SMC Networks TigerSwitch SMC-6152PL2, 6152PL2 - FICHE TECHNIQUE Specifications
Key Features and Benefits
The SMC6152PL2 is a Fast Ethernet Layer 2/4 Power over Ethernet switch featuring 48-ports 10/100Base-TX, 2-ports 1000Base-T
(RJ-45) and 2-ports Gigabit combo (RJ-45/SFP). The SFP ports support both 100Base-FX and 1000Base-X. The switch is ideal for
Fast Ethernet desktop connectivity and wiring closets to power device such as IP phones, wireless access points and IP cameras.An
integrated part of the SMC61xx and SMC81xx switch families is support for IP Clustering, which allows to group up to 32 switches
together into a single logical group which can be managed using a single IP address. This switch is a cost-effective solution that is
packed with features and brings continuous availability, enhanced security and advanced QoS to the edge of the network, while
maintaining simplicity of management.
Product Overvie w
SMC6152PL2
Managed Standalone Fast Ethernet
PoE L2/4 Switch
Performance and Scalability
With 17.6 Gbps switching capacity, the SMC6152PL2 delivers
non-blocking and wire-speed switching performance on all
Fast Ethernet and Gigabit Ethernet ports.
The four Gigabit Ethernet combo ports provid es fle xible
choices for uplink copper or fiber uplinks.
High Availability
IEEE 802.1w Rapid Spanning Tree Protocol provides a loopfree network and redundant links to the core network with
rapid convergence, to ensure faster recovery from failed links,
enhancing overall network stability and reliability.
IEEE 802.1s Multiple Spanning Tree Protocol runs STP per
VLAN, providing Layer 2 load sharing on redundant links.
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
increases bandwidth by automatically aggregating several
physical links together as a logical trunk and providing load
balancing and fault tolerance for uplink connections.
IGMP snooping prevents flooding of IP multicast traffic and
limits bandwidth intensive video traffic to the subscribers only.
Broadcast Storm Control prevents faulty end stations from
degrading overall system performance.
Comprehensive QoS
4 egress queues per port enable differentiated management of
up to 4 traffic types.
Traffic is prioritized according to 802.1p,DSCP, L4 port
number and Access control list, giving optimal performance t o
real-time applications such as voice and video.
Asymmetric bi-directional rate-limiting, per port or per traffic
class, preserves network bandwidth and allows maximum
control of network resources.
Enhanced Security
Port Security ensures secure access to switch ports based on
MAC addresses, limits the total number of devices from using
a switch port and protects against MAC flooding attacks.
IEEE 802.1x port-based or MAC-based access control
ensures all users are authorized before being granted access
to the network. User authentication is carried out using any
standard-based RADIUS server.
Access Control Lists (ACLs) can be used to restrict access to
sensitive network resources by denying packets based on
source and destination MAC addresses, IP addresses,
TCP/UDP ports. This is done by hardware, so switching
performance is not compromised.
Security Shell (SSH) and Secure Sockets Layer (SSL/HTTPS)
encrypt network management information via Telnet and web,
providing secure network management.
TACACS+/RADIUS Authentication enables centralized control
of the switch and restricts unauthorized users from altering the
configuration of the switch.
Private VLAN isolates edge ports to ensure user privacy.
Simplified Management
Industry standard Command Line Interface (CLI) via console
port or Telnet provides a common user interface and
command set for users to manipulate the switch. The
embedded user friendly web interface helps users configure
switches quickly and simply. Four groups of RMON are
supported for traffic management, monitoring and analysis.
When upgrading firmware or fine-tuning configuration, the dual
software images and multiple configuration files can be used
for backup. TFTP can be used to backup or restore firmware
and configuration files.
PoE Features
SMC6152PL2 can transfer data and power to PoE enabled
devices such as VoIP phones, wireless access points and IP
surveillance cameras, using existing CAT 5 cables to
distances of up to 100 meters. It supports up to 15.4W on 24
ports or 7.5W on 48 ports. The need for individual power
sources is eliminated, saving on costs for power cable
installation and avoiding power outlet availability issues later.
If the power demand exceeds the switch’s maximum power
supply, ports can be prioritized to receive power.
Physical Ports
48 100Base-TX ports
2 1000Base-T RJ-45 ports
2 Combo Gigabit (RJ-45/SFP) ports
SFP ports support 100Base-FX and 1000Base-X
1 RS-232 DB-9 console port
Management
Switch Management:
CLI via console port or Telnet
WEB management
SNMP v1, v2c, v3
EliteView
Firmware & Configuration:
Dual firmware images
Firmware upgrade via TFTP/FTP/HTTP server
Auto upgrade via TFTP server
Multiple configuration files
Configuration file upload/download via TFTP server
Diagnostic support TFTP download
RMON (groups 1, 2, 3 and 9)
BOOTP, DHCP for IP address assignment
HCP dynamic provision (option 66/67)
SNTP
Event/Error Log/Syslog Flow
VLAN mirror
MAC based mirror
Auto Traffic Control (ATC)
Delay reload
Switching Capability: 17.6Gbps
Packet Buffer Size: 1Mb
MAC Address Table: 8K
Performance
Auto-negotiation for port speed and duplex mode
Flow Control:
IEEE 802.3x for full duplex mode
Back-Pressure for half duplex mode
Spanning Tree Protocol:
IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
Loop back detection
Auto edge port
BPDU filter/guard
Root guard
VLANs:
Supports 256 IEEE 802.1Q VLANs
Port-based VLANs
GVRP
IEEE 802.1v Protocol-based VLANs
MAC based VLAN
IP Subnet based VLAN
Private VLAN
VLAN trunking
QinQ
Voice VLAN
Link Aggregation:
Static Trunk
IEEE 802.3ad Link Aggregation Control Protocol
Trunk groups: 4, Trunk links: 2~8
IGMP Snooping:
IGMP v1/v2/v3 snooping
IGMP Querier
IGMP snooping leave proxy
IGMP Filtering/throttling
IGMP immediate leave
MVR (Multicast VLAN Registration)
Supports jumbo frames up to 9KB
L2 Features
RFC2863 Interface MIB
IfXTable group
IfstackTable group (read-only)
RFC2665 Ether-Like MIB
Dot3StatsTable group
RFC1493 Bridge MIB
Dot1dBase group
Dot1dStp group
Ddot1dTp group
Dot1dStatic group
RFC2674 Extended Bridge MIB (P-bridge, Q-bridge)
P-bridge
Dot1dExtBase group
Dot1dPriority group
Q-bridge
Dot1qBase group
Dot1qTp group
Dot1qStatic group
Dot1qVlan group
RFC2819 RMON MIB (groups 1,2,3,9 only)
Statistics group
History group
Alarm group
Event group
RFC2618 RADIUS MIB
RADIUS Auth Manu Driven Interface enter MIB group
RFC2737 Entity MIB
Entity Physical group
Private MIB
SNMP Standards
Features
QoS Features
Priority Queues: 4 hardware queues per port
Traffic classification based on IEEE 802.1p CoS, IP and DSCP.
Supports WRR and Strict scheduling
Bandwidth Control:
Egress rate limiting: 64 Kbps, 100 Mbps
Ingress rate limiting: 64 Kbps, 100 Mbps
IEEE 802.3af Power over Ethernet (PoE)
Maximum output power per port up to 15.4W
on 24 ports or 7.5W on 48 ports
Provides power on all 48 ports
LED indicators for power status per port
Power on/off command for each port
PoE Features
Security
IEEE 802.1X port based/MAC-based access control
Guest VLAN
RADIUS authentication
DHCP Snooping
IP Source Guard
DHCP option 82
Dynamic ARP inspection (DAI)
TACACS+ 3.0
Access Control List (L2/L3/L4/IPv6)
SSH (v1.5/v2.0)
SSL
Loading...