SMC Networks EZ Connect Antenna Ceiling Box User Manual
EZ Connect 2.4GHz High Gain Antenna Ceiling Box Kit Installation Instruction
POE Remote Unit
POE Remote UnitPOE Remote Unit
Amplifier
Amplifier
AmplifierAmplifierAmplifier
Non-Power Over Ethernet Power to Radio
Access Point
Access Point
Access PointAccess Point
Amplifier
AmplifierAmplifier
Antenna (thick black) cable
POE Remote Unit
POE Remote UnitPOE Remote Unit
Access Point
Access PointAccess Point
SMCANT-CEILINGBOX
EZ Connect
Installation / User Guide
TM
2.4GHz High Gain Antenna Ceiling Box Kit
Amplifier
AmplifierAmplifier
Ethernet (CAT5) Cable
POE Remote Unit
POE Remote UnitPOE Remote Unit
Access Point
Access PointAccess Point
Component List:
1. (1) Ceiling Box Chassis (top)
2. (1) Ceiling Box Chassis (bottom)
3. (1) 5 dBi Omni Directional Circular Polarized Antenna (Mounted)
4. (2) Mounting Arms
5. (1) 1 Watt Amplifier (SMCAMP-1000)
6. (1) POE Remote Unit
7. (1) 12” Antenna Cable
8. (1) 12” Non POE Ethernet Cable
9. (2) 12” POE Ethernet Cable
10. (4) Mounting Screws
11. (1) POE Injector (SMCAMP-INJ)
12. (1) Power Supply, 24 V ,2.5 Amp
Please register this product and upgrade the product warranty at www.smc.com.
EZ Connect 2.4GHz High Gain Antenna Ceiling Box Kit Installation Instruction
SMCANT-CEILINGBOX Ceiling Mounted Wireless Solution
will come to you fully configured and wired for you to add
your own radio, e.g. SMC2482W. Simply remove the top of
the box by removing the 6 screws on the sides.Be careful
removing the lid, as the top and bottom have connecting
cables.
Using supplied velcro,
attach your radio to the
POE Remote Unit
POE Remote Unit
bottom (silver) of the box.
POE Remote UnitPOE Remote Unit
Make sure the connectors
Amplifier
Amplifier
are facing the center of the
AmplifierAmplifier
box.
Access Point
Access Point
Access PointAccess Point
Using the supplied ethernet
cable, attach the ethernet input
to your radio with the ethernet
output from the amplifier.
POE Remote Unit
POE Remote UnitPOE Remote Unit
Amplifier
AmplifierAmplifier
Access Point
Access PointAccess Point
POE Remote Unit
POE Remote UnitPOE Remote Unit
Amplifier
AmplifierAmplifier
Access Point
Access PointAccess Point
Attach the antenna cable to
your radio. The other end will
need to be attached to the
amplifier.
Place the Ceiling box with
mounting arms above a ceiling tile. Make sure to follow
local building codes, and
attach a safety chain to secure the box.
Attach an Ethernet connection. Make sure that the
Ethernet connection has
Power Over Ethernet (POE)
applied. (See 9 below)
Re-attach the top of the
box by replacing the 6
screws on the outside
edge.
Attach the box to the
mounting arms using the
supplied 4 machine screws.
Amplifier
AmplifierAmplifier
POE Remote Unit
POE Remote UnitPOE Remote Unit
Access Point
Access PointAccess Point
If your radio is Power over
Ethernet, skip this step.
Using the permenently
attached power cable on the
POE Remote unit, plug in
power to your radio.
POE Injector
POE Injector
• Install Power Supply, 24 V ,2.5 Amp(1)
• Connect Category 5 cable input (3)
• Connect Category 5 cable to ceiling box (2)
Loading...