SMB Modulus 90 Technical Information
Technical Information
Trampoline “modulus 90”
page 1
Installation instructions EN 1176-1
Maintenance instructions EN 1176-1
03.04.2018
General
The work described must be carried out by a qualified person.
Due to the heavy weight of the completed trampoline, no further anchorage is necessary.
The trampoline is designed to build levelled with the ground.
Dimensions
Overall size: see draft plan
Minimum space: see draft plan
Jumping area: 1,37m²
Clearance: 1,50 m
Max. free fall height: 0,90 m
Age group
3 years and up
Number of users
1 person
Ground conditions
Please refer to DIN EN 1176-1 for ground conditions in the play area.
We recommend synthetic fall protection, as loose fall protection material like sand, bark mulch or
wood chips can fall easily into the trampoline and thus minimize the play value.
Installation tools – tools supplied
6 pieces support iron rings
1 piece Tool to assemble and/or remove jumping mats
Example Picture: Trampolin „modulus 90“ traffic orange
BUNTE HÜPFER
colortramp®
Artikelno. 7232001-E
Technical Information smb
Trampoline “modulus 90” Seilspielgeräte GmbH Berlin
page 2 Technikerstraße 6/8
15366 Hoppegarten
Telefon (0 33 42) 5 08 37 20
Telefax (0 33 42) 5 08 37 80
Assembly
The trampoline is erected after the ground has been excavated (450 mm deep, size according to number of
trampolines) and an even horizontal surface has been created. If there is a bad soil situation (e.g. loamy soil)
we recommend a drainage layer.
Boreholes (sealed with plugs), which are for the six supporting iron rings supplied, are located on the
sides of the frame. Please make sure to close these boreholes again! It has to be ensured that the
framework is lying snug and does not wobble. This can be checked simply by standing on it. The play
area around the trampoline has to be refilled appropriately.
Image 2
Loading...