Smart Wave SMARTMIKE102 User Manual

Introduction1

【Name】：Smart Mike

【Material】：ABS+PC

【Accessory】：Smart Mike+User’s Manual

【Compatible OS】：iOS

【Usage】：Voice Recording for Video shooting & Audio

Recording

录音

设置拍摄视频集

【Notice】：The Smart Mike enters sleep mode while idle

for 5 mins. Press the button to wake up.

Hardware

2

Mic

搜索设备

选择设备连接

【Video Shooting】Entering Video Shooting page, click the red

circle icon to start video shooting. The 3 seconds countdown is

counting and the Smart Mike LED turns to Red blinking indi-

cates the recording is in process. The upper right corner indi-

cates storage capacity and Smart Mike batter status. The upper

left corner indicates the name of the Smart Mike and the device

could be off-line via click on. (As figure shown)

剩余内存 剩余电量设备名称

连接状态

Before Recording Recording Finish

【Recording - File】All recording documents (including down-

loaded/non-downloaded audio files) can be manage in this

page. Remote audio file on Smart Mike can be download one

by one or together at once. Pictures shown as below.

点击进入多个取回界面

声音未取回
状态

录音时间

录音时长

声音取回
状态

可重命名

点击进入单个
取回声音流程

点击进入播放
录音页面

How To Use

3

【Download】：Download the Smart Mike app from App Store

【Power On Smart Mike】：Long press the power button for 3

seconds. Green light indicates the Smart Mike is power on and

ready.

【Connect to the App】：Turn on Bluetooth feature on the

iPhone, and click on the Smart Mike app. Then click on the

Shooting icon or the Recording icon to enter Bluetooth scanning

mode (As figure shown). The blue LED indicates the Bluetooth

connection is established.

预览图

Before Shooting Countdown Shooting Finish

【Audio Recording】There are two parts in Audio Recording

page. One is Recording the other is File. The recorded docu-

ments list in File page. Click on the red circle “start” button to

start voice recording and the LED on Smart Mike is red in blink-

ing.

文件

取回声音素材

【To Download the audio file on Smart Mike】Click on the listed

file to start download. To turn on the Smart Mike Wi-Fi, connect

to the MIC-xxxxxx Wi-Fi, download the file automatically.

Multi-chose files to download at once. To turn on the Smart

Mike Wi-Fi, connect to the MIC-xxxxxx Wi-Fi, download the file

automatically.

Chose the files

to download.

To Turn on the

Smart Mike Wi-Fi

To connect the

Smart Mike Wi-Fi

Click on the

MIC-xxxxxx Wi-Fi

Secondary page in Clip: The videos in this page can be

shared/deleted/moved to other folders. (As figures shown)

触发分享／
移动／删除
命令

点击可预览该
视频

合成后的手机
与smart mike
声音比率

Gallery： The video in this page is the list of raw materials. The

remote audio file in Smart Mike can be download via this page

Fcc Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equip-

ment generates uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions,may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a particular installa-

tion. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

DownloadingDownload Complete

【Videos Collections 】 Video can be categorized into Clip and

Gallery. “Clip” is the video with Smart Mike audio mixed. “Gal-

lery” is raw video material without Smart Mike audio mixed.

Clip: Clip is the main page of the Smart Mike app. The videos in

Clip can be categorized, renamed and deleted. (Notice: There

and Cut & Mixing is available after the remote file downloaded.

Combination of audio sources from iPhone or Smart Mike to be

mixed into the video is available in mixing page. And the mixed

video will be saved a copy in iPhone local album. (As figures

shown)

【Settings 】 Setting about the APP and the Smart Mike hard-

ware are available in this page.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

-Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment. This device complies with Part 15

of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

are 3 folders in video collections can not be deleted. ) (As figure

shown)

添加视频集

删除视频集

重命名视频集

LED4

【Green LED is on】：Smart Mike is power on and ready
【Blue LED is on】：Bluetooth connection is established
【Red LED Blinking】：Recording
【Pink LED is on】：Bluetooth is connected and Smart Mike

Wi-Fi is on,