SMATE SM2SB5.1TH150KINMA User Manual
MODEL NO.:SM2SB5.1TH150KINMA
Note:Please read the instructions carefully before operating
the set and retain it for further reference.
SMATE Theatre Series Soundbar
USER MANUAL
Content
Safety Precautions ------------------------------------------------------------ 01
Important Safeguards -------------------------------------------------------- 02
Specication -------------------------------------------------------------------- 03
Power Switch ------------------------------------------------------------------- 04
Front Control Panel ------------------------------------------------------------ 04
Remote control ----------------------------------------------------------------- 05
Amplied board ---------------------------------------------------------------- 06
USB Operation ------------------------------------------------------------------ 06
Bluetooth Operation ---------------------------------------------------------- 07
Aux Operation ------------------------------------------------------------------ 08
Subwoofer Output Operation ---------------------------------------------- 09
5.1CH/AC-3 Operation ------------------------------------------------------- 10
Wired Mic Operation ---------------------------------------------------------- 11
Optical Operation ------------------------------------------------------------- 12
Coaxial Operation ------------------------------------------------------------- 13
HDMI Operation --------------------------------------------------------------- 14
Installation Steps -------------------------------------------------------------- 15
Accessories ---------------------------------------------------------------------- 16
Trouble Shooting -------------------------------------------------------------- 16
Installing Batteries to the Remote Control ------------------------------ 17
Support -------------------------------------------------------------------------- 18
01
Safety Precautions
A. Please do not open the back cover or the soundbar
cover. The lighting flash symbol is to alert the user to
the presence of uninsulated "dangerous voltage"
within product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
Please refer to qualified service personnel with any
issues.
B. Please protect the power cord and plug. Avoid high
pressure, force, pulling or pushing of the power cord/plug.
C. The product is designed for indoor use only.
Please do not place the product in windy, sunny or heat
emitting surrounds. Please do not place the product in a
sealed box without any ventilation. Ventilation is required
for preventing excessive heat and any damage to the
unit from it.
D. Slots and openings in the unit cabinet are provided for
ventilation and to ensure reliable operation of the product
preventing any damage from excessive heating.
The openings should never be blocked.
E. To prevent fire or shock hazards do not expose the
apparatus to rain or liquids or any external materials.
No filling of external substances should be allowed at
anytime.
F. The product is designed to Australian Standards for
operation and safety. Please ensure the input voltage is
AC 240V/50Hz. If you are unsure about the power supply
please consult your dealer or local power company.
02
Important Safeguards
01. Read Instructions-All the safety and operating instructions should be read before the
appliance is operated.
02. Read Instructions-All the safety and operating instructions should be retained for future
reference.
03. Follow Instructions-All operating instructions should be followed.
04. Heed Warning-All warnings on the appliance and in the operating instructions should
be adhered to.
05. Power Source-The appliance should be connected to power supply for only the type
specified in the operating instruction or as marked on the appliance.
06. Power Cord Protection-Power supply cords should be routed such that they are not likely
to be walked on or pinched by items placed upon or against them. Pay particular attention to
cords at plugs, convenience receptacles and the point where they exit from the appliance.
07. Water and Moisture - The appliance should not be exposed to water, rain or moisture to
prevent fire or shock hazards. No filling of liquids should be allowed at anytime.
08. Ventilation-The appliance should be situated so that its location or position does not interfere
with its proper ventilation.Do not use the appliance on a bed,sofa,rug or similar surface that
may block the ventilation openings.
09. Heat-Keep the appliance away from heat sources such as radiators, heat registers,stoves,
or other appliances (including amplifiers) that produce heat.
10. Non-use Periods-The power cord of the appliance should be unplugged from the outlet
when left unused for a long period of time.
11. Damage Requiring Service-The appliance should be serviced by qualified service personnel
only when:
a. The power-supply cord or plug has been damaged.
b. Objects have fallen or liquid has been spilled into the appliance.
c. The appliance has been exposed to rain.
d. The appliance does not appear to operate normally or exhibits a marked change in
performance.
e. The appliance has been dropped , or the enclosure damaged.
12. Servicing-The user should not attempt to service the appliance beyond that specified in the
operating instruction.All other servicing should be referred to qualified service personnel.
13. Clean only with dry cloth.
14. Unplug this apparatus during lightning storms or when unused for long period of time.
Specification
Rated Power:150W(20Wx5+50W)
Input Voltage:AC 110-240V 50/60Hz
S/N RATIO:>86dB
THD(1KHZ,1W):<0.1%
Sensitivity:88dB
Speaker Drivers:
FR/FL:(3"x2+1")x2
CEN: 3"x2+1"
SR/SL: (3"x2 )x2
SUB: 5.25"x2
Frequency response:85Hz~20KHz (40Hz-250Hz for sub)
Product size:1098x236x165mm
03
The soundbar is designed with patented technology:
With patented loudspeaker phase control technology, SMATE sound bar subwoofer is designed
to operate at low-frequency which produces punchy bass. The centre and front loudspeaker are
designed to operate on full-frequency range which produces the centre and front channel sounds.
The surround sound loudspeaker is designed to operate on full-frequency ranges and its phase
control crossover to the centre & front phase control enhances the surround sound effect.
Meanwhile the soundbar built-in controller and audio control circuit board is designed so all the
functions can be controlled by the front panel or remote control.
This product complies to AS/NZS, CE & RoHS standards
Power Switch
Front Control Panel
04
1. LED display
2. Remote Control Receiver
3. USB Input
4. Master Volume-
5. Power (Standby/On)
6. MENU (Control each channel
volume separately)
7. Previous channel/ previous song
8. Memory indicator (for pre-setting the volume level)
9. Master Volume+
10. INPUT(Change input signal sources)
11. Next channel/ next song
12. Play/Pause
The soundbar power switch is located under the
LED display panel as shown in the picture above.
When turned on the display will light up automatically.
**
OFFON
Remote control
05
1. STANDBY
2. CH.MODE(2.1ch/5.1ch mode)
3. MASTER VOLUME+
4. PREVIOUS CHANNEL-
5. MASTER VOLUME-
6. SURROUND VOLUME-
7. CENTER VOLUME-
8. SUBWOOFER VOLUME-
9. MIC VOLUME-
10. MEMORY
11. INPUT(change input signal sources)
12. NEXT CHANNEL+
13. PLAY/PAUSE
14. SURROUND VOLUME+
15. CENTER VOLUME+
16. SUBWOOFER VOLUME+
17. MUTE
18. MIC VOLUME+
19. MIC VOLUME SETTINGS(set up echo or volume)
Loading...