying the water from the container, resume drying by
14
pressing the D button (START/PAUSE).
Special functionsSpecial functions
• Drum lamp
The drum is illuminated when the appliance door is open. If the
door is open for more than 5 minutes and no changes to the
settings have been made, the lamp goes off.
• Display illumination
Display illuminates when the program selection jog is turned to
any program position.
If you then do nothing for the next 5 minutes (if you fail to
move the program selector or press any of the function keys),
the illumination goes off.
The display is lit during the drying stage and cooling process.
It goes off 5 minutes after the end of drying, but if you open the
door or press any key, the display illuminates again.
Tips for drying and for the economic use of the dryer
• Drying is economically most effective if you dry the recommended quantity of laundry per one
charge (see Program Chart).
• Do not dry the laundry made of especially sensitive fi bers (wool, silk), which may shrink or lose
shape.
• It is not necessary to use a fabric conditioner when washing the laundry, since drying makes it
soft and tender.
• Drying time is much shorter and consequently the energy consumption lower if laundry is well
spun prior tumble dring (minimum 1000 spin RPM).
• By selecting the most suitable drying program, you will avoid over-drying and deffi cult ironing.
• By cleaning the fi lter on regular basis drying time is shorter and consumes less energy.
• When drying a smaller quantity of laundry, or individual pieces of clothing, the sensor may not
be able to perceive the actual moisture in the fabric. Hence, it is advisable to use either the
programs for drying the laundry more thoroughly or time setting programs when drying less
laundry or single pieces of it. It is generally recommended to dry larger quantities of laundry, as
this will save both time and energy.
15
129530
Cleaning and maintenance
Cleaning the fi lter Cleaning the fi lter
Cleaning the
Cleaning the
condensation dryer
condensation dryer
• After every drying clean the fi lter, located in the inner part of
the door.
• Lift the fi lter lid (Fig.).
• Pull your fi ngers over the fi lter to remove fi bers and threads
lining. Replace the fi lter cover.
• If necessary, also clean the fi lter housing and door sealing.
Cleaning of the fi lter on the lower side of the door opening
(only with some models)
Before removing clothes from the drum, clean the fi lter on the
lower side of the door opening with a damp cloth or wet hand.
If the fi lter is clogged in such way that it needs washing, pull it
out from its bed (Fig.), wash it under hot water and dry. Be sure
that the replaced fi lter snaps safely to its position, and only then
close the fi lter lid.
If the fi lter is not regularly cleaned, the airfl ow is
obstructed, which causes longer drying time and
danger of overheating.
Empty the container and occasionally clean the water
condensation device.
129530
Emptying the water containere
Empty the container after every drying procedure: pull the
container out, pull out the draining nozzle, pour out the water and
replace the container.
Water from condenser tank is not drinkable! If fi ltered it
may be used for ironing.
Strictly switch the appliance off prior cleaning (unplug
the power cord from the wall socket, or turn the
program selector jog to the position “0”).
• Clean the casing and drum interior with soft cloth and mild
detergent.
Cleaning the water condensation device
Clean water condenser two to three times a year. In case of
frequent use of the appliance do it even more often. Certain
16
amount of water may drip from the condenser when pulled out,
so use absorbing cloth for this operation.
• Open the exterior lid of the condenser by grabbing the handle
on the lower left part of the appliance housing and pull it
downwards.
• Remove interior hatch by rotating the lever vertically down, tilt
the hatch towards you and remove it.
• Turn the lock on the condenser upwards and pull the
condenser out by pulling the lever.
• Clean the device from both sides with lukewarm water and
drain it well.
• Before replacing it into its slot, clean the air channel in which
the device is mounted, and the gasket at the interior lid.
• Lock the condenser into its place.
• Insert the inner lid to seal well and lock it with a handle.
• Push the exterior lid towards the appliance to lock to its place.
After fi ve drying cycles you need to do the following:
• remove, clean/wash and refi t the fi lters on the interior side of
the door and the bottom side of door opening;
• remove, clean/wash and refi t water condenser;
• wipe the inside of the water condenser compartment with a
damp cloth;
• wipe the entire back of the water condenser housing with a
damp cloth (reach deeply into the condenser compartment
with your hand to touch the back wall of the compartment!);
• wipe all sealings and sealing surfaces of the condenser,
condenser housing and condenser door with a damp cloth.
Cleaning of evacuation
Cleaning of evacuation
drier
drier
Replacing the bulb
Replacing the bulb
(only with some models)
(only with some models)
• Periodically clean (vacuum) the interior of air evacuation
opening and evacuation tube.
• Before replacing the bulb disconnect the power cord from the
wall socket.
• Open the door.
• Unscrew the cover of the bulb (inside the door opening).
• Replace the bulb. The bulb must be of the same type and
power as indicated on the bulb and on the protective cover
(max. 10 W).
• Reinsert and tightly screw the cover back. Check if it seals
well, otherwise moisture may penetrate the interior and cause
short circuit.
129530
17
Troubles
Interferences from the ambient (for example electrical wiring) could induce signalization of different
faults. In such cases:
- switch the appliance off, and wait for a few seconds;
- plug in the appliance and repeat the drying program.
If the fault repeats, call authorized service shop.
Warranty shall not apply in case of failures due to interferences from the environment (lightning
stroke, power supply circuit faults, natural disasters).
TroubleCheck
Appliance does not work:• If there is current in the socket and if the fuse is functioning.
There is current in the
socket, but the drum is not
rolling:
Laundry is not dry:• If the fi lter is clean.
The condensation is
inadequate:
Unevenly dried laundry:• If the amount of laundry to be dried is not too big.
In case of certain functional failures the appliance signals it with a beep and relevant reading is
fl ashing on the display.
• If the plug is correctly inserted into the socket.
• If the door is closed tightly (press it towards the appliance).
• If the program runs according to instructions.
• If the container is full (only with condensation dryer).
• If appropriate drying time is selected.
• If the condensation device is clean (only with condensation
dryer).
• If the room is adequately ventilated.
• If the amount of laundry to be dried is not too big.
• If the evacuation tube is too long (only with evacuation dryer
- max 2 m).
• If the laundry loaded in the drum has not been spun enough or
if appropriate drying time has been set.
• If the room is too hot (over 25°C, applies for condensation
dryer).
• If the room temperature is too high.
• If the condensation device is clean.
• If there are only large pieces of laundry (large and small pieces
should be dried together).
• If different fabrics are dried together (group the laundry
according to the type of fabrics).
If a failure occurs due to incorrect installation or inappropriate use of the appliance, the guarantee
is void, and the repair bill is charged to the user.
In case of F0, F1, F2, F3, F4 failures, contact your
service technician without hesitation.
129530
18
Tables
Program chart
ProgramType of laundryExample of laundry
COTTON
Very dry
Dry
Dry for storage
Slightly damp
Iron dry
SYNTHETICS
Dry
Dry for storage
Slightly damp
Iron dry
DELICATE max. load: 2,5 kg / 3 kg
Dry for closet
Slightly damp
QUICK PROGRAM max. load: 3 kg / 3,5 kg
Dry for storage
TIME SET PROGRAM
15 to 60 minutes
max. load: 6 kg / 7 kg
Thick or multiple layer laundry.Terry cloth, bathrobe
Thick laundry not requiring ironingTerry cloth, tricot laundry
Uniformly thick laundry, requiring little or
no ironing.
Fine laundry requiring ironing.Tricot, fi ne cotton undershirts
Normally thick cotton or fl ax laundry.Bed linen, table cloth,
max. load: 3 kg / 3,5 kg
Thick or multiple layer synthetic or mixed
fabrics laundry.
Uniformly thick laundry not requiring
ironing.
Fine laundry, requiring little or no ironing.Tricot laundry, undershirts,
Laundry for ironing.Shirts, blouses, bed linen,
Delicate laundry, to be dried at reduced
temperature and requires no ironing.
Delicate laundry, to be dried at reduced
temperature and requires ironing.
Laundry from temperature resistant
fabrics, to be dried quickly.
max. load: 3 kg / 3,5 kg
Single pieces of thick laundry that has to
be completely dried, or small amount of
laundry (up to 1 kg), ...
Basket drying (certain models only).
Straightening of laundry - following prior
wringing.
Terry cloth, tricot laundry
trousers, shirts, undershirts ..
Pullovers, dresses, blankets
Shirts, blouses, bed linen,
socks, children clothes
table cloth, shirts, dresses,
sports attires
table cloth, ...
Blouses, delicate underwear
Blouses, delicate underwear
Sports attires from cotton or
from mixed fabrics
Bathrobe, bathing towels,
pullovers, ...
Sports footwear, ...
AERATION
20 minutes
Laundry to be aired quickly (heater
off).
Worn clothing
129530
19
ProgramType of laundryExample of laundry
WOOL
max. load: 2 kg
FinishShort program for loosening of woolen
products.
MIXED LAUNDRY
Dry for storage
max. load: 3 kg / 3,5 kg
Mixed cotton and combined fabrics
laundry.
Program chart /
additional functions
ProgramAdditional-functions
Cotton
Synthetics
Delicate
Quick program
Time set program
Wool
Mixed laundry
Delayed
start
zzzzz
zzzzz
zzzz
zzzzzzz
zzzzz
Lower
tempera-
ture
Anti-
crease
zzz
Heater
Child lockSound
off
zzz
Machine washable woolen
clothing.
Extract laundry from the
dryer immediately after
drying and hang it.
Bed linen, table cloth,
clothes
Drying in
signal
basket
zpossible
129530
20
Remark: Both functions of temperature reduction and of heater
switching-off exclude each other.
Table of consumption
values
For illustration the chart gives values for 6/7 kg of testing laundry
(measured by the EN61121 standard) on different RPM of fi nal
spin in washing machine (program dry for storage).
Measured values may differ from the actual ones due to
fl uctuations in the type or quantity of laundry, spinning, power
oscillation as well as ambience temperature and humidity.
Drying
Drying in dryer not permitted
Drain, hang on washing line and dry
Do not drain, hang wet and dry
Power consumption
in kWh
Drain, lay on a fl at surface and dry
Machine drying not permitted
Drying at normal temperature
Drying at lower temperature
129530
21
129530
22
SP PG3,4 OEM129530/en (02-08)
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.