SmartThings STH ETH011 User Manual

Rhein Tech Laboratories, Inc. Client: SmartThings, Inc.
360 Herndon Parkway Model #: PGC422-C
Suite 1400 IDs: R3Y-STH-ETH011/10734A-STHETH011
Herndon, VA 20170 Standard: FCC 15.247/IC RSS-210
http://www.rheintech.com Report #: 2014175

Appendix K: Manual

Please refer to the following pages.

Page 46 of 58

Welcome

Are you ready to have a safer, smarter home in the palm of your
hand? If this is your first time with SmartThings, please follow
these instructions and review the “Let’s Get Started” card that
came with your SmartThings Hub.

1

Go to www.smartthings.com/start

Download the SmartThings Mobile

2

app for your mobile device

Follow the on-screen instructions

3

Have questions or need help? Chat with us live in the
SmartThings Mobile app, go to support.smartthings.com to
search our knowledge base, or email us at
[e-mail].

Meet Your
SmartThings™ Hub

The SmartThings Hub wirelessly connects all of your different sensors so that you
can receive messages about what is going on and use your smartphone to remotely
control different things in your home or office. Here's how:

It's Open

The SmartThings Hub speaks many different languages. In addition to sending
commands between the many SmartThings devices, the Hub can also
communicate with ZigBee, Z-Wave, IP, and other wireless protocols.

It Connects to the Internet

Plug the enclosed Ethernet cable into the Hub, and then connect it to your Internet
router. This creates a secure connection between the Internet and the SmartThings
Cloud.

It Communicates Information and Commands

When one of your connected SmartThings or compatible sensors has a message to
relay (for instance, if motion is detected or if a door opens), the SmartThings Hub
will receive that message from the sensor and send it to your phone. It also allows
you to send commands back to these devices, and lets the sensors talk to each
other (for instance, telling a light to turn on if motion is detected).

Hi!

Getting Around

The good news is that your SmartThings Hub does all the heavy lifting for
you, and it’s pretty simple. No buttons to worry about.

A. Power Port

Power port to be used with included power adapter and cable.

B. Ethernet Jack

Provides connectivity to the Internet using the included Ethernet cable.

C. Status Light

Lights to indicate the Hub’s status.

A

B

C

Welcome Code

There is an important code on the “Let’s Get Started” card that came in the box
with your SmartThings Hub. You’ll need your code for registration, and it looks like
the sample below.

You can find your Welcome Code on the “Let’s Get Started”
Card in your SmartThings Hub.

Installation

The SmartThings Hub works best if installed in a central location to where your
SmartThings will be connected. The recommended separation distance from the
user for this equipment is 7.6 inches (20 cm).

Avoid installing the SmartThings Hub near or inside sources of metal,
radio or electromagnetic interference.

Vermeiden Sie die Installation des SmartThings Hubs in oder in der
Nähe von Metall, Funkantennen oder anderen elektromagnetischen Störsendern

Éviter l'installation du Hub SmartThings a à proximité ou a à l’intérieur d’objets
métalliques ou de sources d’interférences radioélectriques ou électromagnétiques.

Please follow the instructions provided in the SmartThings Mobile App when
installing your SmartThings Hub, or go to support.smartthings.com if you have any
questions.

WARNING: No user-s erviceable par ts insi de. Ref er all se rvicing to
qualified service personnel.

Warnung: Keine Wartung einzelner Teile durch den Nutzer. Wenden Sie sich nur
an qualifiziertes Servicepersonal für Wartungen

Attention: l’équipement SmartThings ne doit être en aucun cas ou vert par l’utilisateur
luimême. Pour l’entretien et/ou la maintenance, contacter le personnel qualifié.

Three Critical Steps to Install

Connect your SmartThings Hub to your Internet router using the

1

included Ethernet cable.

Connect your SmartThings Hub to power using the provided

2

power suppl y.

ABC123

ëABCDEFJî

SAMPLE

Lost your Welcome Code? Contact [e-mail] and we’ll
recover it for you.

Register your SmartThings Hub to your account using our mobile app.

3

Once you’re up and running, adding SmartThings to your world is easy. Enjoy!