Smc WMR-AG User Manual

Copyright

Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice.

Trademarks SMC® is a registered trademark; and EZ-Stream, EZ Connect, Barricade and EZ Hub are trademarks of SMC Networks, Inc. Other product and company names are trademarks or registered trademarks of their respective holders.

MUSICMATCH® is a registered trademark of MUSICMATCH, Inc.

Compliances

FCC - Class B

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

SMC Networks, Inc. declare under our sole responsibility that the product “SMCWMR-AG EZ-Stream Universal 2.4GHz/5GHz Wireless Multimedia Receiver complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION STATEMENT: FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 5 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: In order to maintain compliance with the limits of a Class B digital device, SMC requires that you use a quality interface cable when connecting to this device. Changes or modifications not expressly approved by SMC could void the user’s authority to operate this equipment. Attach unshielded twisted-pair cable (UTP) to the RJ-45 port and shielded USB cable to the USB port.

Industry Canada – Class B

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus", ICES-003 of Industry Canada.

Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils numeriques de Classe B prescrites dans la norme sur le material brouilleur: "Appareils Numeriques," NMB-003 edictee par l'Industrie.

EC Conformance Declaration – Class B

SMC contact for these products in Europe is:

SMC Networks Europe, Edificio Conata II Calle Fructuos Gelabert 6-8, 2o, 4a 08970 – Sant Joan Despi Barcelona, Spain

This information technology equipment complies with the requirements of the Council Directive 89/336/EEC on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility and 72/23/EEC for electrical equipment used within certain voltage limits and the Amendment Directive 93/68/EEC.

Important Safety Notices

• Unplug this product from the AC power before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.

• Route the power supply cords so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

• Situate the product away from heat sources such as radiators, heat registers, stoves, and other products that produce heat.

• To prevent fire or shock hazard, do not expose this unit to rain or moisture. Do not allow water or any foreign objects to enter the interior. This may cause a fire or electric shock. In the event that water or other foreign objects get into the product, immediately unplug the AC adapter from the electrical outlet and contact Customer Service for inspection and/or repair/replacement options.

• Do not take apart the equipment. This may cause fire, electric shock or other injuries.

• Do not overload wall outlets and extension cords as this can result in a fire or electric shock.

• This product is for use with the AC adapter that comes with it. Use with any other AC power is strongly discouraged as it may cause fire, electric shock, or damage to the equipment.

1 | Hardware Description

The SMCWMR-AG EZ-Stream Universal 2.4GHz/5GHz Universal Wireless Multimedia Receiver is equipped with:

• 1 RJ-45 connector for 10/100 Mbps connections

• 4 LED Indicators

o Power (blue)

 Solid LED indicates that the unit is powered on  No light indicates the unit is powered off

o Link (blue)

 Solid LED indicates a valid connection to the wireless

network & Media Server

 Blinking LED indicates that the SMCWMR-AG is attempting to

connect to the Media Server

 No light indicates that there is no link to the Media Server

o 100Mbps (green)

 Solid LED indicates a valid 100Mbps network connection  Blinking LED indicates traffic on the network  No light indicates that there is no link

o 10Mbps (green)

 Solid LED indicates a valid 10Mbps network connection  Blinking LED indicates traffic on the network  No light indicates that there is no link

Section 1.1 | Features / Benefits

• View your collection of digital pictures or other graphical content, music and movies/videos from any TV

• Create a customizable slide show containing all of your pictures

• Compact design allows for space savings in your home entertainment

center

• Automatically share digital multimedia content from multiple PCs

• Unparalleled support for Windows 98SE, Me, 2000, and XP

• Conforms to the standard of Universal Plug-and-Play (UPnP)

• Connects to 802.11b, 802.11g or 802.11a wireless networks

• Full optimization of your digital content-oriented environment

Section 1.2 | Using the Remote Control

The SMCWMR-AG Universal Wireless Multimedia Receiver Remote Control works much like several other remotes already found with other products (like DVD players, VCRs, TVs, etc.) with several extra features to make your digital content-oriented environment much easier to navigate.

• Power: Switches the Wireless Multimedia Receiver power state between "Stand-By" and "Power On"

• Audio: Displays the Audio Menu

• iRadio: Displays the Internet Radio Menu

• Picture: Displays the Photo Menu

• Video: Displays the Video Menu

• Menu: Displays the General Menu

• Info: Displays the Wireless Multimedia Receiver-specific data, such as

software version, wireless link quality, etc.

• Arrow Right: Scroll to the right in the TV UI display. Press and release to move one position to the right (useful when configuring the network settings like SSID, IP Address, etc.) Press and hold to scroll continuously.

• Arrow Left: Scroll to the left in the TV UI display. Press and release to move one position to the left (useful when configuring the network settings like SSID, IP Address, etc.) Press and hold to scroll continuously.

• Arrow Up: Scroll up in the TV UI display. Press and release to move one position up. (Useful when configuring the network settings such as SSID, IP Address, and WEP) Press and hold to scroll continuously.

• Arrow Down: Scroll down in the TV UI display. Press and release to move one position down (useful when configuring the network settings like SSID, IP Address, etc.) Press and hold to scroll continuously.

• OK: Selects the highlighted item on the TV UI and, if available, advances to the next menu level.

• Back: Steps back to the previous Menu item.

• Search: Activates the "Search" menu. Only available when a vertical list

is displayed on the TV UI.

• Play/Pause: Plays the currently selected audio or video selection / Pauses the currently playing audio or video selection.

• Stop: Stops the currently playing audio or video.

• Previous: Plays the previous audio, video or photo selection. (Press and

release to return to the previous selection. Press and hold to reverse through the current selection.)

• Next: Plays the next audio, video or photo selection. (Press and release to advance to the next selection. Press and hold to fast forward through the current selection.)

2 | Package Contents

After unpacking the SMCWMR-AG, check the contents of the box to be sure you have received the following components:

• 1 EZ-Stream Universal Wireless Multimedia Receiver

• 1 Remote control

• 1 Packet of 2 AA batteries

• 1 RCA stereo audio cable

• 1 RCA video cable

• 1 RJ-45 Category 5 cable

• 1 EZ Installation Wizard and Documentation CD-ROM

• 1 Power Adapter

• 1 Quick Installation Guide

Immediately inform your dealer in the event of any incorrect, missing or damaged parts. If possible, please retain the carton and original packing materials in case there is a need to return the product.

Please register this product and upgrade the product warranty at SMC's Web site: http://www.smc.com

3 | System Requirements

To use the SMCWMR-AG, you must have:

• A host PC with Windows 98SE, Me, 2000, or XP for the Media Server application

• CD-ROM drive for EZ Installation Wizard and Media Server Software

• 400mhz or faster processor

• A minimum of 10Mb free disk space for Media Server Software (50Mb free

disk space needed for MUSICMATCH Jukebox)

• 128 MB of RAM (recommended)

• Cable or DSL modem

• For Internet Radio use: Broadband internet connection (>128kbits/sec)

through the use of SMC2304WBR-AG EZ-Stream Universal Wireless Cable/DSL Broadband Router

• The SMCWMR-AG supports Smart Box Management. This allows it to automatically check for firmware updates online and then give you the option to upgrade. To utilize this function, an internet connection is required. The SMCWMR-AG can support a direct internet connection or a connection through a proxy.

• Network Adapters:

o Wired Desktop: An SMC1255TX 10/100Mbps PCI Ethernet Card is

recommended

o Wireless Laptop: An SMC2336W-AG 802.11a/g Universal Wireless

Cardbus Adapter is recommended

o Wireless Desktop: An SMC2802W 802.11g Wireless PCI Card is

recommended

o Wired Laptop: An SMC8036TX 10/100Mbps Cardbus Ethernet

Adapter is recommended

• A stereo and/or TV viewing device

4 | SMC EZ-Stream Universal Wireless Multimedia Receiver Media Server Software Installation Windows 98SE/Me/2000/XP

This Installation method makes the process as simple and Plug-and-Play as possible. Simply run the Media Server program and continue to the following configuration sections. It's as easy as 1-2-3.

Step 1: Insert the EZ Installation Wizard and Documentation CD.

NOTE: If the “Auto-run” feature of your CD-ROM is disabled or if the EZ Installation Wizard does not automatically appear, please click the [Start] button from your Windows start menu. Click [Run] and type “?:\smcwmr.exe”.

Step 2: Click the [Install SMCWMR-AG Media Server] button.

Step 3: The wizard will begin extracting the program files and Media Server

Welcome screen will launch.

Click [Next] to begin installation.

Step 4: Read the License Agreement. Then click [Yes] to agree and continue.

Step 5: Confirm the destination folder where the Media Server application will

be stored. (Note: It is recommended to leave this at the default setting.) Click [Next] to continue.

Step 6: The installation will begin. After completion, click [Finish] to exit. You have now completed the Media Server install process.

+ 30 hidden pages