Smeg 129316 User Manual

Instructions for Use

Tumble Dryer

Thank you for your trust and for buying our tumble drier. We congratulate you on your wise decision. This appliance is designed for drying clothes for home use only. The dryer enables quick drying of your laundry, leaving it soft and tender without affecting its shape. Our appliances are environmentally friendly: some of the materials are recyclable while others are disposed of and destroyed. To protect the environment, dispose of your appliance by delivering it to the authorized dealer.

The appliance is intended exclusively for use in households. If the appliance is used for professional purposes, for proﬁ t, or for purposes beyond regular use in a household, or if appliance is used by a person who is not a consumer, the warranty period equals the shortest warranty period possible as stipulated by the relevant legislation.

129316

Appliance description ....................................... 3

Warnings ............................................................ 4

Installation and connection .............................. 6

Operation.......................................................... 10

Tips for drying and for economic use of the

dryer.................................................................. 15

Cleaning and maintenance ............................. 16

Troubles............................................................19

Tables ............................................................... 21

Appliance description

1. Front panel

2. Drying program button 3 Water container

4. Door

Technical data

(depending on model)

5. Condenser

6. Evacuation slots

7. Cooling air slot

8. Legs

Dimensions of the appliance (w x d x h): 600 mm x 600 mm x 850 mm Weight (net): evacuation dryer 34 kg, condensation dryer 42 kg Nominal voltage: 230 V, 50 Hz Connecting power: 2900 W Max. load: 6 kg / 7 kg Connection: power cord (230 V, 50 Hz, min 16 A) Fuse: 16 A Heater: 2600 W

Name plate with technical information for the appliance is located

under the door frame.

129316

Warnings

Use the dryer to dry only the laundry washed with water. Do not attempt to

•

dry the laundry, washed or cleaned with ﬂ ammable detergents or solutions (gasoline, trichloroethylene etc.), as it may cause explosion.

Do not let the children play with the appliance. Prevent your children or pets to

•

enter the dryer drum.

When discarding the old appliance remove the power cord and breka the lock,

•

so that the door can not be locked (safety precautions for children).

After cleaning replace the condenser to the air channel. Operating the

•

appliance without the condenser or with a damaged condenser may cause ﬁ re.

Rear wall of the appliance may be hot (for condenser drier only) - danger of

•

burns.

Clean ﬁ lter after each drying. If you pulled the ﬁ lter out, always reinsert it

•

before the next drying operation.

After use always turn the appliance off (the program selection jog (A) should

•

be in position “0”) and unplug the power cord.

Close the dryer door prior pulling out the water container.

•

Leave all repairs to a qualiﬁ ed technician. Tampering with the appliance or

•

reparations by an unqualiﬁ ed person may cause accidents or failures. Call the authorized service department (see list of authorized service departments).

Name plate with technical information about the appliance is located under

•

the door frame.

The room must be well aired, surrounding air must not contain dusty particles.

•

Room where the appliance is located must be well aired to prevent back ﬂ ow

•

of gasses, released by open ﬁ re gas appliances (ﬁ replace).

The warranty shall not apply to consumables (bulbs), minor discoloration or

•

deviations of color, increased noise level as a consequence of appliance age, which does not affect appliance functionality, and aesthetical deﬁ ciencies which do not affect appliance functionality or safety.

To reduce the ﬁ re hazard, always consider the following:

Do not dry unwashed items in the tumble dryer.

•

Items that have been soiled with substances as cooking oil, acetone, alcohol,

•

petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer.

Items such as foam rubber (latex foam), shower caps, waterproof textiles,

•

rubber backed articles and clothes or pillows ﬁ tted with foam rubber pads

129316

should not be dried in the tumble dryer.

Fabric softeners, or similar products, should be used as speciﬁ ed by the fabric

•

softener instructions.

The ﬁ nal part of a tumble dryer cycle occurs without heat (cool down cycle) to

•

ensure that the items are left at a temperature that ensures that the items will not be damaged.

Before connecting the appliance read

these instructions carefully. Repairing the failure arising from inappropriate connections or use of the appliance is not covered by the guarantee.

The belt can be replaced by a servising

engineer only, who incorporates an original spare part with the marking OPTIBELT EPH 1906, code 104265, OPTIBELT 8 EPH 1941, code 160165 (depending on model).

The symbol on the product or on its packaging indicates that this product may not be treated as household waste.

Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of thisproduct. For more detailed information about recycling of this product, please contact your local city ofﬁ ce, your household waste disposal service or the shop where you purchased the product.

Never stop a tumble dryer before the end

of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.

129316

Installation and connection

Removing wrapping

Selecting the appropriate location of the appliance

Packaging materials are environmentally friendly:

•

they can either be recycled, safely disposed of or destroyed without any threat to the environment.

To be able to do this effectively all materials are

•

marked accordingly.

Be careful not to damage cabinet of the

appliance with a sharp object when removing the packaging.

Before connecting the appliance, let it

warm up to room temperature (wait for two hours).

Ventilation slots and openings on the appliance front and rear wall should not be obstructed.

A - Evacuation dryer

Place the appliance in a well ventilated room with

•

a window or a built-in fan.

Connect the evacuation tube to the pre-prepared

•

opening.

Evacuation must not be connected to air duct

•

used as a chimney for exhaust gasses of appliances using other combustion material.

129316

B - Condensation dryer

Do not place the appliance in a room where there

•

is danger of freezing.

Location should be adequately ventilated. Room

•

temperature should always be between 0°C and 25°C since frozen water in the condensation container or in the pump may damage the dryer.

Installation

Appliance can either stand on its own or can

•

be placed on top of a washing machine of the same dimensions - minimum width 517 mm, depth 476 mm. The surface for placing the dryer must be clean and ﬂ at. Use supplied vacuum feet to prevent sliding of the appliance. Washing machine hardtop must be wooden or metallic. To conceal the opening between the two appliances, decorative plate is available on request against payment.

Do not place the appliance behind lockable

door, sliding door, and door with hinges on the opposite side of the appliance. Place the appliance in the room in such way to ensure free opening of the drier door.

Level the machine longitudinally and transversally

•

by rotating the adjustable feet, thus enabling the leveling by +/- 1 cm.

Vibrations, moving of the appliance and

loud operation due to incorrect setting of the adjustable feet shall not be covered by this warranty.

The appliance should be placed on a

surface with concrete base; the surface should be dry and clean in order to prevent slipping. The adjustable feet should also be cleaned before installation.

Do not place the dryer on a thick

carpet since this could obstruct the air circulation.

129316

+ 16 hidden pages