SMART Technologies WC8A Users Manual

Wireless Connection for SMART Board™ X800 Series
Interactive Whiteboards
2
Thank you for your recent purchase. In the unlikely event that you have problems with your equipment, SMART’s technical support personne l are available to assist you. The terms and conditions of SMART’s warranty are set forth below – please review them carefully. Please see the reverse side of this page for warranty-claim procedures.
Limited Warranty to End-User Purchaser
The duration of the Warranty (the “Warranty Period”), commencing on the date of new purchase, is ONE YEAR for optional accessories (including room control modules, wireless serial or USB connections, floor stands, speakers, cables, USB adapters, keyboards, etc.) and service
Fully discharged SMART Slate™ lithium ion batteries are not covered by warranty.
Projector lamps (used under normal projector operating conditions, not in excess of 8 hours per day and 260 days per year) are
covered by warranty for 500 hours or 90 days, whichever comes first.
THE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPL IED OR STATUTORY, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PAR TICULAR PUR POSE. ANY REPRESE NTATION OR WARRANTY, OR AFFIRMATION OF FACT, MADE BY ANY SALES REPRESENTATIVE OR OTH ER AGENT OF SMART , INCLUDING BUT
NOT LIMITED TO STATEMENTS REGARDING CAPACITY, S UITABILITY FOR U SE OR PERFORMAN CE, EX PRESS OR IMP LIED,
WHICH IS NOT SPECIFICALLY SET FORTH HEREIN WILL NOT BE BINDING UPON SMART.
SMART has not authorized any other party to alter, modify, extend, enhance or limit the Warranty and SMART will not assume any responsibility or liability for any statements or representations made by any other persons or entities.
Repair or Replace
The Purchaser’s exclusive remedy and SMART’s sole obligation during the Warranty Period shall be for SMART to repair or, at its option, replace the Equipment that has failed or that has proven to be defective at no cost to the Purchaser except for the one-way shipping cost of the Equipment to a SMART-authorized service center. Any charges associated with a rush-requested order, such as air express, are the responsibility of the Purchaser. Prior to returning purchase date and must thereafter obtain from SMART a Return of Merchandise Authorization (RMA) number. The RMA number shall be clearly marked on the packaging of the Equipment being returned. All returned Equipment that is replaced under the Warranty shall become the property of SMART.
Limitation of Damages
The liability of SMART to the Purchaser arising out of the purchase and supply of the Equipment or its use, whether based upon Warranty, contract, tort (including, without limitation, negligence) or otherwise, shall not in any case exceed the original cost to the Purchaser of the Equipment, and upon expiration of the Warranty Period such liability will terminate.
SMART shall not be liable, whether in contract or on any other basis, for any damages sustained by the Purchaser or any other person arising from or related to loss of use, failure or interruption in the operation of the Equipment, delay in repair or replacement or for incidental, consequential, indirect or special damages or liabilities, loss of with the sale, lease, maintenance, use, performance failure or interruption of the Equipment.
Warranty Exclusions
Third-Party Equipment Warranty Extension and Exception
For equipment sold by SMART to the Purchaser but manufactured by a corporation other than SMART (such as wall-mounted cabinets, carrying cases and other specified components), SMART shall extend to the Purchaser, to the extent permitted, any and all applicable warranty provisions provided to SMART by the third-party manufacturer. The extension of any and all applicable third-party manufacturer warranty provisions shall be an exception to this Warranty and represents SMART’s sole responsibility with respect to such equipment.
Limited Equipment Warranty
repair parts, with the following exceptions:
any equipment under the Warranty, the Purchaser must render proof of the original
revenue, loss of business or other financial loss arising out of or in connection
from SMART. If the Equipment is received by the
#2
1
SMART Technologies ULC
SBX
VVVQYDDDBXXXX
800 CAT5-XT
*VVVQYDDDBXXXX *
Ca ut i on
Thi s Is N 5 0
ot
'/
15. a Net
2 m Ma
20-01246-XX
wo r x.
k Co Cabl n n e
e
ct L en
ion
gt
h
www.smarttech.com/Support/WC8FirmwareUpdate
3
SMART Technologies ULC
SBX800 CAT5-XT
VVVQYDDDBXXXX *VVVQYDDDBXXXX *
Caution
Thi s
Is Not a Network Connection
50'/15.
2m Max. Cable Len
20-01246-XX
gth
SMART Technologies ULC
VVVQYDDDBXXXX
*VVVQYDDDBXXXX *
Caution
This Is Not a Network Connection
50'/15.2m Max. Cable Length
20-01246-XXSBX800 CAT5-XT
4
SMART Technologies ULC
SBX800 CAT5-XT
VVVQYDDDBXXXX
*VVVQYDDDBXXXX *
Caution
6 7
SMART Technologies ULC
VVVQYDDDBXXXX
*VVVQYDDDBXXXX *
Caution
This Is Not a Network Connection
50'/15.2m Max. Cable Length
This Is Not a Network Connection 50'/15.2m Max. Cable Length
20-01246-XX
20-01246-XXSBX800 CAT5-XT
5
B
A
8
PLEASE T HI NK BEF OR E Y OU PRI NT
SMART Board™ X800 Series Interactive Whiteboard
User’s Guide
?
A
9
< 30' (9.1 m)
smarttech.com/kb/144817
B
2 – 10 sec 10 – 40 sec
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Hardware Environmental Compliance
SMART Technologies supports global efforts to ensure that electronic equipment is
manufactured, sold and disposed of in a safe and environmentally friendly manner.
Waste Electrical and Electronic Equipment Regulations (WEEE Directive)
Waste Electrical and Electronic Equipment regulations apply to all electrical
and electronic equipment sold within the European Union. When you dispose of
any electrical or electronic equipment, including SMART Technologies products,
we strongly encourage you to properly recycle the electronic product when it
has reached end of its life. If you require further information, please contact
to contact.
Restriction of Certain Hazardous Substances (RoHS Directive)
This product meets the requirements of the European Union’s Restriction of Certain Hazardous
Substances (RoHS) Directive 2002/95/EC. Consequently, this product also complies with other
regulations that have arisen in various geographical areas, and that reference the European
Union’s RoHS Directive.
Packaging
Many countries have regulations restricting the use of certain heavy metals in product
packaging. The packaging used by SMART Technologies to ship products complies with
packaging laws.
U.S. Consumer Product Safety Improvement Act
The United States has enacted the Consumer Product Safety Improvement Act which limits
the lead (Pb) content in products. SMART Technologies is committed to complying with this
initiative.
your reseller or SMART Technologies for information on which recycling agency
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonc­tionnement.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
You can determine whether the equipment is causing interference by disconnecting it from your computer. If the interference stops, it was probably caused by the equipment. If the equipment does cause interference to radio or television reception, you may be able to correct the interference by using one or more of the following measures:
• Rotatethetelevisionorradioantennauntiltheinterferencestops.
• Movetheequipmentfartherawayfromthetelevisionorradio.
• Plugtheequipmentandcomputerintoanoutletthatisonadifferentcircuitfromthe
television or radio.
If necessary, consult SMART Technologies ULC or an experienced radio/television technician for help.
ChangesormodicationstothisproductnotauthorizedbySMARTTechnologiesULCcould voidtheFCCCerticationandnegateyourauthoritytooperatetheproduct.
*99-01147-20-A1*
www.smarttech.com/support www.smarttech.com/contactsupport Support +1.403.228.5940 or Toll Free 1.866.518.6791 (U.S./Canada)
© 2010 SMART Technologies ULC. All rights reserved. SMART Board, smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of SMART Technologies ULC in the U.S. and/or other countries. All third-party product and company names may be trademarks of their respective owners. Patents pending. Contents are subject to change without notice. 02/2011.
99-01147-20 A1
Loading...