Smc RPUPOE DATASHEET

Power Unit
SMCRPUPOE
44 PPoorrtt RReedduunnddaanntt PPoowweerr UUnniitt
www.smc.com
Redundant power units provide an easy to install and use method of giving you the peace of mind required when managing safety tolerant systems.
This Redundant Power Unit (SMCRPUPOE) can supply 200W of primary power and up to 360W for PoE devices in the event of AC loss or failure of the internal power supply of the 1st attached device to fail. It ships with four DC Backup Power Cords included (IEC connectors). Thermal overload protection prevents the RPU from overheating if a thermal overload occurs. Over-
voltage protection shuts down an output channel if the voltage exceeds a preset threshold where as over-current protection shuts down the RPU if the output load exceeds a preset threshold. Short-circuit protection prevents the RPU from being damaged from a short circuit on any out­put channel. Four status indicators for Link, Activity, Fan, Thermal, and Power are located on the RPUs front panel. While the AC supply and DC backup sockets are located on the RPUs rear panel. The SMCRPUPOE can be mounted in a standard 19-inch equipment rack(brackets included) or on a flat surface.
FEATURES
OVERVIEW
Connects to up to four switches with cables included
Thermal overload protection
Supplies both the switch and PoE devices with power up to 560W.
Over-voltage protection for each output channel
Over-current protection
Short-circuit protection against output channels
TECHNICAL SPECIFICATIONS SMCRPUPOE
PORTS
4 RPU DC power outlets (IEC socket 216C743-07)
LEDS
Port: Link, Activity System: Power, Fan, Thermal
WEIGHT
5Kg (11lbs)
DIMENSIONS
44.0 x 32.3 x 4.3 cm (17.34 x 12.6 x 1.69 in.)
TEMPERATURE
Operating: 0 to 45 °C (32 to 113°F) Storage: -40 to 70 °C (-40 to 158 °F)
HUMIDITY
Operating: 5% to 95%
AC INPUT
100 to 240 V, 50 to 60 Hz
DC POWER CABLE CONNECTOR
18-pin P-Type connector
EIA RATINGS
10 A @ 125 VAC 10 A @ 250 VAC DC Power Cable Connector 14-pin P-Type connector
POWER SUPPLY
Internal, auto-ranging transformer: 100 to 240 VAC, 50 to 60 Hz Output 12 VDC, -50 VDC
POWER CONSUMPTION
570W (Maximum) 161 W (Maximum per port)
MAXIMUM CURRENT
7A @ 110 VAC 3A @ 220 VAC
OVERLOAD PROTECTION
Ports are shutdown when output exceeds 200 W @ 12 V or 360 W @ -50 V
POWER SUPPLY
+12 VDC Initial accuracy: +/- 1% Current: 2 A (minimum), 10 A (maximum) Line regulation: +/- 1% Load regulation: +/- 10% Overshoot and undershoot: 5%
COMPLIANCES
CE Mark
EMISSIONS
AS/NZS 3548 (1995) Class B EN 50081/2-1 EN 55022 (CISPR 22) Class B EN 60555-2 Class B EN 60555-3 EN 61000-3-2/3/4/6 FCC Class B Industry Canada Class B VCCI Class B
IMMUNITY
EN 55024
SAFETY
CSA/ C US (CSA22.2 No.60950-1 & UL60950-1) CB: IE 60950-1 TÜV/GS (EN 60950-1)
IMMUNITY
EN 55024 Safety CSA/ C US (CSA 60950-00 & UL60950) CB: IEC 60950 EN 60950 (TÜV/GS)
North America
38 Tesla Irvine, CA 92618 1-800-SMC-4YOU 24/7 Technical Support
Europe/ Africa
Fructuos Gelabert 6-8 08970 Sant Joan Despí Barcelona, Spain
Check www.smc.com for your local country contact information
www.smc.com
Contact
Loading...