SMC Networks HPAV-ETH2 - annexe 1, EZ Connect Powerline SMCHPAV-ETH2 User Manual

USER GUIDE

SMCHPAV-ETH2

EZ Connect Powerline™
200Mbps HomePlug AV Adapter

Copyright

Information furnished by SMC Networks, Inc. (SMC) is believed to
be accurate and reliable. However, no responsibility is assumed by
SMC for its use, nor for any infringements of patents or other rights
of third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of SMC.
SMC reserves the right to change specifications at any time without
notice.

Copyright © 2010 by

SMC Networks, Inc.

20 Mason

Irvine, CA 92618

Europe:

SMC Networks Spain S.L.

C/Fructuós Gelabert 6-8, 2º, 2ª

Edificio Conata II

08970 Sant Joan Despí

Barcelona, Spain

All rights reserved. Printed in China

Trademarks:

SMC is a registered trademark; and EZ Connect Powerline is a
trademark of SMC Networks, Inc. Other product and company
names are trademarks or registered trademarks of their respective
holders.

Warranty and

Product Registration

To register SMC products and to review the detailed warranty

statement, please check www.smc.com for the warranty terms in your

country/region.

SMC Networks, Inc.

20 Mason

Irvine, CA 92618

Compliances

EC Declaration of Conformity

SMC contact for these products in Europe is:

SMC Networks Spain, S.L.

Edificio Conata II,

Fructuós Gelabert 6-8 2º 2ª

08970 Sant Joan Despí, Barcolona,Spain

This product indicates compliance with the Essential Requirements of
the EMC Directive (2004/108/EC) and the LVD Directive
(2006/95/EC) of the European Union. This equipment meets the
following conformance standards.

EN 60950-1: 2006
EN 61000-3-2: 2006
EN 61000-3-3 : 1995+A1:2001+A2:2005
EN 55024: 1998+A1:2001+A2:2003
EN 55022: 1998+A1:2000+A2:2003

The official CE certificate of conformity can be downloaded by
selecting the relevant model/ part number from www.smc.com ->
support -> download"

Contents

1 Introduction ................................................................................................ 1

1.1 Minimum System Requirements ...................................................... 1

1.2 Package List..................................................................................... 1

2 Safety Cautions ......................................................................................... 2

3 Hardware Overview ................................................................................... 3

3.1 Ethernet Interface............................................................................. 3

3.2 Buttons ............................................................................................. 3

3.3 LEDs................................................................................................. 3

4 Installing the Configuration Utility for Windows.......................................... 5

5 Working with the Configuration Utility for Windows ................................... 8

5.1 Main Tab .......................................................................................... 8

5.2 Privacy Tab .................................................................................... 12

5.3 Diagnostics Tab.............................................................................. 14

5.4 About Tab....................................................................................... 16

6 SYNC button Usage ................................................................................ 17

6.1 Creating a private network ............................................................. 17

6.2 Joining a Network........................................................................... 18

6.3 Leaving a Network.......................................................................... 19

Appendix A Specifications ................................................................... 21

Appendix B Acronyms and Abbreviations ........................................... 22

Appendix C About QoS........................................................................ 23

1

1 Introduction

Thank you for purchasing an SMC product. The SMCHPAV-ETH2 is a fast

200Mbps* Powerline HomePlug AV Ethernet Adapter which allows you to

connect computers, or Ethernet-enabled devices in your home or office and to

share an Internet connections through the in-house electrical wiring .

*200Mbps—is the physical data rate. Actual data throughput may be lower.

1.1 Minimum System Requirements

For Configuration Utility, computer with

- 200MHz above CPU with 128MB RAM

- 20MB free disk space

- 10/100Mbps Ethernet Adapter with RJ-45 connector

- Windows 7, Vista, XP (with SP2) or 2000 (with SP4)

For Hardware Installation

- At least 2 HomePlug AV devices

- Available power outlet

- Available Ethernet port with RJ-45 connector on each computer or

networking device

1.2 Package List

z 1 SMCHPAV-ETH2 HomePlug AV Ethernet Adapter

z 1 CD-ROM with software utility and user manual

z 1 RJ-45 Ethernet cable

z 1 Quick Installation Guide

z 1 Warranty Information Card

2

2 Safety Cautions

This device is used for connection to the AC electrical wiring. In order to use the

device correctly and safely please read the instructions before using the device.

For installation instructions, please refer to the installation section of this user

guide.

z Follow all the warnings and instructions marked on the product.

z Before cleaning the device, unplug it from the wall outlet. Use a dry cloth

for cleaning. Do not use liquid or aerosol cleaners.

z Do not place the device near water.

z Do not place the device near or over a radiator or heat register.

z Do not use an extension cord between the device and the power outlet.

z Only professional technicians should service the device. Opening or

removing covers may result in exposure to dangerous voltage points or

other risks.

z Unplug the device from the power outlet and refer to professional service

personnel for the following conditions:

– If liquid has been spilled into the product.

– If the device has been exposed to rain or water.

– If the device does not operate normally when following the operation

instructions.

– If the device shows a significant change in performance.

3

3 Hardware Overview

3.1 Ethernet Interface

Use one end of the network cable included in the box to connect to the Ethernet

port (RJ-45) of the SMCHPAV-ETH2. Use the other end of the cable to connect

to the Ethernet port (RJ-45) of a computer or any other Ethernet-enabled

networking device.

3.2 Buttons

Figure 3-1 Side panel

Reset: Restore the factory default settings.

Sync: Activate network security. Refer to chapter 6 for more information.

3.3 LEDs

As shown in Figure 3-2, there are 3 LEDs on the front panel to indicate the status

of the adapter: