SMC Networks SMC7904WBRA-N2 - User Manual

USER MANUAL

SMC7904WBRA-N2

ADSL2 Barricade

TM

N

11n Wireless 4-Port ADSL2/2+ Modem Router

SMC7904WBRA-N2

User Manual

User Manual

i

Contents

1 Compliances ...................................................................................................... 1

1.1 Europe – EU Declaration of Conformity ........................................................ 1

2 Safety Precautions ............................................................................................. 5

3 Précautions de sécurité ...................................................................................... 6

4 Sicherheitsmaßnahmen ..................................................................................... 7

5 Precauciones de seguridad................................................................................ 8

6 Precauções de Segurança ................................................................................. 9

7 Overview .......................................................................................................... 10

7.1 Packing List ................................................................................................. 10

7.2 Application ................................................................................................... 10

7.3 Features ...................................................................................................... 11

7.4 Standards Compatibility and Compliance .................................................... 12

8 Hardware Description and Installation ............................................................. 12

8.1 Hardware Description .................................................................................. 12

8.1.1 Front Panel .................................................................................................. 12

8.1.2 Rear Panel ................................................................................................... 14

8.2 Hardware Installation ................................................................................... 15

8.2.1 Choosing the Best Location for Wireless Operation .................................... 15

8.2.2 Connecting the Router ................................................................................. 15

9 PC Network Configuration and Login ............................................................... 17

9.1 PC Network Configuration ........................................................................... 17

9.2 Logging In to the DSL Router ...................................................................... 19

10 Web-Based Management ................................................................................ 20

10.1 Start ............................................................................................................. 22

10.1.1 Wizard Setup ....................................................................................... 22

10.1.2 Wireless ............................................................................................... 26

10.1.3 LAN ...................................................................................................... 40

10.1.4 LAN Configuration ............................................................................... 40

10.2 Advanced Setup .......................................................................................... 45

10.2.1 Layer2 Interface................................................................................... 46

10.2.2 WAN Service ....................................................................................... 48

10.2.3 NAT ...................................................................................................... 72

User Manual

ii

10.2.4 Security ................................................................................................ 76

10.2.5 Parental Control ................................................................................... 80

10.2.6 Quality of Service ................................................................................ 82

10.2.7 Routing ................................................................................................ 86

10.2.8 DNS ..................................................................................................... 90

10.2.9 DSL ...................................................................................................... 91

10.2.10 UPnP ................................................................................................... 92

10.2.11 DNS Proxy ........................................................................................... 93

10.2.12 Storage Service ................................................................................... 94

10.2.13 Interface Grouping ............................................................................... 95

10.2.14 Multicast .............................................................................................. 98

10.2.15 Wireless ............................................................................................... 98

10.3 Management .............................................................................................. 105

10.3.1 Passwords Settings ........................................................................... 105

10.3.2 Internet Time ...................................................................................... 106

10.3.3 Diagnostics ........................................................................................ 107

10.3.4 Settings .............................................................................................. 108

10.3.5 System Log ........................................................................................ 109

10.3.6 SNMP Agent ...................................................................................... 110

10.3.7 TR-69 Client .......................................................................................111

10.3.8 Access Control- Services .................................................................. 112

10.3.9 Update Software ................................................................................ 114

10.3.10 Reboot ............................................................................................... 114

10.4 Device Information ..................................................................................... 115

10.4.1 Summary ........................................................................................... 115

10.4.2 WAN .................................................................................................. 117

10.4.3 Statistics ............................................................................................ 117

10.4.4 LAN .................................................................................................... 117

10.4.5 WAN Service ..................................................................................... 118

10.4.6 xTM .................................................................................................... 118

10.4.7 xDSL .................................................................................................. 118

10.4.8 Route ................................................................................................. 120

10.4.9 ARP ................................................................................................... 120

10.4.10 DHCP ................................................................................................ 120

11 Q&A ................................................................................................................ 122

User Manual

1

1 Compliances

1.1 Europe – EU Declaration of Conformity

This device complies with the essential requirements of the R&TTE Directive
1999/5/EC. The following test methods have been applied in order to prove
presumption of conformity with the essential requirements of the R&TTE Directive
1999/5/EC:

- EN 60950-1:2006 + A11: 2009
Safety of Information Technology Equipment.

- EN 300 328 V1.7.1: 2006-10
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband

transmission systems; Data transmission equipment operating in the 2,4 GHz
ISM band and using wide band modulation techniques; Harmonized EN
covering essential requirements under article 3.2 of the R&TTE Directive.

- EN 301 489-17 V1.8.1/ 2008-04
EN 301 489-17 V2.1.1/ 2009-05

Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5
GHz high performance RLAN equipment.

- EN 62311: 2008
Assessment of electronic and electrical equipment related to human exposure

restrictions for electromagnetic fields (0 Hz - 300 GHz).

This device is a 2.4 GHz wideband transmission system (transceiver), intended for
use in all EU member states and EFTA countries, except in France and Italy where
restrictive use applies.

In Italy the end-user should apply for a license at the national spectrum authorities in
order to obtain authorization to use the device for setting up outdoor radio links and/or
for supplying public access to telecommunications and/or network services.
This device may not be used for setting up outdoor radio links in France and in some
areas the RF output power may be limited to 10 mW EIRP in the frequency range of
2454 – 2483.5 MHz. For detailed information the end-user should contact the national
spectrum authority in France.

User Manual

2

This equipment may be operated in:

The official CE certificate of conformity can be downloaded by selecting the relevant
model/ part number from www.smc.com -> support -> download.

Български

[Bulgarian]

С настоящето, SMC Networks декларира, че това безжично

устройство е в съответствие със съществените изисквания и

другите приложими разпоредби на Директива 1999/5/EC.

Česky

[Czech]

SMC tímto prohlašuje, že tento Router je ve shodě se základními

požadavky a dalšími příslušnými ustanoveními směrnice

1999/5/ES.

Dansk

[Danish]

Undertegnede SMC erklærer herved, at følgende udstyr Router
overholder de væsentlige krav og øvrige relevante krav i direktiv

1999/5/EF.

Nederlands

[Dutch]

Hierbij verklaart SMC dat het toestel Router in overeenstemming

is met de essentiële eisen en de andere relevante bepalingen

van richtlijn 1999/5/EG.

English

Hereby, SMC, declares that this Router is in compliance with the

essential requirements and other relevant provisions of Directive

1999/5/EC.

Estonian

Eesti

Käesolevaga kinnitab SMC seadme Router vastavust direktiivi
1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele

teistele asjakohastele sätetele.

Finnish

Suomi

SMC vakuuttaa täten että Router tyyppinen laite on direktiivin

1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin
muiden ehtojen mukainen.

User Manual

3

French

Français

Par la présente SMC déclare que l'appareil Router est conforme

aux exigences essentielles et aux autres dispositions pertinentes
de la directive 1999/5/CE.

German

Deutsch

Hiermit erklärt SMC, dass sich das Gerät Router in

Übereinstimmung mit den grundlegenden Anforderungen und
den übrigen einschlägigen Bestimmungen der Richtlinie
1999/5/EG befindet.

Greek

Ελληνική

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ SMC ΔΗΛΩΝΕΙ ΟΤΙ Router

ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ

ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

Hungarian

Magyar

Alulírott, SMC nyilatkozom, hogy a Router megfelel a vonatkozó

alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb

elõírásainak.

Italian

Italiano

Con la presente SMC dichiara che questo Router è conforme ai
requisiti essenziali ed alle altre disposizioni pertinenti stabilite

dalla direttiva 1999/5/CE.

Latviski

[Latvian]

Ar šo SMC deklarē, ka Router atbilst Direktīvas 1999/5/EK

būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lithuanian

Lietuvių

Šiuo SMC deklaruoja, kad šis Router atitinka esminius

reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.

Maltese

Malti

Hawnhekk, SMC, jiddikjara li dan Router jikkonforma mal-ħtiġijiet

essenzjali u ma provvedimenti oħrajn relevanti li hemm

fid-Dirrettiva 1999/5/EC.

Polish

Polski

Niniejszym SMC oświadcza, że Router jest zgodny z

zasadniczymi wymogami oraz pozostałymi stosownymi

postanowieniami Dyrektywy 1999/5/EC.

Portuguese

Português

SMC declara que este Router está conforme com os requisitos
essenciais e outras disposições da Directiva 1999/5/CE.

User Manual

4

Romanian

Romană

SMC Networks declară că acest dispozitiv fără fir respectă

cerinţele esenţiale precum şi alte dispoziţii relevante ale

Directivei 1999/5/EC.

Slovak

Slovensky

SMC týmto vyhlasuje, že Router spĺňa základné požiadavky a

všetky príslušné ustanovenia Smernice 1999/5/ES.

Slovenian

Slovensko

SMC izjavlja, da je ta Router v skladu z bistvenimi zahtevami in

ostalimi relevantnimi določili direktive 1999/5/ES.

Spanish

Español

Por medio de la presente SMC declara que el Router cumple con
los requisitos esenciales y cualesquiera otras disposiciones

aplicables o exigibles de la Directiva 1999/5/CE.

Swedish

Svenska

Härmed intygar SMC att denna Router står I överensstämmelse
med de väsentliga egenskapskrav och övriga relevanta

bestämmelser som framgår av direktiv 1999/5/EG.

Turkish

Turk

SMC Networks bu kablosuz cihazın temel gereksinimleri ve

1999/5/EC yonergesindeki ilgili koşulları karşıladığını beyan

eder.

User Manual

5

2 Safety Precautions

Read the following information carefully before operating the device. Please follow
the following precaution items to protect the device from risks and damage caused by
fire and electric power:

 Use the power adapter that is included with the device package.
 Pay attention to the power load of the outlet or prolonged lines. An

overburdened power outlet or damaged cords and plugs may cause electric
shock or fire. Check the power cords regularly, if you find any damage, replace
it at once.

 Proper space for heat dissipation is necessary to avoid any damage caused by

device overheating. The ventilation holes on the device are designed for heat
dissipation to ensure that the device works normally. Do not cover these
ventilation holes.

 Do not put this device close to a place where a heat source exits or high

temperature occurs. Avoid placing the device in direct sunshine.

 Do not put this device close to a place which is damp or wet. Do not spill any

fluid on this device.

 Please follow the instructions in the user manual/quick install guide carefully to

connect the device to your PC or other electronic product. Any invalid
connection may cause a power or fire risk.

 Do not place this device on an unstable surface or support.

User Manual

6

3 Précautions de sécurité

Lisez attentivement les informations suivantes avant d’utiliser votre appareil.
Respectez toutes les précautions afin de protéger l’appareil des risques et dégâts
provoqués par un incendie et l’alimentation électrique :

• Utilisez exclusivement l’adaptateur d’alimentation fourni avec cet appareil.

• Faites attention à la puissance de charge de la prise de courant ou des

rallonges électriques. Une prise surchargée ou des cordons et des fiches
endommagés peuvent provoquer une électrocution ou un incendie. Vérifiez
régulièrement votre câble électrique. Si vous constatiez le moindre défaut,
remplacez-le immédiatement.

• Il est primordial de laisser suffisamment d’espace autour de l’appareil pour

permettre la dissipation de la chaleur et éviter les dégâts provoqués par une
surchauffe de l’appareil. Les orifices de ventilation de l’appareil sont conçus
pour permettre la dissipation thermique et garantir le bon fonctionnement de
l’appareil. Ne couvrez jamais ces orifices.

• Ne placez pas cet appareil à proximité d’une source de chaleur ou dans un

endroit exposé à des températures élevées. Evitez également de l’exposer à
la lumière directe du soleil.

• Ne placez pas cet appareil à proximité d’un lieu humide ou mouillé. Prenez

garde à ne renverser aucun liquide sur cet appareil.

• Merci de suivre les instructions du manuel d'utilisateur / guide d’installation

rapide attentivement pour connecter l'appareil à votre PC ou à tout autre
produit électronique. Toute connexion non valide peut provoquer un problème
électrique ou un risque d'incendie.

• Ne placez pas cet appareil sur une surface ou un support instable.

User Manual

7

4 Sicherheitsmaßnahmen

Lesen Sie vor der Inbetriebnahme des Gerätes aufmerksam die nachstehenden
Informationen. Bitte befolgen Sie die nachstehenden Sicherheitsmaßnahmen, damit
das Gerät nicht beschädigt wird oder Gefahren durch Brand oder elektrische Energie
entstehen:

• Verwenden Sie nur das beim Gerät mitgelieferte Netzteil.

• Achten Sie auf die Last der Steckdose oder des Verlängerungskabels. Eine

überlastete Steckdose oder beschädigte Kabel und Stecker können
Stromschläge und Brand verursachen. Prüfen Sie die Netzkabel regelmäßig.
Ersetzen Sie sie umgehend, falls sie beschädigt sind.

• Achten Sie zur Vermeidung von Geräteschäden aufgrund von Überhitzung

darauf, dass genügend Freiraum zur Wärmeabfuhr vorhanden ist. Die
Belüftungsöffnungen am Gerät dienen der Wärmeabfuhr und damit der
Gewährleistung eines normalen Gerätebetriebs. Decken Sie diese
Belüftungsöffnungen nicht ab.

• Stellen Sie dieses Gerät nicht in der Nähe von Wärmequellen oder an Orten

mit hohen Temperaturen auf. Platzieren Sie das Gerät nicht im direkten
Sonnenlicht.

• Stellen Sie dieses Gerät nicht an feuchten oder nassen Orten auf. Achten Sie

darauf, keine Flüssigkeiten über dem Gerät zu verschütten.

• Befolgen Sie die Hinweise im Benutzerhandbuch (bzw. in der Kurzanleitung)

zum Anschluß des Gerätes an einen PC oder ein anderes Elektrogerät.
Jegliche unzulässige Verbindung birgt die Gefahr von Stromschlägen und
Brandgefahr.

• Platzieren Sie dieses Gerät nicht auf einer instabilen Oberfläche oder

Halterung.

User Manual

8

5 Precauciones de seguridad

Lea la siguiente información detenidamente antes de utilizar el dispositivo. Siga las
indicaciones de precaución que se mencionan a continuación para proteger el
dispositivo contra riesgos y daños causados por el fuego y la energía eléctrica:

• Utilice el adaptador de alimentación incluido en el paquete del dispositivo.

• Preste atención a la carga de potencia de la toma de corriente o de los

alargadores. Una toma de corriente sobrecargada o líneas y enchufes
dañados pueden provocar descargas eléctricas o un incendio. Compruebe los
cables de alimentación con cierta frecuencia. Si detecta algún daño,

reemplácelos inmediatamente.

• Deje un espacio adecuado para que se disipe el calor y evitar así cualquier

daño en el dispositivo causado por sobrecalentamiento. Los orificios de

ventilación del dispositivo están diseñados para disipar el calor y garantizar

que dicho dispositivo funciona con normalidad. No tape estos orificios de
ventilación.

• No coloque este dispositivo cerca de un lugar donde haya una fuente de calor

o temperaturas elevadas. Evite exponer el dispositivo a la luz solar directa.

• No coloque este dispositivo junto a un lugar húmedo o mojado. No derrame

ningún fluido sobre el dispositivo.

• Por favor, siga cuidadosamente las instrucciones que figuran en el

manual/guía de instalación rápida para conectar el dispositivo a su PC o a
cualquier otro producto electrónico. Cualquier conexión no válida podría

causar riesgo de descarga o de incendio.

• No coloque este dispositivo en una superficie o soporte inestable.

User Manual

9

6 Precauções de Segurança

Leia atentamente as seguintes informações antes de utilizar o dispositivo. Respeite
as seguintes indicações de segurança para proteger o dispositivo contra riscos e
danos causados por fogo e energia eléctrica:

• Utilize o transformador incluído na embalagem do dispositivo.

• Respeite a potência da tomada eléctrica e das extensões. Uma tomada

eléctrica sobrecarregada ou cabos e fichas danificadas podem causar
choques eléctricos ou fogo. Verifique regularmente os cabos de alimentação.
Caso algum se encontre danificado, substitua-o imediatamente.

• É necessário deixar algum espaço livre em volta do dispositivo para

dissipação de calor, de forma a evitar danos causados pelo
sobreaquecimento do dispositivo. Os orifícios de ventilação do dispositivo
foram concebidos para dissipar o calor e assegurar que o mesmo funciona
normalmente. Não bloqueie esses orifícios de ventilação.

• Não coloque este dispositivo junto a fontes de calor ou em locais com

temperaturas elevadas. Evite colocar o dispositivo sob luz solar directa.

• Não coloque este dispositivo junto a locais molhados ou com humidade. Não

derrame líquidos sobre o dispositivo.

• Por favor siga atentamente as instruções do manual / guia de instalação

rápida para conectar o dispositivo ao seu PC ou a qualquer outro dispositivo
electrónico. Atenção que qualquer tipo de ligação inválida pode originar risco

de choque eléctrico ou de incêndio.

• Não coloque este dispositivo numa superfície ou suporte instáveis.

User Manual

10

7 Overview

The SMC7904WBRA-N2 Router is an ADSL2+ Integrated Access Device. It
provides four 10/100Base-TX Ethernet interfaces at the user end. The Router
provides a high-speed ADSL broadband connection to the Internet or Intranet for
high-end users, such as net bars and office users. It provides high-performance
access to the Internet, with downstream speeds up to 24 Mbps.

The Router supports WLAN access. It complies with IEEE 802.11b/g and 802.11n
standards, and WEP, WPA, and WPA2 security specifications. The WLAN of the
Router supports a two-transmit, two-receive (2T2R) antenna configuration.

7.1 Packing List

 SMC7904WBRA-N2
 ADSL splitter
 Switching AC power adapter
 Ethernet cable (RJ-45)
 2 Telephone cables (RJ-11)
 Quality Warranty Card
 Quick Installation Guide (QIG)
 GPL Notice
 CD; includes User Manual and GPL source code

7.2 Application

 Home gateway
 SOHOs
 Small enterprises
 High data rate broadband sharing
 Audio and video streaming and transfer
 PC file and application sharing
 Network and online gaming

User Manual

11

7.3 Features

 User-friendly GUI for web configuration
 Several pre-configured popular games. Just enable the game support and

the port settings are automatically configured.

 Compatible with all standard Internet applications
 Industry-standard and interoperable DSL interface
 Simple web-based status page displays a snapshot of system configuration,

and links to the configuration pages

 Downloadable flash software updates
 Support for up to 8 permanent virtual circuits (PVCs)
 Support for up to 8 PPPoE sessions
 Support for RIP v1 and RIP v2
 WLAN with high-speed data transfer rates of up to 130 Mbps, compatible

with IEEE 802.11b/g/n, 2.4 GHz compliant equipment

 Optimized Linux 2.6 Operating System
 IP routing and bridging
 Asynchronous transfer mode (ATM) and digital subscriber line (DSL) support
 Point-to-point protocol (PPP)
 Network/port address translation (NAT/PAT)
 Quality of Service (QoS)
 Wireless LAN security: WPA, 802.1X, RADIUS client
 Universal plug-and-play (UPnP)
 File server for network attached storage (NAS) devices
 Print server
 Web filtering
 Management and control

- Web-based management (WBM)

- Command line interface (CLI)

- TR-069 WAN management protocol

 Remote update
 USB mass-storage, SAMBA and DLNA
 System statistics and monitoring
 DSL router is targeted at the following platforms: DSL modems, wireless

access points and bridge.

User Manual

12

7.4 Standards Compatibility and Compliance

 Support s application level gateway (ALG)
 ITU G.992.1 (G.dmt)
 ITU G.992.2 (G.lite)
 ITU G.994.1 (G.hs)
 ITU G.992.3 (ADSL2)
 ITU G.992.5 (ADSL2+)
 ANSI T1.413 Issue 2
 IEEE 802.3
 IEEE 802.3u
 IEEE 802.11b
 IEEE 802.11g
 IEEE 802.11n

8 Hardware Description and Installation

8.1 Hardware Description

8.1.1 Front Panel

Figure 1 Front Panel

The following table describes the indicators on the front panel.

Indicator

Color

Status

Description

Power

Green On

The device is powered on and operating
normally.

Red

On

The device has detected a self-test failure or
other malfunction.

Off The device is powered off.

DSL

Green

On DSL link has been established.
Slow Blink No DSL link detected.
Fast Blink DSL link detected.

Off The device is powered off.

User Manual

13

Indicator Color Status Description

Internet

Green

On

There is a connection to the Internet (PPP is

up).

Blink Data is being transmitted.

Red

On

Authentication has failed.

Off

No PPP connection or the PPP connection is
down.

LAN
1/2/3/4

Green

On

An Ethernet link is established.

Blink

Transmitting or receiving data over the Ethernet
link.

Off

No Ethernet link established.

WLAN

Green

On The WLAN is enabled.

Blink

Transmitting or receiving data over the WLAN.

Off The WLAN is disabled.

WPS

Green

On

A Wi-Fi Protected Setup connection has been

successfully established.

Blink

Wi-Fi Protected Setup is setting up a
connection.

Off

Wi-Fi Protected Setup is idle.

USB

Green On A USB device is connected.

Off

No USB device is connected.

User Manual

14

8.1.2 Rear Panel

Figure 2 Rear panel

The following table describes the interfaces and buttons on the rear panel.

Interface

Description

Line

RJ-11 port for connecting to the ADSL interface or a splitter through a

telephone cable.

WLAN WLAN switch for enabling or disabling the WLAN function.

Reset

Press the button for at least 3 seconds and then release it. System

restores the factory default settings.

WPS

Enables WPS PBC mode. When WPS is enabled, press this button
for the wireless router to start the negotiation of PBC mode.

LAN 4~1

RJ-45 ports for connecting the router to PCs or other network

devices.

USB

USB host port for connection to a USB device to support a specific
value-added application.

Power

For connecting the AC power adapter to supply 12 V DC, 1 A.

Power on/off switch, next to the power socket.

Warning:

Do not press the Reset button unless you want to clear the current settings. The

Reset button is in a small circular hole on the rear panel. If you want to restore the

default settings, press the Reset button for 3 seconds with a fine needle inserted into

the hole and then release the button. The system reboots and returns to the factory

defaults.

The power specification is 12V, 1A. If the power adapter does not match the

specification, it may damage the device.

User Manual

15

8.2 Hardware Installation

8.2.1 Choosing the Best Location for Wireless Operation

Many environmental factors may affect the effective wireless function of the DSL
Router. If this is the first time that you have set up a wireless network device, read the
following information:
The access point can be placed on a shelf or desktop, ideally you should be able to
see the LED indicators in the front, as you may need to view them for troubleshooting.
Designed to reach up to 100 meters indoors and up to 300 meters outdoors, the
wireless LAN lets you access your network from anywhere you want. However, the
numbers of walls, ceilings, or other objects that the wireless signals must pass
through limit signal range. Typical ranges vary depending on types of materials and
background radio frequency noise in your home or business.

8.2.2 Connecting the Router

Step1 Connect the Line interface of the Router to the MODEM interface of the

splitter through a telephone cable. Connect the phone to the PHONE
interface of the splitter through a telephone cable. Connect the incoming
line to the LINE interface of the splitter.

The splitter has three interfaces:

 LINE: Connect to a wall phone jack (RJ-11 jack).
 MODEM: Connect to the ADSL jack of the device.
 PHONE: Connect to a telephone set.

Step2 Connect the LAN interface of the Router to the network interface card

(NIC) of the computer through an Ethernet cable (MDI/MDIX).

Step3 Plug one end of the power adapter to the wall outlet and connect the

other end to the Power interface of the device.

Connection 1

Figure 3 displays the application diagram for the connection of the router, computer,
splitter and the telephone sets, when no telephone set is placed before the splitter.

User Manual

16

Figure 3 Connection diagram (Without connecting telephone sets before the splitter)

Connection 2

Figure 4 displays the connection when the splitter is installed close to the router.

Figure 4 Connection diagram (Connecting a telephone set before the splitter)

Note:

When connection 2 is used, the filter must be installed close to the telephone
cable. See Figure 4. Do not use the splitter to replace the filter.

Installing a telephone directly before the splitter may lead to failure of connection
between the device and the central office, or failure of Internet access, or slow
connection speed. If you really need to add a telephone set before the splitter, you
must add a microfilter before a telephone set. Do not connect several telephones
before the splitter or connect several telephones with the microfilter.

User Manual

17

9 PC Network Configuration and Login

9.1 PC Network Configuration

Each network interface on the PC should either be configured with a statically defined
IP address and DNS address, or be instructed to automatically obtain an IP address
using the network DHCP server. DSL router provides a DHCP server on its LAN and
it is recommended to configure your LAN to automatically obtain its IP address and
DNS server IP address.
The configuration principle is identical but should be carried out differently on each
operating system.
The following displays the TCP/IP Properties dialog box on Windows XP.

User Manual

18

Figure 5 IP and DNS configuration

TCP/IP configuration steps for Windows XP are as follows:

Step1 Choose Start > Control Panel > Network Connections.
Step2 Right-click the Ethernet connection icon and choose Properties.
Step3 On the General tab, select the Internet Protocol (TCP/IP) component

and click Properties.
Step4 The Internet Protocol (TCP/IP) Properties window appears.
Step5 Select the Obtain an IP address automatically radio button.

User Manual

19

Step6 Select the Obtain DNS server address automatically radio button.
Step7 Click OK to save the settings.

9.2 Logging In to the DSL Router

To log in to the DSL router, follow these steps:

Step1 Open a Web browser on your computer.
Step2 Enter http://192.168.2.1 (the default IP address of the DSL router) in the

address bar. The login page appears.

Step3 Enter the Login ID and the password. The default Login ID is admin with

default password smcadmin. It is recommended to change these default
values after logging in to the DSL router for the first time.

Step4 Click Login to log in to the Web page. Otherwise, please click Cancel to

exit the login page.

User Manual

20

10 Web-Based Management

This chapter describes how to use Web-based management of the DSL router,
which allows you to configure and control all of DSL router features and system
parameters through a user-friendly GUI.
After logging in to the DSL router successfully, the following page appears.

 Setup Wizard: Select this option to display the following page. For the

wizard configuration, refer to 5.1.1 Wizard Setup.

User Manual

21

 Advanced Setup: Select this option to display the following page. For

configuration details, refer to the following section.

User Manual

22

10.1 Start

Choose Start and the submenus of Start are shown as below:

10.1.1 Wizard Setup

Wizard helps you to fast and accurately configure Internet connection and other

important parameters. The following sections describe these various configuration
parameters.
Step1 Choose Wizard in the main page and the page as shown in the following

figure appears.

Step2 In the Getting Started page, click Next and the following page appears.

In this page, you can enable wireless, set the SSID, and enable or
disable hide access point.

User Manual

23

Step3 After proper setting wireless, click Next and the Times settings page

appears. In this page, you can automatically maintain the system time on
your ADSL router by synchronizing with a public time server over the
Internet.

User Manual

24

Step4 After proper setting time, click Next and the ADSL settings page

appears.

Select the country and ISP provider. Set the VPI and VCI. If you fail to find the
country and ISP from the drop-down lists, select Others.
 Protocol: You can select the protocol from the drop-down list.

– PPPoE/PPPoA: When you select the PPPoE or PPPoA

as the protocol, you need to set the correct user name and
password provided by your ISP.

– Static IPoE/IPoA: When you select the static IPoE or

IPoA as the protocol, you need to enter the IP address,

User Manual

25

subnet mask, default gateway and DNS provided by your
ISP.

 Encapsulation Mode: You can select the encapsulation mode from the

drop-down list.

 VPI (Virtual Path Identifier): The virtual path between two points in an ATM

network, and its valid value is from 0 to 255.

 VCI (Virtual Channel Identifier): The virtual channel between two points in

an ATM network, ranging from 32 to 65535 (1 to 31 are reserved for known
protocols).

Step5 After proper setting ADSL, click Next and the Summary page appears. In

this page, you can check whether the summary information matches the
information provided by your ISP. Click Back to review or modify settings.
Click Finish to apply current settings.

User Manual

26

10.1.2 Wireless

10.1.2.1 Basic Settings

Choose Start > Wireless > Basic to display the following page.