EZ1024DT (With SMC Green Saving)
EZ Switch™ 10/100
Product Overview
ports deliver dedicated 10/100 Mbps links to each attached LAN segment – all with conventional cabling and adapters. Auto-negotiation
is used to select the optimal communication mode for each connection. Auto-sensing is used to select the optimal transmission speed
for each connection. With store-and-forward switching and flow control, maximum data integrity is always maintained, even under heavy
loading. Easy installation and reliability make this plug-and-play switch an ideal choice for smooth Fast Ethernet integration.
.
Key Features and Benefits
SMC Green Saving
SMC Green Saving Technologies are intelligent, innovative algorithms that detect link status and distance to best save power while
maintain
• Power saving by Auto-Detection of the number of active ports
• Power saving by Cable length Auto-Detection
High Performance & Functionality
• Switching Fabric of 3.2 or 4.8 Gbps – non-blocking
• Filtering and forwarding at full wire speed on all ports
• Automatic address learning
• Buffered “store-and-forward” architecture prevents propagation of bad packets
• Half- and full-du
erformance and stability.
lex flow control prevents packet loss under heavy loadin
-
-
Easy to Install and Use
• Plug and Play nothing to configure
• Auto-Negotiation for automatic selection of speed and operating mode
• Comprehensive array of LEDs for “at-a-glance” monitoring of traffic on all segments
• Auto-MDIX ports eliminate concern over cabling and uplinks
• Desktop and rack mountable
• IEEE 802.3, 802.3u
• IEEE 802.3x full-duplex flow control
Power Saving
Plug ‘N’ Play Rackmountable
Universal Power
Features
26.7 x 16.1 x 4.2 cm (10.5 x 6.3 x 1.7 in)
Computer with 10/100Mbps Network Adapter
Physical Ports
• SMC-EZ1016DT: 16 RJ-45 10/100 BASE-T ports
• SMC-EZ1024DT: 24 RJ-45 10/100 BASE-T ports
Indicator Panel
• Power – One LED
• Ports: Link/Act – One LED per Port
• 8 K entries
Memory Buffer
• SMC-EZ1016DT: 160Kbytes
• SMC-EZ1024DT: 160Kbytes
Power Consumption
• SMC-EZ1016DT: 6.831 Watts
• SMC-EZ1024DT: 8.514 Watts
Power Requirement
• Input Voltage: 100 - 240 VAC@50-60 Hz
Dimensions and Weight
• SMC-EZ1016DT: 21.6 x 13.3 x 4.2 cm (8.5 x 5.2 x 1.7 in)
• SMC-EZ1016DT: 870g (1.9 lbs)
•
-
• SMC-EZ1024DT: 1376g (3.0 lbs)
Regulatory Compliance
• EMC/Safety Compliances
•CE Mark
• Immunity
• EN 61000-4-2/3/4/5/6/8/11
• Emissions
• FCC Class A, CISPR Class A, EN 61000-3-2/3
Environmental Specification
• Temperature: Operating: 0 ~ 40 ºC / 32 ~ 104 ºF
• Humidity: 10% to 90% non-condensing
Warranty
• 3 Years
Performance
• SMC-EZ1016DT
• SMC-EZ1024DT
− Switch Fabric : 3.2 Gbps (non-blocking)
− Throughput : 2.4Mpps
− Switch Fabric : 4.8 Gbps (non-blocking)
− Throughput : 3.6Mpps
Contact Information
SMC Networks Asia Pacific
1 Coleman Street #07-09
The Adelphi
Singapore 179803
Tel : +65 6338 7667
Fax : +65 6338 7767
Check www.smc-asia.com for your local country contact information
Other Information
System Requirements Product Package Contents
•
• Ethernet cable (not included)
•
• Four rubber foot pads
• Rack-mount bracket kit
• Appropriate AC power cord
• This User Manual
• SMC Warranty Registration Card
• Quick Installation Guide
-
-
v2