Specifications are subject to change without notice. is a registered
trademark of SMC TECHNOLOGIES CO, LTD. Other brands and product names
are trademarks or registered trademarks of their respective holders.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that
may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
CE Mark Warning
This is a class A product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
The following contents should be found in your package:
¾ One SMCFS1601 /SMCFS2401 Switch
¾ One power cord
¾ This User Guide
¾ Mounting screws and two “L” planks
¾ Quick Installation Guide
¾ SMC Warranty Card
¾ Four rubber foot pads
Note:
Make sure that the package contains the above items. If any of the listed items are
damaged or missing, please contact with your distributor.
1
Chapter 1 Product Introduction
This chapter describes the features of the model of SMCFS1601/SMCFS2401
16/24-Port 10/100Mbps Fast Ethernet Switch.
1.1 Product Overview
SMCFS1601/SMCFS2401 Switch provides 16/24-Port 10/100Mbps AutoNegotiation RJ45 ports. Each port of the SMCFS1601/SMCFS2401 supports auto
MDI/MDI-X function, eliminating the need for crossover cables or Uplink ports. The
Switch is Plug- and-Play and any port can be simply plugged into a server, a hub
or a switch, using straight cable or crossover cable.
The SMCFS1601/SMCFS2401 16/24-port 10/100Mbps Fast Ethernet Switch
provides you with a low-cost, easy-to-use, high-performance, seamless and
standard upgrade to improve your old network to a 100Mbps network. It will boost
your network performance up to full duplex data transfer.
¾ Supports IEEE802.3X flow control for full-duplex mode and backpressure for
half-duplex mode
¾ LED indicators for monitoring power, link, activity, speed
¾ Rack-mountable steel case
¾ Internal power supply
Chapter 2 Identifying External Components
This Chapter describes the front panel, rear panel and LED indicators of the
Switch. SMCFS1601/SMCFS2401 just differ in the number of LED indicators and
ports, and all figures in this guide are of SMCFS2401.
2
Loading...
+ 10 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.