SMC Networks Inno Bonding Range User Manual

Inno Adhesion Promoter
AcceleratesthecuringofMegaBondPUandMegaBond PUSpeed.
IAP
TECHNICAL DATA
Appearance:Aerosol Colour:transparent/colourless Density:0.86kg/L(+/-0,04,at20°C(liquidstage) Propellant:G.P.L.(propane/butane) Flammability:Extremelyflammable
TECHNICAL DATA SHEET
USER INSTRUCTIONS
-NotsuitableforpurePEandPS.
-Shakecanwellbeforeuse.
-Thesurfacestobecoatedmustbefreeofoil,grease,wax,humidity,dirt,separatingandcaringagents.
-Applyathin,evenlayerapproximately25cmfromthesurfaceoftheplastic.Leavetodry.Anadditionalapplicationis recommended.
-Canbeover-lacqueredwithallcurrentlacquersystems.
APPLICATION
-Aftersanding(granulation:120)andremovingdust,spraytheplasticprimerthinlyontotheplasticsurface.
-Allowapprox.10to15min.forevaporation.
-Afterashortdryingperiod,asecondcoatinglayerisrecommended.
-AlsosuitableasaprimerforInnoBONDtoincreaseadhesiontodifferentsurfaces/materials.
Allinformation,includingillustrations,isbelievedtobereliable.Users,however,shouldindependentlyevaluatethesuitabilityofeachproductortheirapplication.Innosystemsmakesnowarrantiesastothe
accuracyofcompletenessoftheinformation,anddisclaimsanyliabilityregardingitsuse.Innosystem’sonlyobligationsarethoseinthestandardtermsandconditionsofSaleforthisproduct,andinnocase
Unit17a,LoughbookIndustrialEstate,Bessbrook,Newry,CoDown,BT357EE,UnitedKingdom
t:+44 (0) 28 30 830 006f:+44 (0) 28 30 837 006e:sales@innosystems.co.ukw:www.innosystems.co.uk
willInnosystemsbeliableforanyIncidental,indirectorconsequentialdamagesarisingfromthesale,resale,useormisuseoftheproduct.
1 of 1
Loading...