SmartThings STSS ST001 Users Manual

SmartThings Manual

Welcome

Hi, and thanks for joining the SmartThings family. Please make sure you followed
the Getting Started steps in your kit. This user manual will give you some additional
info on the different SmartThings you may have in your SmartThings Kit. If you have
any questions at all, simply boot up your mobile app to talk to us directly or go to
www.smartthings.com.

Meet Your SmartThings

Depending on your SmartThings Kit, you may have a few different
SmartThings. They include: (WITH IMAGES AND CORRESPONDING MOBILE
ICON

SmartSense Open/Closed – Provides open and closed status notification when
installed on a door, window, cabinet, drawer or anywhere the two c omponents of the
contact sensor can be brought together or pulled apart.

SmartSense Motion – Detects Infrared (IR) Motion from large animals and people
when they enter the field of vision of the device.

SmartSense Presence – Detects if the holder of the device is within range of the
SmartThings Hub. Has a small speaker for identifying lost items (like keys or the
pet’s collar).

SmartSense Multi – Can detect angle in 3 axis, vibration, movement and
temperature.

SmartTag – Combines the SmartSense Presence with the SmartSense Multi into
one device.

Getting Around
Let’s take a look at each device.
IMAGES WITH CALL OUTS FOR EACH

 SmartSense Open/Closed (and Multi) – Magnet location (both sides). How to

take off the back. Access to batteries. Pairing button.

 SmartSense Motion – IR sensor location. Micro-USB power location. How to

take off the back and install batteries. Pairing button.

 SmartSense Presence (and SmartTag) – Rubber ring. Battery

access. Pairing button.

Installation

SmartThings work best if they are installed close by (within 50 feet) of the
SmartThings Hub, or have a pluggable SmartThing (SmartSense Motion,
SmartPower Outlet) in between the SmartThings Hub and the device. In all cases,
follow the getting started experience in the SmartThings mobile application for
instructions on how to pair your SmartThings to your SmartThings Hub and for
advice on installation.

To pair a SmartThings device to the SmartThings Hub, at the location of the Hub
press the ( + ) button, press Add SmartThings, and then press the button on the
SmartThing device one time quickly. You will see the LED flash.

To factory reset a SmartThing device in the event you want to add it to a new
SmartThings Hub, press and hold the button for 6 seconds. You will see the LED
flash.

Each SmartThings devices has its own power requirement. On first receipt, the
batteries may be inserted but will have a barrier that needs to be removed before
use.

 SmartSense Open/Closed (and Multi) – 2 x AAAA batteries.
 SmartSense Motion – Either 2 x AA batteries or pluggable via micro-USB.
 SmartSense Presence (and SmartTag) – 1 x CR2032 coin cell battery.

Certifications
Certified under FCC Part 15
Certified in Canada by IC to RSS-210
This Class B digital apparatus complies with Canadian ICES-003

Cet appareil numérique de la classe B est conforme à la norme NMB-003 d u
Canada.

SmartSense Presence FCC ID: R3Y-STSS-ST001, M/N: STSS-PRES­001,IC: 10734A-STSSST001

SmartTag FCC ID: R3Y-STSS-ST001, M/N: STSS-ST-001, IC: 10734A­STSSST001

SmartSense Open/Closed, SmartSense Multi and and SmartSense Motion contain
FCC ID: W7Z-ZICM357SP2, M/N: ZICM357SP2-1, IC: 8254A-ZICM357SP2