SMC Networks SBC-2800 series,SBC-2400 series,SBC-2600 series,KBC-2600 SERIES User Manual

SMC CORP

BRUSH CUTTER USER’S MANUAL

SMC CORP

No.8, Wu Ying S. Rd.,

Pu Xin, Chang Hwa,

51010, Taiwan

TEL : [phone]

FAX : [phone]

2011/09/01 PRINT IN TAIWAN

SBC-2800 SERIES
SBC-2600 SERIES
SBC-2400 SERIES

KBC-2600 SERIES

SHOULDER TYPE
SWIVEL FUCTION

KNAPSACK
BRUSH
CUTTER

Thank you very much for purchasing our brush cutter !

Our top priority is customer safety. Before use, please be sure to read this manual
which explains safety procedures, assembly of the machine and instructions for use, etc.
Please use the machine safely and efficiently at all times. If you have any questions, please
contact the store where you purchased our product.

＊BE SURE TO OBSERVE THE FOLLOWING

FOR SAFE USE THE BRUSH CUTTER !

＊BRUSH CUTTER / TRIMMER

IMPORTANT SAFETY INFORMATION

1.

GENERAL MATTERS

(1) The brush cutter is designed to cut weeds.

Never use it for any other purpose, such as cutting tree branches, etc.

(2) Wear clothes with tight fitting long sleeves and trousers

No loose sleeves or trouser bottoms) , a protective cap (safety helmet), gloves,

dust- proof glasses and safety shoes.
(3) Prepare a whistle, an axe, and a hatchet.
(4) Be sure to put the blade guard in the specified position.
(5) Do not use the machine when tired!

Under the influence of alcohol or after taking medication.
(6) Children, pregnant women or untrained personnel must not use the machine.
(7) Do not lend the brush cutter to people who are not properly trained

Or well - experienced with its operation.

(8) Do not use the machine during the night or in bad weather conditions.

2.

BRFORE OPERATION

(1) MACHINE INSPECTIONS:

1-1. Use the machine only after making sure that there are no abnormalities.

Check items: ・Missing or loose screws.

・Lubricant Oil, grease and fuel are in their proper locations.

・There are no fuel leaks.

1-2. Check the engine type, 2-cycle engine is used the mix ratio of fuel is

50 (gasoline) to 1 (oil). Mix fuel carefully, because an improper mixing ratio will result

in burning or excessive wear of the engine.
1-3. Check the engine type, 4-cycle engine is no need to mix gasoline & oil.
1-4. Make sure that the engine is cooled down before refueling.

Refuel the machine in a safe area.

1-5. Fuel is flammable. Never smoke when refueling. Never refuel near fire.

Be sure to keep the machine away from fire. If fuel spills whilst refueling,

thoroughly wipe it up before continuing.
1-6. Use the machine after making sure that there are no abnormalities

of the cutter mechanism: e. g ., The blade is mounted securely,

the teeth of the blade are properly set and the cutter is not damaged in any way.
1-7. Be sure to put the blade guard and the shoulder band on the machine.

(2) WORKING SITE INSPECTIONS:

1-1. Use the machine after making sure there are no cans,

wires or pebbles in the work area.

1-2. Specify an area within a 15m radius from the operator as a dangerous area.

Warn people by surrounding the area with a rope and putting up a notice.
Prevent people and pets from entering the area. If a person or a pet approaches
within a 15m distance, immediately stop the engine. If two people or more work
together with the machines, work 15m apart from each other.

(3) WORKING TIME: 1-1. Work 2 hours or less a day.

1-2. Fatigue is the biggest factor in accidents.

Take a 10-20 minute rest for every 30-40 minutes of work.

(4) STARTING THE ENGINE:

1-1. Check the area within a 15m radius before starting the engine.

Do not let the blade touch the ground, stones or branches !
1-2. Do not start the engine inside a building. When starting the engine, be sure to move

the engine 3m or more away from the refueling place.
1-3. Be careful not to breathe exhaust fumes.

3.

DERING OPERATION

(1) OPERATING:

1-1. Leave plenty of time for mowing. Do not use the machine when raining or after rain.

It is dangerous because the ground is slippery.
Be careful in slippery places i.e. snow or ice. Always secure a safe foothold.

1-2. Do not move the brush cutter with excessive force.

Work in a proper and balanced posture.

1-3. Follow the manufacturer’s recommended engine revolution speed.

Only change speed when a change is needed.

1-4. When there is any sign of danger, immediately stop the engine or move the brush cutter

away from the operator, i.c. remove the shoulder band.

1-5. When the cutter touches a hand object, such as a stone, immediately stop the engine

and make sure that there are no abnormalities on the blade surface.
If there is an abnormality, stop working and replace the blade.

1-6. When grass coils around the blade and the engine slows down,

be sure to turn off the engine before removing the grass.

1-7. Operate the blade by sweeping it from right to left.
1-8. Do not use the brush cutter for purposes other than mowing. Do not cut water or soil.
1-9. Be sure to use the brush cutter parts specified by the manufacturer.
1-10. Be sure to put the blade guard on the machine before working.

Never remove the blade guard, because it is dangerous to work without the guard.

1-11. When the engine revolves, the machine may move in a opposite direction due to torque.

Firmly grip the handle to counteract this.

1-12. When two or more people work together, decide on a signal, such as a whistle,

in advance. Always observe the signal. Keep 15m apart from each other.
1-13. Never talk with another person while working. If you need to take, stop the engine first.
1-14. Do not touch the spark plug cap or the high – voltage cable.

There is a possibility of receiving an electric shock.

1-15. To prevent burns, do not touch the engine or muffler during operation.

After stopping the engine wait until the engine has cooled down.
1-16. Be sure to stop the engine before moving to another work site,

Putting the brush cutter on the ground or stopping work.
Do not place the machine near flammable material, such as dead grass,
because the muffler is still hot after the engine stops and may ignite it.
1-16-1. To remove the machine in an emergency, press the joint on the shoulder band.
1-16-2. In an emergency, such as an injury, let others know by shouting in a loud voice.
1-16-3. Be sure to stop the engine and put the blade cover on the machine
after stopping mowing or before moving it to another site.

1-17. If the bush cutter experiences any trouble, refer to the troubleshooting instructions

in the manual. If the manual instructions do not work, consult the store where you
bought the machine.

CAUTION:

An uncontrolled brush cutter can cause serious injury or death of not only
the operator but also a third party. Use the machine very carefully.