SMC Networks SMC8504T User Manual

0101001100100100010010110010101010011010010
Switches/Hubs
EZ SwitchTM 10/100/1000
4-port Unmanaged Layer 2 + Gigabit Switch
Model Number::
SMC8504T
Network Administrators will find the SMC8504T an easy solution to integrate into a network as technolo­gy migrates toward gigabit. It’s Store-and-Forward architecture combined with 32k MAC Address Table ensures data integrity as the network is optimized to run at full wire speeds.
Gigabit Ethernet is the perfect solution to bottlenecks at the core of the network that are the inevitable result of data-intensive applications and the proliferation of new users. SMC’s EZ Switch 10/100/1000 provides a seamless migration to higher-speed networking while solving bandwidth issues.
38 Tesla Irvine,CA 92618 1-800-SMC-4YOU www.smc.com
Overview
Features
• Full and Half duplex on all 10/100 ports with Full-duplex mode for 1000Mbps
• 32k MAC Address Table
• Store-and-Forward mode with wire-speed filtering and forwarding
• Auto MDI/MDIX on 1000BaseT ports
• Store-and-forward switching ensures error­free transmission
• Half- and full-duplex flow control
• Smar t function compatible for :
-Support on console port for switch
configuration change
-Support per port Port-based VLAN and L2
Trunking with link fail-over
-Support four Priority queues on each port
• Plug and play
• Built-in wiring crossovers on all por ts
• "At-a-glance" LEDs for port and system status monitoring
• Desktop and rack mountable
Benefits
• Store-and-Forward and wire-speed filtering and forwarding rates ensures error free transmission of data packets within the network
• ANSI/ IEEE compliance ensures compatibility with standards-based hubs,switches and cards from any vendor
• Half- and full-duplex flow control prevents packets from being dropped under heavy loading
• Smart function compatible for advanced networking procedures within the network to ensure priority settings can still be maintained
• Plug and play for ease of installation,maintenance and use.
• Built-in wiring crossovers on all ports allow connections to servers and workstations to be made with straight­through cabling
• "At-a-glance" LEDs for port and system status monitoring
• Desktop and rack mountable allowing flexibility within your network design
Compatible
• IEEE 802.3 Ethernet
• IEEE 802.3u Fast Ethernet
• IEEE 802.3z Gigabit Ethernet
• IEEE 802.3x Flow Control
EZ SwitchTM 10/100/1000
4-port Unmanaged Layer 2 + Gigabit Switch
SMC8504T
Switches/Hubs
0101001100100100010010110010101010011010010
SPECIFICATIONS
Ports
SMC-EZ8504T
• 4 10/100/1000Mbps RJ-45 Auto-sensing ports
Network Interface
• RJ-45:100ohm, UTP/ STP cable
• 10/100Base – EIA/ TIA Categories 3 or 5 cable
• 1000Base – EIA/ TIA Categories 5,4 pairs
LEDs
• 1000Mbps – one per port
• 100Mbps – one per port
• 10Mbps – one per port
• FDX/ COL (full duplex/ collision) – one per port
• Act (activity) – two per port (TX, RX)
Switching Method
• Store – and – forward
MAC Address Table
• 32K entries
Memory Buffer
• 8Mbyte per unit
Filtering/ Forwarding/ Learning Rates
• Full line rate
Maximum Current
• 0.2A ¢N110 VAC
• 0.1A ¢N240 VAC
Standards
• IEEE 802.3 Ethernet
• IEEE 802.3u Fast Ethernet
• IEEE 802.3z Gigabit Ethernet
• IEEE 802.3x Flow Control
EMC/ Safety Compliances
• CE Mark Emissions
• FCC Class A Safety
• UL
Warranty
• Limited Lifetime
Size
• 12.99 x 8.66 x 1.73 in (33 x 22 x 4.4 cm)
Weight
• 4.18 lbs (1.9kgs)
Temperature
• Operating:32° to 122˚F (0°to 50˚C)
Humidity,non-condensing
• 5% to 90%
Power Requirements
• Universal AC input:100 to 240 VAC, 50 to 60 Hz
Product Description
SMC8504T 4-port Unmanaged Layer 2 + Gigabit Switch
Loading...