SMC Networks MCUSBH7 User Manual

EZ Connect™ USB 2.0 7-Port Hub

Quick Installation Guide/User's ManualQuick Installation Guide/User's ManualQuick Installation Guide/User's ManualQuick Installation Guide/User's ManualQuick Installation Guide/User's Manual

SMCUSBH7SMCUSBH7

SMCUSBH7

EZ Connect™ USB 2.0 7-Port Hub

Quick Installation Guide/User's Manual

From U.S.A. and Canada (24 hours a day, 7 days a week)

(800) SMC-4-YOU Phn: (949) 679-8000 Fax: (949) 679-1481

From Europe : Contact details can be found on www.smc.com

INTERNET E-mail addresses:

techsupport@smc.com

Driver updates:

http://www.smc.com/index.cfm?action= techsupport

If you are looking for further contact information, please visit www.smc.com

38 Tesla Irvine, CA 92618 Phone: (949) 679-8000

Model Number:

SMCUSBH7

Hardware Installation

Using The EZ 3Click Wizard

EZ Installation CD

SafetySafety

Specification

Always read the safety instructions carefully

• Keep this user's manual for future reference

• Keep this equipment away from humidity

• Lay this equipment on a reliable flat surface before setting it up

• If any of the following situation arises, have the equipment checked by a service technician:

• The equipment has been exposed to moisture

• The equipment has been dropped and damaged

• The equipment has obvious sign of breakage

• The equipment has not working well or you cannot get it work according to this user's manual.

1. Compliant with both Universal Serial Bus Specification Revision 2.0 (Data Rate 1.5/ 12/ 480 Mbps) and Revision 1.1 specification.

2. Bus-power and self-power mode used.

3. Includes 1 upstream and 7 downstream USB ports.

4. 1 LED indicator for power-on LED.

5. 7 LED indicators for downstream port status.

6. Plug and play.

7. Over-current detection and protection.

8. Connects up to 127 USB devices.

9. OS driver support: Win98SE/Win ME /Win 2000/Win XP & Mac 10.1 and up.

10. Plug and play.

Supported O.S.

Functions USB 2.0 7-Port HUB

O.S. USB 1.1 USB 2.0

Win 98se Built in OS Follow USB 2.0 system driver

Win ME Built in OS Follow USB 2.0 system driver

Win 2000 Built in OS Follow USB 2.0 system driver

Win XP Built in OS Follow USB 2.0 system driver

Mac Built in OS Follow USB 2.0 system driver

NOTE:

1. If you connect USB 2.0 devices from this hub to a PC or Mac OS that does

not support USB 2.0, please install USB 2.0 drivers provided by the USB 2.0 device manufacturer

2.This hub doesn't support Hi-Power device at bus power mode, please add

an adapter as necessary.

Using The EZ 3Click Wizard

Using the USB Hub Stand

FeaturesFeatures

Using The EZ 3Click Wizard

SpecificationSpecification

Ports

Seven downstream port and one upstream port

Compliance

FCC regulations for home or office use CE emissions

Power

Self Power: 5V 4.0A Adapter: Input: 100~240v 50Hz-60Hz Output: 5V 4.0A

Dimensions

3.94” (L) x 2.36” (W) x .95” (H) 10cm (L) x 6cm (W) x 2.5cm (H)

Weight

3.81oz /108g

Storage Temperature

-10~80 C

Working Temperature

0~40 C

Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice.

SMC Networks, Inc. 38 Tesla Irvine, CA 92618

is a trademark of SMC Networks. Other product and company names are trademarks or registered trademarks of their respective holders.

SMCUSBH7

Thank your for purchasing SMCUSBH7 EZ ConnectTMUSB 2.0 7-Port Hub. SMCUSBH7 is a plug and play full featured external Universal Serial Bus Hub. It allows your computer to connect to other USB interfaces such as joysticks, modem, digital speakers, printers, digital cameras, monitors, keyboards, mouse, storage devices, and many other USB devices. Moreover, this unique hub is designed for space-saving functions.

1. Plug the included AC power adapter into the power jack at the rear of the USB 7 port hub and an electrical outlet.

2.Connect to computer by using included USB cable. Connect A type connector to the computer and connect B type to the USB hub's upstream port (B type connection)

3.Connects USB devices or hubs to the 7 port hub's downstream 1 ~ 7 ports (A type).

You can place the SMCUSBH7 either vertically or horizontally with the stand which is provided. You can also fasten it to a surface using screws (screws not provided). Additionally, the SMCUSBH7 hubs can be stacked together.

A. Vertically

Push the USB Hub from A all the way down until you meet the stopper. (Refer to Figure 1)

Push the USB Hub all the way in until you hear a click. There is a track on both the top and the bottom so you can put it either way depending on your needs. (Refer to Figure 2)

B. Horizontally

Have the hole of the stand facing up and push the clipper to the hole of the hub between the stand-off. Make sure you here a click. You could push the stand in from the left or the right. (Refer to Figure 3)

C. Fastening to a surface

Secure the stand to the desk and fasten the screws on both side of the stand. (Package does not include screws for fastening the hub to a surface)

Slide the USB Hub into the stand, the same way as the vertically and horizontally placed hubs. (Refer to Figure 4)

D. Stacking

USB 7-port hubs also can be stacked together.

Slide the hubs in a stack. Face them in a same direction. (Refer to Figure 5)

Slide the hubs inward until you hear a click.

Do not stack hubs in opposite directions.

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Power LED (Red)

Status LED (Green

Upstream Port

(B type connector)

Downstream Ports (A type connector)

Power Jack