Welcome to your
Setup
Button
Make sure the Button is within
1.
15 feet (4.5 meters) of your
SmartThings Hub or SmartThings
Wifi (or compatible device with
SmartThings Hub functionality)
during setup.
Use the SmartThings mobile app to
2.
select the “Add device” card and
then select the “Remote/Button”
category.
Remove the tab on the Button
3.
marked “Remove When Connecting”
and follow the on screen instructions
in the SmartThings app to complete
setup.
TroubleshootingPlacement
Connect button
LED Light
The Button can control any connected
devices at a touch of a Button.
Simply place the Button on the table,
desk, or any magnetic mating surface.
The Button can also monitor
temperature.
Hold the “Connect” button with a
1.
paperclip or similar tool for 5
seconds, and release it when the
LED starts blinking red.
Use the SmartThings mobile app to
2.
select “Add device” card and then
follow the on-screen instructions to
complete setup.
Back Front
If you’re still having trouble connecting
the Button, please visit
Support.SmartThings.com for assistance.
Loading...