SMC Networks IZD10-*10 Series, IZD10-110, IZD10-510 Operation Manual

Doc. No.IZ*-OMK0023-A

IZD10-*10

OPERATION MANUAL

PRODUCT NAME

MODEL:

:

Electrostatic Sensor

○Read this operation manual carefully to

understand before installa t io n a nd operat ion.

○Pa y extr a at t ention on the cla use concerning the

safety.

1

INDEX

1. Safety Instruction ................................................................................................................................ 2

2. Outline ................................................................................................................................................. 6

3. How to Order ....................................................................................................................................... 7

4. Specification ........................................................................................................................................ 7

5. Mounting.............................................................................................................................................. 7

5-1. Electrostatic sensor installation ................................................................................................... 7

5-1-1. Sensor head installation ....................................................................................................... 7

5-1-2. Installation of the sensor amplifier ........................................................................................ 8

5-2. Circuitry and wiring chart ............................................................................................................. 9

6. Performance ...................................................................................................................................... 10

6-1. Output signal .............................................................................................................................. 10

6-2. Detection range........................................................................................................................... 11

6-3. Cautions on installation ............................................................................................................... 11

6-4. Timing chart ............................................................................................................................... 12

7. Exterior dimensions........................................................................................................................... 12

2

1. Safety Instruction

! ! !

!

These safet y ins tr uc ti o ns ar e i nten ded to prevent hazardous si t uati ons and/or equipm ent damage.

These instr uctions indi cate the lev el of potential hazard by l abeling "Caution", "Warning", and

"Danger". To ensure safety, be sure to observe ISO4414 and other safety precautions.

Caution ：Indicates a p otentially haz ardous situati on, which, i f not avoided, may result i n

minor or moderate injury or damage to the equipment.

Warning ：Indi cates a p otentiall y hazar dous si tuation, whic h, if not avoi ded, coul d result in

death or serious injury.

Danger ：Indicates an imm inently hazardous situation, which, i f not av oided, wi ll result in

death or serious injury.

Warning

(1) The compatibility of pneu matic equipment is the responsibility of the pe rson who designs the

pneumatic system or decides its specifications.

Since the pr oducts sp eci fied her e are used i n v arious op erati ng condit ions, t heir c om patibil ity wi th
the specific pneumatic system must be based on specifications or after analysis and/or tests to meet
your specific requirements.

(2)

Only trained personnel should operate pneumatically operated machinery and equipment.

Mounting of the s ensor a nd m aint enance s hall b e p erf orm ed by per son w ith adeq uate know l edge
and experience.

(3)

Do not service machinery/equipment or attempt to remove components until safety is confir med.

1) Inspection and maintenance of machinery/equipment should only be performed after
confirmation of safe locked out control positions.

2) W hen eq uipment is to be rem ov ed, c onf i rm the s af ety pr oc ess as m ent i oned ab ove. Cut t he
pressure supply for the equipment and exhaust all residual compressed air in the system.

3) Befor e machinery/eq uipment is r e-started, take meas ures to prev ent quick extensi ons of the
cylinder piston rod etc.

(2)

Contact SMC if the product is to be used in any of the follow i ng condi t i ons .

1) Conditions and environments beyond the given specifications or if product is used outdoors.

2) Installation on equipment in conjunction with atomic energy, railway, air navigation, vehicles,

medical equipment, food and beverage, recreation equipment, emergency stop circuits, press
applications or safety equipment.

3) An application which has the possibility of having negative effects on people, property, or
animals requiring special safety analysis.

3

Selection

Mounting

!

!

!

Warning

(1) This product is intended to be used for general FA equipment.

Please consult SMC for other application (esp. application described on (4) on previous page).

(2) Keep specified voltage and temperature range to avoid malfunction, damage, electric shock and fire.

(3) This product is not explosion proof.

Don’t use environment where explosion by particle is possible or containing flammable/explosive gas.

Caution

(1) This product is not cleaned. To bring it into a clean room, flushing for the product must be done for

several minutes to ensure having necessary cleanness.

(2) Do not flush the detect hole with high pressure.

High pressure flushing may deform the detection mechanism which disables correct detection of
charged potential, and lead to cause failure.

Warning

(1) Keep adequate space for maintenance and wiri ng when mounting.

Joint part with external component shall have space for attachment/removal of the cable after
installation.
Don’t bend t he cab le m ore t han m in. bend r adius s o that t he rood of c abl e entri es, w hic h are f or the
connect p art for external comp onent and th e senso r head, and the ampl ifier , do not receiv e exces s
stress. Fix the cable as close to the products as possible to avoid bending with acute angle.
Stressful wiring leads to cause malfunction, disconnection, and fire.
Min. bend radius : Sensor cable - - - - 25mm

(Note : Bend radius allowable for fixed wiring at 20
applied to the entry of the cable at the joint part with external part or the sensor head, and the entry of
amplifier cable even if the bend radius is larger than min. bend radius. )

(2) Mount to the flat surface

Mounting on uneven surface will apply excess force to the case which lead to caus e damage or
failure.

(3) Do not drop nor hit

Do not drop, hit nor apply impact to avoid malfunction and accident.

(4) Do not used where noise(electromagnetic wave, surge, etc.) generated to avoid malfunction,

deterioration and damage of internal element. Prepare solution against the noise and keep lines
apart.

(5) Keep tightening torque. (Tightening torque : See “5-1. Installation of electrostatic sensor”.)

Tightening with exc essive t orque lead t o damag e of set screw s and set brack et. W ith inadeq uate
torque, joint screws will be loosened.

(6) Do not contact the sensor head detect surface w ith metal tools to avoid disabling functions and

performances on the spec. , and failure and accident.

o

C. If bent under 20oC, excess stress will be