SMART Technologies WC602, WC601 User Manual

User Manual for SMART Board Interactive Whiteboard

Wireless Adapter Product WC6

(Models GU3706 and GU3705)

FCC Warning

This device complies with Part 15 of the FCC rules. Operation is subject to the

Following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired
operation.

This device, GU3705, and its antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter.

Changes or modifications to this equipment not expressly approved by SMART Technologies may void the
user’s authority to operate this equipment.

These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at his
own expense.

Trademark Notice

SMART Board, the SMART logo and smarttech are trademarks or registered trademarks of SMART
Technologies ULC in the U.S. and/or other countries. Bluetooth is a trademark owned by Bluetooth SIG,
Inc. and is used by SMART Technologies ULC under license. Windows and Microsoft are either registered
trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Mac is a trademark
of Apple Computer, Inc., registered in the U.S. and other countries. Phillips is a registered trademark of
Phillips Screw Company. Sanford, EXPO and EXPO2 are registered U.S. trademarks of SANFORD or its
Affiliates. All other third-party product and company names may be trademarks of their respective owners.

Copyright Notice ©2009 SMART Technologies ULC. All rights reserved. No part of this publication may
be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language in any
form by any means without the prior written consent of SMART Technologies ULC. Information in this
manual is subject to change without notice and does not represent a commitment on the part of SMART.

Portions of the software that ships with this product are copyrighted by Intel Corporation.

Portions of the software that ships with this product are copyrighted by Paragraph, a business unit of
Vadem.

Patent No. US5448263; US6141000; US6320597; US6326954; US6337681; US6741267, US6747636;
US7151533; US7289113; US7499033; CA2058219; and CA2252302. Other patents pending.

Wireless Kit:

The wireless Bluetooth connection kit uses Bluetooth technology to enable you to wirelessly connect your
interactive whiteboard to your computer. The expansion module also powers your interactive whiteboard
with its external power supply.

In addition to the external power supply, the wireless Bluetooth connection kit consists of the following
two key components:

• GU3706 a Bluetooth-to-USB expansion module that connects to the controller module

• GU3705 a Bluetooth-to-USB converter that connects to your computer

Caution

Use only the power supply included with the wireless Bluetooth connection kit. Using other power supplies
might create a safety hazard or damage the equipment. Although your interactive whiteboard won’t be
damaged if you connect a power supply with a negative voltage on the connector's tip to the controller
module, a computer or extender connected to the USB interface might be damaged by reverse polarity.

Notes:

• Follow the procedures outlined in this section only if your interactive whiteboard is fitted with the
optional wireless Bluetooth connection expansion module. Refer to appendix A for pictorial view of
installing wireless modules.

• This option isn’t available for Dual Touch SMART Board SBD600 series interactive whiteboards.

• The SMART Board interactive whiteboard Bluetooth-to-USB converter can’t be used as a general­purpose USB-to-Bluetooth adapter. It only works with the SMART Board interactive whiteboard
Bluetooth-to-USB expansion module.

CONNECTING YOUR INTERACTIVE WHITEBOARD TO YOUR COMPUTER

Before setting up the wireless Bluetooth connection,

• Remove all versions of SMART Board software, SMART Notebook software or SMART product drivers
installed on your computer, and then install the version of SMART product drivers included with the
wireless Bluetooth connection kit, even if it’s the same version. Reinstalling this software ensures that you
enable all of its necessary features. If you don’t know how to remove software, ask your system
administrator. Refer to page 29 of SMART Board™ 600 and SBD600 Series Interactive “Whiteboard
Installation and User’s Guide” for details on installing SMART product drivers.

• Ensure that your computer can communicate with your interactive whiteboard using a wired USB
connection by connecting the included USB cable as described on page 27 SMART Board™ 600 and
SBD600 Series Interactive Whiteboard Installation and User’s Guide. This step enables you to check that
SMART product drivers and the installed firmware version support the wireless Bluetooth connection kit.

• Verify that you have controller firmware 2.0.6.0 or later installed on your interactive whiteboard, as
described in the following procedure.

To verify the firmware version:

1. If SMART Board Tools isn’t already running, select Start > All Programs > SMART Technologies >
SMART product drivers > SMART Board Tools.

2. Click the SMART Board icon in the Windows notification area or Mac Dock, and then select Control
Panel. The SMART Notebook control panel opens.