KVM
SWITCH
(IC-312-AUTD / IC-312-AUD)
(IC-314-AUTD / IC-314-AUD)
USER MANUAL V1.2
IC-312-AUTD/IC-312-AUD
IC-314-AUTD/IC-314-AUD
Package Contents –
1 Smart View IC-312-AUTD or IC-312-AUD or
IC-314-AUTD or IC-314-AUD KVM Switch
1 User Manual
1 power adapter DC 9V
Please contact your vendor if anything is missed.
-1-
Features
Controls PCs with one USB keyboard, USB mouse
and monitor respectively.
Supports USB 1.0, 1.1, 2.0 Specification compliant
and supports UHCI, OHCI & EHCI host controller.
Supports USB Boot protocol & Wakeup Device.
Supports the windows, Linux, Macintosh with USB
connection.
Supports speaker & microphone.
Supports DUAL-VIEW Display(only IC-312-AUTD,
IC-314-AUTD).
Use Panel Link digital technology.
Supports high-resolution display up to UXGA
(25-165MHz).
Compliant with the specification of DVI 1.0.
Support DVI-D Single Link.
3 ways for PC selection -- Push-button switch, hot
key or mouse clicking.
Easy to install--No software required.
Hot Pluggable.
Auto scan function to monitor PCs.
Auto skips over the power-off PC.
Beep sound and multi selection ways on/off option
for port selection.
-2-
Specifications
Function
IC-312-
AUD
IC-312-
AUTD
IC-314-
AUD
IC-314-
AUTD
PC Connectors 2 4
Port Selection
Push-button Switch / Hot Key
/ Mouse Clicking
On Line 2 4
LEDs
Selected 2 4
Console
Port
2x USB A-Type Connectorkeyboard
Mouse
CPU
Port
2 x USB B-Type 4 x USB B-Type
Console
DVI Port
1 2 1 2
CPU
Port A
2 4
Connector
Monitor
CPU
Port B
2 4
Console
Port
1x Audio, Mic. 1x Audio, Mic.
Audio,Mic.
(Jack)
CPU
Port
2x Audio, Mic. 4x Audio, Mic.
Resolution 1600x1200 60Hz
Power Adapter DC 9V
Scan Interval 5 sec ~ 30 sec
Housing Metal
Weight 515g 545g 1135g 1185g
Dimensions (LxWxH) 200x80x42 mm 340x114x44 mm
Cable Distance
(Device to Monitor)
10 M
Appearance
Front View
1. Push-button Switches (Manual type)
2. Port LEDs
3. Console Keyboard and Mouse Ports
4. Console Audio and Mic. Ports
-3-
Rear View
1. Console DVI Connector.
2. CPU DVI Port Connectors.
3. CPU USB Port Connectors.
4. CPU Audio and Mic. Port Connectors.
Installation
Before the installation, make sure the peripherals of all PCs are
grounded properly and turned off.
1. Connect the monitor, keyboard, Audio, Mic. and mouse with
the Console Port Connectors.
2. Connect the power cord on the KVM.
3. Connect DVI cable, USB A to B cable, Audio cable and Mic.
cable between the PC and the CPU port.
4. Turn on the PCs.
Operation
1. The function of LED display:
LED DISPLAY DESCRIPTION
Light off PC power off
Green light on PC power on and connected
Green light on & Red light
flashing
PC power on, connected and
selected
Note: It occurs occasionally that the green light of LED display is
on and the red light of LED display keeps flashing after
shutting down the PC because of the PC default. The
condition will not affect the regular operation of KVM
switch.
2. 3 ways for PC selection – Push-button switch, hot key or
mouse clicking
2-1 Push-button switch (Manual Type)
Press the button on front panel to switch the CPU ports.
The red light of LED indicates which PC is selected.
-4-
2-2 Mouse clicking
Item Operation Function
IC-312-AUTD
IC-312-AUD
[Middle button] + [Left Button] or
[Middle button] + [Right Button]
Access between
two PCs.
[Middle button] + [Left Button]
Switch to the
previous PC.
IC-314-AUTD
IC-314-AUD
[Middle button] + [Right Button]
Switch to the next
PC.
Note: 2-Key Mouse is NOT applicable.
2-3 Hot Key option
Hot Key Navigation allows you to select PC from the
keyboard directly.
Options for Hot Key Navigation:
Select PC by Hot Key
Command mode
Auto scan mode
Beep sound on/off option: Press [Right Shift] key
twice to turn on or off the beep sound when needed.
Select PC by Hot Key:
Press either left or right [Ctrl] key twice.
Item Hot Key Operation Function
IC-312-AUTD
IC-312-AUD
[L Ctrl] + [L Ctrl] or
[R Ctrl] + [R Ctrl]
Access between two PCs.
[L Ctrl] + [L Ctrl] Switch to the previous PC.
IC-314-AUTD
IC-314-AUD
[R Ctrl] + [R Ctrl] Switch to the next PC
Command Mode:
Press [Num Lock] key twice, and the 3 keys [Num Lock],
[Caps Lock] and [Scroll Lock] will flash to access the
Command Mode.
a). Directly press the function key [F1] ~ [F2] for
IC-312-AUTD/IC-312-AUD or [F1] ~ [F4] for
IC-314-AUTD/IC-314-AUD to select PC.
b). Press [Left Ctrl] key to disable [Ctrl] and [Shift] hot key
function.
c). Press [Right Ctrl] key to enable [Ctrl] and [Shift] hot key
function.
d). Press [Left Shift] key to turn off the beep sound.
e). Press [Right Shift] key to turn on the beep sound.
f). Press [Left Win] key or mouse [Middle button] + [Left
Button] to disable Mouse clicking function.
g). Press [Right Win] key or mouse [Middle button] + [Right
Button] to enable Mouse clicking function.
h). Press [Left Alt] key to disable Auto skip function.
i). Press [Right Alt] key to enable Auto skip function.
j). Press [Esc] or [Enter] key to quit the mode.
Note: [Ctrl] Hot Key function – Selecting PC ports.
[Shift] Hot Key function – Beep sound on/off.
-5-
Auto Scan Mode:
Press [Scroll Lock] key twice to activate the Auto Scan Mode.
The time scale of Auto Scan ranges from 5 to 30 seconds,
and it can be recognized by the lights of the 3 keys [Num
Lock], [Caps Lock] and [Scroll Lock] as the timetable below.
a). Press the right number key [+] to increase time scale.
b). Press the right number key [-] to decrease time scale.
c). Press [Esc] key to quit the mode.
Note: Light(s) corresponding timetable
Seconds Num Lock Caps Lock Scroll Lock
5 seconds Off Off On
10 seconds On Off Off
15 seconds On Off On
20 seconds Off On Off
25 seconds Off On On
30 seconds On On Off
1.The boot-up default of Smart View KVM Switch is
connected to your first activated PC.
2,When the PC is shut down under the function of “Auto
skips over the power-off PC”, it cannot be turned on again
by keyboard.
3.Console-Reconfirmed
Simultaneously press the Port Selection Switches
on the panel of port1 and port2, then Console
Reconfirmed function will update the EDID data from
the monitor.
-6-
Troubleshooting
Make sure the cables are qualified and positioned.
Q1 :
The keyboard does not respond accurately.
A1a: Re-install the keyboard. Unplug the keyboard from the
Console Port and plug it back again.
A1b: Re-install the Smart View KVM Switch. Shut down the
PCs, unplug the cables from the Smart View KVM
Switch and wait for five seconds. Then plug the cables
back and activate the PCs.
A1c: When under Auto Scan Mode, please press [Esc] key
to escape.
A1d: PCs can’t supply the power to Smart View KVM
Switch. Please must attach a power adapter of DC9V
with positive central polarity.
A1e: Try another keyboard.
Q2 :
The mouse does not respond accurately.
A2a: Re-install the mouse. Unplug the mouse from the
Console Port and plug it back again.
A2b: Re-install the Smart View KVM Switch. Shut down
the PCs, unplug the cables from the Smart View
KVM Switch, and wait for five seconds. Then plug
the cables back and activate the PCs.
A2c: Try another mouse.
Q3:
The mouse is out of control.
A3: The characteristic of the mouse is inefficient. Try
another superior mouse and plug it back again. Start
the operation after hearing the beep sound.
Q4:
A4:
Why the green light of LED display is on and red
light keeps flashing after shutting down the PC?
The condition is normal and caused from the PC
default. The condition will not affect the regular
operation of Smart View KVM switch.
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.
-7-
Loading...