Tran former
TM
EXPANDABLE B LUE TO OTH
SPEAKER
+
Expandable for i ncreased bass and
louder soun d
Suction cup for versatile mounting
Vibration actio n turns most large
surface i nto a subwoofer
Drop proof, Splashproof, and Dirtproof
Lanyard loop and detach able clip for
easy transport – just clip and go
Adjustable to di fferent sizes and shapes
Power Switch
Micro USB
Suction Cup
Microphone
Lanyard Loop
LED
Triangle
Handle
Vol + Button
Bluetooth
Button
Vol - Button
Automatic Power Off: The Expandable
Bluetooth Speaker will automatically switch off
to preserve battery power when Bluetooth is
disconnected for 5 minutes.
To turn it on again, please hold down the
power button for about 1 second.
To turn of the speaker manually, please hold
down the power button for about 2-second
until the LED light flashes red.
BLUETOOTH PAIRING
Your speaker can sync wirelessly with most
Bluetooth enabled devices. The speaker will
automatically search for previous connections
when it is initially tu rned on. If a connection is
lost, the speaker will look to re-establish that
connection again, but will not automatically
look for the device again if the Bluet ooth
connection is turned off on the device until
the speaker is turned off and then turned on
again. If the device goes out of range and then
comes back into Bluetooth range, the speaker
will automatically re-establish the connection.
Make sure that the speaker is turned on.
1
The blue LED light will flash rapid ly
indicating that the power is on.
Turn on Bluetooth on your device and
2
place it in pairing mode (check your
device’s manual to find out how to add a
new device to your device th rough
Bluetooth).
Place the speaker in pairing mode by
3
pressing and holding the Bl uetooth
button for about 3 seconds, until you
hear a sound
4
Select the speaker from the list of
discovered devices on your Bluetooth
device. Wait for a few seconds until the
connection is completed.
If the connection is successful, a tone will
5
sound on the speaker, and the blue LED
light will flash slowly.
6
Select a song, movie or game from your
media device and enjoy the audio via
Bluetooth from
Bluetooth Speaker.
your Expandable
BLUETOOTH CONTROLS BATTERY SUCTION CUP
Bluetooth Speaker: Pressing the
Bluetooth button once can stop/ pause
the music streaming. You can use the
volume “+” and volume “-“ buttons to
adjust the volume
Hands-free Conference Call: While your
phone is paired, you can answer a call by
pressing the Bluetooth button once an d
utilize the speakers hands-free
speakerphone mode. When the phone is
in idle, pressing the Bluetooth button
twice will redial the number.
for the speaker.
The speaker has a b uilt-in
rechar geable battery. When the
battery is low, the LED light will flash
red. Simply charge the speaker with
the included Mi cro USB. Charg ing time
is approximat ely 3 hours.
The average play time is 6 hours. You
can monito r the batter y usage on your
mobile devi ce.
To secure the speaker on a smooth surface
such as glass, follow the steps below:
1
Clean the surface and the bottom of the
suction cup with a wet cleaning cloth to
remove any particles of dust.
2
Press the center of the suction cup to the
surface while holding the speaker as
indicated in the picture, then release the
sides of the suction cup
1
2
3
Push the sides of the suction cup against
the surface in a complete circle to drive
the air out.
Warning: If the above steps are not taken
properly, the unit may not adhere
securely.
Releasing the Suction Cup: To release the
speaker, pull the triangle handle located
on the top of the suction cup. Please do
not attempt to pull from the top of the
speaker as this may result in damage to
the speaker.
3
VIBRATION ACTION
When the Expandable Bluetooth Speaker is
placed on a large surface, it can utilize the
surface to produce more bass. You can
experiment with diffe rent surfaces for different
sound frequencies.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Note: Modifications to this product will void the user’s authority to operate this equipment.
Loading...