SMC Networks EZ6516TX - annexe 1, EZ Switch SMC-EZ6516TX User Manual

38 Tesla
Irvine, CA 92618
Phone: [phone]

EZ Switch 10/100
User Guide

From SMC’s EZ line of low-cost workgroup LAN solutions

July 2003

Pub. # 150000006200H R01

Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable.
However, no responsibility is assumed by SMC for its use, nor for any infringements of
patents or other rights of third parties which may result from its use. No license is granted by
implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to
change specifications at any time without notice.

SMC Networks, Inc.

38 Tesla

Irvine, CA 92618.

All rights reserved. Printed in Taiwan

Trademarks:

SMC is a registered trademark; and EZ Switch is a trademark of SMC Networks, Inc. Other
product and company names are trademarks or registered trademarks of their respective
holders.

i

L

IMITED

W

ARRANTY

Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be
free from defects in workmanship and materials, under normal use and service, for the
applicable warranty term. All SMC products carry a standard 90-day limited warranty from
the date of purchase from SMC or its Authorized Reseller. SMC may, at its own discretion,
repair or replace any product not operating as warranted with a similar or functionally
equivalent product, during the applicable warranty term. SMC will endeavor to repair or
replace any product returned under warranty within 30 days of receipt of the product.

The standard limited warranty can be upgraded to a Limited Lifetime* warranty by registering
new products within 30 days of purchase from SMC or its Authorized Reseller. Registration
can be accomplished via the enclosed product registration card or online via the SMC Web
site. Failure to register will not affect the standard limited warranty. The Limited Lifetime
warranty covers a product during the Life of that Product, which is defined as the period of
time during which the product is an “Active” SMC product. A product is considered to be
“Active” while it is listed on the current SMC price list. As new technologies emerge, older
technologies become obsolete and SMC will, at its discretion, replace an older product in its
product line with one that incorporates these newer technologies. At that point, the obsolete
product is discontinued and is no longer an “Active” SMC product. A list of discontinued
products with their respective dates of discontinuance can be found at:
http://www.smc.com/index.cfm?action=customer_service_warranty.

All products that are replaced become the property of SMC. Replacement products may be
either new or reconditioned. Any replaced or repaired product carries either a 30-day limited
warranty or the remainder of the initial warranty, whichever is longer. SMC is not responsible
for any custom software or firmware, configuration information, or memory data of
Customer contained in, stored on, or integrated with any products returned to SMC pursuant
to any warranty. Products returned to SMC should have any customer-installed accessory or
add-on components, such as expansion modules, removed prior to returning the product for
replacement. SMC is not responsible for these items if they are returned with the product.

Customers must contact SMC for a Return Material Authorization number prior to returning
any product to SMC. Proof of purchase may be required. Any product returned to SMC
without a valid Return Material Authorization (RMA) number clearly marked on the outside
of the package will be returned to customer at customer’s expense. For warranty claims within
North America, please call our toll-free customer support number at [phone].
Customers are responsible for all shipping charges from their facility to SMC. SMC is
responsible for return shipping charges from SMC to customer.

L

IMITED WARRANTY

ii

WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS
WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR
REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE
FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN
LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED,
EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE,
INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. SMC NEITHER ASSUMES NOR
AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER
LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE OR USE OF ITS PRODUCTS. SMC SHALL NOT BE LIABLE
UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THE
ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY
CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER
INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR, OR
ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY
ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.

LIMITATION OF LIABILITY: IN NO EVENT, WHETHER BASED IN CONTRACT
OR TORT (INCLUDING NEGLIGENCE), SHALL SMC BE LIABLE FOR
INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE
DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE, LOSS OF BUSINESS, OR
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE
SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR
INTERRUPTION OF ITS PRODUCTS, EVEN IF SMC OR ITS AUTHORIZED
RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES
OR THE LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
CONSUMER PRODUCTS, SO THE ABOVE LIMITATIONS AND EXCLUSIONS
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, WHICH MAY VARY FROM STATE TO STATE. NOTHING IN THIS
WARRANTY SHALL BE TAKEN TO AFFECT YOUR STATUTORY RIGHTS.

* SMC will provide warranty service for one year following discontinuance from the active
SMC price list. Under the limited lifetime warranty, internal and external power supplies, fans,
and cables are covered by a standard one-year warranty from date of purchase.

SMC Networks, Inc.

38 Tesla

Irvine, CA 92618

iii

C

OMPLIANCES

FCC - Class B

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with instructions, may
cause harmful interference to radio communications. However, there is no guarantee that the inter­ference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected

• Consult the dealer or an experienced radio/TV technician for help

EC Conformance Declaration - Class B

SMC contact for these products in Europe is:

SMC Networks Europe,
Edificio Conata II,
Calle Fructuós Gelabert 6-8, 2

o

, 4a,
08970 - Sant Joan Despí,
Barcelona, Spain.

This information technology equipment complies with the requirements of the Council
Directive 89/336/EEC on the Approximation of the laws of the Member States relating to
Electromagnetic Compatibility and 73/23/EEC for electrical equipment used within certain
voltage limits and the Amendment Directive 93/68/EEC. For the evaluation of the
compliance with these Directives, the following standards were applied:

RFI Emission: • Limit class B according to EN 55022:1998, IEC 60601-1-2 (EMC,

medical)

• Limit class A for harmonic current emission according to
EN 61000-3-2/1995

• Limitation of voltage fluctuation and flicker in low-voltage supply system
according to EN 61000-3-3/1995

Immunity: • Product family standard according to EN 55024:1998

• Electrostatic Discharge according to EN 61000-4-2:1995
(Contact Discharge: ±4 kV, Air Discharge: ±8 kV)

• Radio-frequency electromagnetic field according to EN 61000-4-3:1996
(80 - 1000 MHz with 1 kHz AM 80% Modulation: 3 V/m)

C

OMPLIANCES

iv

Industry Canada - Class B

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus,”
ICES-003 of the Department of Communications.

Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils
numériques de Classe B prescrites dans la norme sur le matériel brouilleur: “Appareils
Numériques,” NMB-003 édictée par le ministère des Communications.

Japan VCCI Class B

Safety Compliance

CSA/NRTL (C22.2.950, UL 1950)

EN60950, (IEC 950)

• Electrical fast transient/burst according to EN 61000-4-4:1995 (AC/DC
power supply: ±1 kV, Data/Signal lines: ±0.5 kV)

• Surge immunity test according to EN 61000-4-5:1995
(AC/DC Line to Line: ±1 kV, AC/DC Line to Earth: ±2 kV)

• Immunity to conducted disturbances, Induced by radio-frequency fields:
EN 61000-4-6:1996 (0.15 - 80 MHz with
1 kHz AM 80% Modulation: 3 V/m)

• Power frequency magnetic field immunity test according to
EN 61000-4-8:1993 (1 A/m at frequency 50 Hz)

• Voltage dips, short interruptions and voltage variations immunity test
according to EN 61000-4-11:1994 (>95% Reduction @10 ms, 30%
Reduction @500 ms, >95% Reduction @5000 ms)

LVD:

• EN 60950 (A1/1992; A2/1993; A3/1993; A4/1995; A11/1997)

MDD:

• IEC 60601-1

C

OMPLIANCES

v

Wichtige Sicherheitshinweise (Germany)

1. Bitte lesen Sie diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie keine Flüssigoder
Aerosolreiniger. Am besten eignet sich ein angefeuchtetes Tuch zur Reinigung.

4. Die Netzanschlu ßsteckdose soll nahe dem Gerät angebracht und leicht zugänglich sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen oder Fallen
könnte Beschädigungen hervorrufen.

7. Die Belüftungsöffnungen dienen der Luftzirkulation, die das Gerät vor Überhitzung schützt.
Sorgen Sie dafür, daß diese Öffnungen nicht abgedeckt werden.

8. Beachten Sie beim Anschluß an das Stromnetz die Anschlußwerte.

9. Verlegen Sie die Netzanschlußleitung so, daß niemand darüber fallen kann. Es sollte auch
nichts auf der Leitung abgestellt werden.

10. Alle Hinweise und Warnungen, die sich am Gerät befinden, sind zu beachten.

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom Stromnetz
trennen. Somit wird im Falle einer Überspannung eine Beschädigung vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten in das Gerät
gelangen. Dies könnte einen Brand bzw. elektrischen Schlag auslösen.

13. Öffnen sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen Sicherheit nur von
authorisiertem Servicepersonal geöffnet werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen und von einer
qualifizierten Servicestelle zu überprüfen:

a. Netzkabel oder Netzstecker sind beschädigt.
b. Flüssigkeit ist in das Gerät eingedrungen.
c. Das Gerät war Feuchtigkeit ausgesetzt.
d. Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioniert oder Sie mit

Hilfe dieser Anleitung keine Verbesserung erzielen.
e. Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.
f. Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.

15. Stellen Sie sicher, daß die Stromversorgung dieses Gerätes nach der EN 60950 geprüft ist.
Ausgangswerte der Stromversorgung sollten die Werte von AC 7.5-8 V, 50-60 Hz nicht über
oder unterschreiten sowie den minimalen Strom von 1 A nicht unterschreiten.

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt 70dB(A) oder
weniger.

C

OMPLIANCES

vi

vii

TABLE OF CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installing the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Selecting a Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Application Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Twisted-Pair Cable and Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . 8

10BASE-T/100BASE-TX Pin Assignments . . . . . . . . . . . . . . . . . . 9

Connectivity Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 10

EZ Switch 10/100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

viii

1

I

NTRODUCTION

The EZ Switch™ 10/100, SMC-EZ6516TX, is a 16-port Fast Ethernet
switch. The 10BASE-T/100BASE-TX ports deliver dedicated
10/100 Mbps links to each attached LAN segment

—all with conventional

cabling and adapters. Auto-negotiation is used to select the optimal
transmission speed and communication mode for each connection. With
store-and-forward switching and flow control, maximum data integrity is
always maintained even under heavy loading. Easy installation and
reliability make this plug-and- play switch an ideal choice for smooth Fast
Ethernet integration.

Features and Benefits

• Auto-negotiation of half or full duplex on all ports

• Automatic MDI/MDI-X operation

• IEEE 802.3u and 802.3 compliance ensures compatibility with

standards-based hubs, switches and cards from any vendor

• Store-and-forward switching ensures error-free transmission

• Half- and full-duplex flow control prevents packets from being

dropped under heavy loading

• Plug-and-play

• “At-a-glance” LEDs for port and system status monitoring

• Desktop installation

I

NTRODUCTION

2

LED Indicators

The front panel of the switch provides status LEDs for “at-a-glance”
system monitoring. The following table details the functions of the various
indicators.

Rear Panel

This EZ Switch 10/100 model features 16 10BASE-T/100BASE-TX
ports with RJ-45 connectors located on the rear panel of the switch.
Because all ports on the switch support automatic MDI/MDI-X
operation, you can use straight-through cables for all network connections
to PCs or servers, or to other switches or hubs.

The DC power receptacle is located on the rear panel of the switch.

Port and System Status LEDs

LED Condition Status

Power On The switch is receiving power.

Ports

Link/Act On The port has established a valid network

connection.

Off The port has not established any network

connection.

Flashing Traffic is passing through the port.

1

9

8

7 6

5

4

3

2

101112131415

16

9V1A9V

1A

3

I

NSTALLING THE

S

WITCH

The EZ Switch 10/100 can be placed on a desktop or shelf, and stacked
with other switches using the provided 4 rubber foot pads.

Package Contents

The EZ Switch 10/100 includes:

Selecting a Site

Be sure to follow the site selection guidelines below when choosing a
location:

• Select a suitable location for the switch:

• It should be accessible for installing, cabling and maintaining the
switch.

• The temperature and humidity should be within the ranges listed
in the specifications.

• The status LEDs should be clearly visible.

• There should be adequate space (approximately two inches) on all
sides for proper air flow.

• EZ Switch 10/100 (SMC-EZ6516TX)

• Four rubber foot pads

•This User Guide

• Appropriate DC power adapter

• SMC Warranty Registration Card

I

NSTALLING THE SWITCH

4

• Make sure twisted-pair cable is always routed away from power lines,
fluorescent lighting fixtures and other sources of electrical interference
such as radios, transmitters, etc.

• Make sure that a properly grounded power outlet is within 2.44 meters
(8 feet) of the switch and is powered from an independent circuit
breaker. As with any equipment, using a filter or surge suppressor is
recommended.

Instructions

1. Positioning the Switch: For desktop or shelf mounting, attach the

four adhesive foot pads to the bottom of the switch.

2. Applying Power: Plug one end of the power adapter into the socket

on the switch’s rear panel, and the other end into an appropriate
electrical outlet. Check the Power LED to be sure power is on.

Note: It is not necessary to power off the switch before connecting or

disconnecting any UTP cables, as these actions will not disrupt
the operation of other devices attached to the switch.

3. Connecting PCs: Connect each PC to an RJ-45 port on the switch

using a straight-through twisted-pair cable segment, maximum length
100 meters (328 ft). The EZ Switch 10/100 will support up to 16 PCs.
All ports on the switch support automatic MDI/MDI-X operation, so
you can use straight-through cables for all network connections to PCs
or servers, or to other switches or hubs.

Note: If an attached device does not support auto-negotiation, the data

rate will be sensed automatically and the communication mode
will default to half duplex.

4. Cascading Switches and Other Network Devices: All the ports on

the switch support automatic MDI/MDI-X configuration for cable
connections. This allows you to use straight-through cable to connect
to other switches or hubs from any port on the switch. No crossover
cables or other device settings are needed. See the “Cable

I

NSTRUCTIONS

5

Specifications” on page 8 and “Connectivity Guidelines” on page 9 of
this guide for further information.

A

PPLICATION EXAMPLES

6

A

PPLICATION

E

XAMPLES

Some typical applications for the SMC-EZ6516TX are illustrated below:

Standalone LAN

Cascading Switches

10 Mbps

100 Mbps

SMC-EZ6516TX

100 Mbps
Server

100 Mbps Workstations

10 Mbps Workstations

1

9

8

7 6

5

4

3

2

101112131415

16

9V1A9V

1A

SMC-EZ6516TX

SMC-EZ6516TX

100 Mbps Workstations

100 Mbps
Servers

100 Mbps

Workstation

100 Mbps

Workstation

100 Mbps
Server

100 Mbps
Segment

10 Mbps
Segment

1

9

8

7 654

3

2

101112131415

16

9V1A9V

1A

1

9

8

7 654

3

2

101112131415

16

9V1A9V

1A

I

NSTRUCTIONS

7

T

ROUBLESHOOTING

1. Symptom

Power LED does not light after power on.

Probable Causes

• DC power adapter may be defective.

Possible Solutions

• Check for loose connections.

• Check the power outlet by using it for another device.

• Replace the DC power adapter.

2. Symptom

Link LED does not light after connection is made.

Probable Causes

• Switch port, network card or cable may be defective.

Possible Solutions

• Check that the switch and attached device are both powered on.

• Be sure the network cable is connected to both devices.

• Verify that Category 5 cable is used for 100 Mbps connections and that

the length of any cable does not exceed 100 meters (328 feet).

• Check the network card and cable connections for defects.

• Replace the defective card or cable if necessary.

C

ABLES

8

C

ABLES

Cable Specifications

Twisted-Pair Cable and Pin Assignments

Caution: DO NOT plug a phone jack connector into any RJ-45 port.

Use only twisted-pair cables with RJ-45 connectors that
conform with FCC standards.

For 10BASE-T/100BASE-TX connections, a twisted-pair cable must have
two pairs of wires. Each wire pair is identified by two different colors. For
example, one wire might be red and the other, red with white stripes. Also,
an RJ-45 connector must be attached to both ends of the cable.

Caution: Each wire pair must be attached to the RJ-45 connectors in a

specific orientation.

The figure below illustrates how the pins on the RJ-45 connector are
numbered. Be sure to hold the connectors in the same orientation when
attaching the wires to the pins.

Cable Types and Specifications

Cable Type Max. Length Connector

10BASE-T Cat. 3, 4, 5 100-ohm UTP 100 m (328 ft) RJ-45

100BASE-TX Cat. 5 100-ohm UTP 100 m (328 ft) RJ-45

1

8

8

1

T

WISTED-PAIR CABLE AND PIN ASSIGNMENTS

9

10BASE-T/100BASE-TX Pin Assignments

With standard straight-through 10BASE-T/100BASE-TX cable, pins 1 and
2 are used for transmitting data, and pins 3 and 6 for receiving data. The
“+” and “-” signs in the table below are used to represent the polarity of the
wires that make up each wire pair.

Because all ports on this switch support automatic MDI/MDI-X
operation, you can use straight-through cables for all network connections
to PCs or servers, or to other switches or hubs.

Connectivity Guidelines

When adding hubs (repeaters) to your network, please follow the
connectivity rules listed below for Fast Ethernet. However, note that
because switches break up the path for connected devices into separate
collision domains, you should not include the switch or connected cabling
in your calculations for cascade length involving other devices.

Note: Network diameter is defined as the wire distance between two

end stations in the same collision domain.

Straight-Through RJ-45 Pin Assignments

End 1 End 2

1 (Tx+) 1 (Tx+)

2 (Tx-) 2 (Tx-)

3 (Rx+) 3 (Rx+)

6 (Rx-) 6 (Rx-)

Maximum Fast Ethernet Network Diameter

Repeater Type and
Number

Twisted Pair
100BASE-TX

Twisted Pair/Fiber
100BASE-TX and FX

1 Class I 200 m (656 ft) 260.8 m (855.4 ft)

1 Class II 200 m (656 ft) 308.8 m (1012.6 ft)

2 Class II 205 m (672.4 ft) 216.2 m (709.1 ft)

P

RODUCT SPECIFICATIONS

10

P

RODUCT

S

PECIFICATIONS

EZ Switch 10/100

Model

SMC-EZ6516TX

Ports

16 10/100 Mbps RJ-45 auto-

MDI/MDI-X ports

Network Interface

RJ-45: 100 ohm, UTP cable

10BASE-T - Categories 3, 4, or 5
100BASE-TX - Category 5

LEDs

Power – one
Link/Activity - one per port

Switching Method

Store-and-forward

Filtering/Forwarding/Learning Rate

Full line rate

MAC Address Table

2 K entries per system

Memory Buffer

1.5 Mbyte per unit

Sizes

28.6 x 8.5 x 2.9 cm ( 11.1 x 3.3 x 1.1 in.)

Weight

0.37 kg (0.82 lbs)

Humidity, non-condensing

5% to 95%

EZ S

WITCH

10/100

11

Tem pe rat ur e

Operating: 0 to 40 °C (32 to 98 °F)
Storage: -40 to 70 °C (-40 to 158 °F)

Power Requirement

DC input: 9 V/1 A

Power Consumption

9 Watts

Heat Dissipation

30.2 BTU/hr

Maximum Current

0.8 A @ 9 VDC

Standards

IEEE 802.3
IEEE 802.3u
IEEE802.3x
ISO/IEC 8802-3

EMC/Safety Compliances

CE Mark
Emissions

FCC Class B
EN 55022 (CISPR 22) Class B
C-Tick - AS/NZS 3548 (1995) Class B
EN 61000-3-2/3

Immunity

EN 61000-4-2/3/4/5/6/8/11

Safety

CSA/NRTL (C22.2.950, UL 1950)
TUV/GS (EN 60950)
CB (IEC 60950)

War ran ty

Limited Lifetime

P

RODUCT SPECIFICATIONS

12

FOR TECHNICAL SUPPORT, CALL:

From U.S.A. and Canada (24 hours a day, 7 days a week)

(800) SMC-4-YOU; [phone]; Fax: [phone]

From Europe (8:00 AM - 5:30 PM UK Time)

44 (0) 118 974 8700; Fax: [phone]

INTERNET

E-mail addresses:

[e-mail]
[e-mail]
[e-mail]

Driver updates:

http://www.smc.com/index.cfm?action=tech_support_drivers_downloads

Wor ld Wi d e We b:

http://www.smc.com
http://www.smc-europe.com
http://www.smc-asia.com

FOR LITERATURE OR ADVERTISING RESPONSE, CALL:

U.S.A. and Canada: (800) SMC-4-YOU; Fax [phone]
Spain: 34-93-477-4935; Fax [phone]

UK: 44 (0) 1932 866553; Fax [phone]
France: 33 (0) 41 38 32 32; Fax [phone]
Italy: 39 (0) 335 5708602; Fax [phone]
Benelux: 31 33 455 72 88; Fax [phone]
Central Europe: 49 (0) 89 92861-0; Fax [phone]
Nordic: 46 (0) 868 70700; Fax [phone]
Eastern Europe: 34 -93-477-4920; Fax [phone]
Sub Saharian Africa: 27 0126610232; Fax [phone]
North West Africa: 216 71236616; Fax [phone]
CIS: 7 (095) 789 35 73; Fax [phone]
PRC (Beijing): 86-10-8251-1550; Fax [phone]
PRC (Shanghai): 86-21-6485-9922; Fax [phone]
Taiwan: 886-2-8797-8006; Fax [phone]
Asia Pacific: (65) 6 238 6556; Fax [phone]
Korea: 82-2-553-0860; Fax [phone]
Japan: 81-3-5645-5715; Fax [phone]
Australia: 61-2-8875-7887; Fax [phone]
India: 91 22 5696 2790; Fax [phone]
Middle East: 97 14 299 4466 Fax [phone]
Thailand: 66 2 651 8733 Fax [phone]

If you are looking for further contact information, please visit www.smc.com,
www.smc-europe.com, or www.smc-asia.com.

Model Number: SMC-EZ6516TX
Pub. Number: 150000006200H E072003-R01