SMC Networks FGD series, FGDEA, FGDCA, FGDTA, FGDCB Operating Manual

1/13

FGX-OM-L005-C

Product Name

Industrial Filter

Model / Series / Product Number

FGD series

2/13

FGX-OM-L005-C

Contents

Safety Instructions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・3

Parts Descriptions and Functions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・6

Product Specifications ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・7

How to Order ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・7

Dimensions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・8

Installation and Piping ・・・・・・・・・・・・・・・・・・・・・・・・・ ・・・・・・・9

Maintenance ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・9

Maintenance parts ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・10

These safety instructions are intended to prevent

These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.”

They are all important notes for safety and must be followed in addition to International Standards

(ISO/IEC)

*1) ISO 4414:

General requirements)

1. The compatibility of the product is the responsibility of the person who designs the equipment or

decides its specifications.

Since the product specified here is used under various operating conditions, its compatibility with specific

equipment must be decided by the person who designs the equipment or decides its specifications based on

necessary analysis and test results.

The e

has determined its compatibility with the product.

This person should also continuously review all specifications of the product referring to its latest

information, with a view to giving due consideration to any possibility of equipment failure when configuring the

equipment.

2. Only personnel with appropriate training should operate machinery and equipment.

The product specified here may become

The assembly, operation and maintenance of machines or equipment including our products must be performed

by an operator who is appropriately trained and experienced.

3. Do not service or attempt to remove product and machine

1.The inspection and maintenance of machinery/equipment should only be performed after measures to prevent

2.When the product is to be removed, confirm th

and the power from any appropriate source is cut, and read and understand the specific product precautions of

all relevant products carefully.

3.Before machinery/equipment is restarted, take measu

4. Contact SMC beforehand and take special consideration of safety measures if the product is to be

used in any of the following conditions.

1.Conditions and environments outside of the given specificati

direct sunlight.

2.Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping, vehicles,

military, medical treatment, combustion and recreation, or equipment in conta

emergency stop circuits, clutch and brake circuits in press applications, safety equipment or other applications

unsuitable for the standard specifications described in the product catalog.

3. An application which could have

analysis.

4.Use in an interlock circuit, which requires the provision of double interlock for possible failure by using a

*1)

, and other safety regulations.

Pneumatic fluid power

ISO 4413: Hydraulic fluid power

IEC 60204-

1: Safety of machinery

ISO 10218-

1992: Manipulating industrial robots

etc

Caution

Warning

Danger

xpected performance and safety assurance of the equipment will be the responsibility of the person who

falling or runaway of the driven objects have been confirmed.

mechanical protective function, and periodical checks to con

Industrial Filter

Safety Instructions

Caution

moderate injury.

Warning

death or serious injury.

Danger

indicates a hazard with a high level of risk which, if not avoided, will resulting death or

serious injury.

--

General rules relating to systems

--

General rules relating to systems

--

Electri

indicates a hazard with a low level of risk which, if not avoided, could result in minor or

indicates a hazard with a medium level of risk which, if not avoided, could result in

cal equipment of machines

-

Safety

Warning

unsafe if handled incorrectly.

negative effects on people, property, or animals requiring special safety

hazardous situations and/or equipment damage.

at the safety measures as mentioned above are implemented

res to prevent unexpected operation and malfunction.

(Part

1:General requirements) General requirements)

ry/equipment until safety is confirmed.

ons, or use outdoors or in a place exposed to

firm proper operation.

ct with food and beverages,

FGX

3

-OM-

L005

catalog

/13

-C

The product is provided for use in manufacturing

Limited warranty and Disclaimer/Compliance Requirements

The

Requirements”.

Read and accept them before using the pro

Limited warranty and Disclaimer

1.The warranty period of the product is 1 year in service or 1.5 years after the product is delivered,

consult your nearest sales branch.

2. For any failure or damage reported within the warranty period which is clearly our responsibility, a

replacement product or necessary parts will be provided.

incurred due to the failure of the product.

3. Prior to using SMC products, please read and understand the warranty terms and disclaimers

noted in the specified catalog for the particular products.

Compliance Requirements

1. The use of SMC products with production equipment for the manufacture of weapons of mass

destruction(WMD) or any other

2. The exports of SMC products or technology from one country to another

relevant security laws and regulation of the countries involved in the transaction. Prior to the

shipment of a SMC product to another country, assure that all local rules governing that export are

known and followed.

3 Check the law for

determine whether or not the product can be used.

4 This product does not correspond to regulations or standards for pressure vessel of any country

or region.

The product herein described is basically provided for peaceful use in manufacturing industries.

If considering using the product in other industries, consult SMC beforehand and exchange specifications

or a contract if necessary.

If anything

product used is subject to the following “Limited warranty and Disclaimer” and “Compliance

whichever is first.

Also, the product may have specified durability, running distan

This limited warranty applies only

Industrial Filter

Safety Instructions

is unclear, contact your nearest sales branch.

pressure vessels or operating fluids specified in each country in advance and

weapon is strictly prohibited.

duct.

to our product independently, and not to any other damage

Caution

industries.

ce or

replacement parts. Please

FGX

are governed by the

4

-OM-

L005

/13

-C