SMC Networks FXST, SMC-FXST Quick Start Manual
V2.0
Quick Start Guide
Installationskurzanleitung
Guide d'installation
Media Converter
Medienkonverter
Convertisseur de média
SMC-FXST
0100-03807-3204
10/100Base-TX to 100Base-FX
Media Converter
English 2 - 5
Deutsch 6 - 9
Francais 10 -13
Copyright & Notes 14
Package Contents
•One media converter unit
•One AC adapter
• Self-adhesive pads (4 pieces)
•User’s Manual CD-ROM
•Warranty Card
(unit with ST connector shown below)
adapter
NOTE: Please visit us at www.smc-europe.com to register your
product and become eligible for various support services and
product information up-date!
English
Media Converter
1 2
English
Setting-Up
1. Installation
There are two options:
• Wall-mount - Insert two screws into the wall-mount hole fixtures
• Desktop - Affix the 4 self-adhesive pads as indicated.
Under Panel of Housing Unit
2. Setting Half/Full-duplex
Toggle the DIP switch (located on rear panel) to set unit to fullduplex or half-duplex mode as necessary.
• FDX - Enables full-duplex mode
• HDX - Enables half-duplex mode
NOTE: It is possible to change between duplex modes without
disconnecting power or cables.
View of DIP Switch on Rear Panel
English
English
Features
• Complies with IEEE 802.3, IEEE 802.3u and 10/100BASE-TX
standards
• RJ-45 port auto-MDI detection and setting
• DIP switch enabled half/full-duplex mode
• Status LEDs for quick and easy network monitoring
• Extended distances up to 2km (6,600 ft) for multi-mode fiber
• External power supply
• FCC Class A & CE approved
General Guide
Self-adhesive
pads
Self-adhesive
pads
Holes for wall-mounting
3 4
Front Panel View
Rear Panel View
Fiber optic port
Status LED
indicators
UTP port
(RJ-45)
10/100BASE-TX to 100BASE-FX Media Converter
Loading...