Page 1
SMART Board® 8070ie-SMP interactive at panel cabling guide
Your SMART Board 8070ie-SMP interactive at panel with
appliance includes the following:
• four terminal connection panels, enabling you to connect
speakers, the included appliance, a guest laptop, cabling
for another guest laptop (installed solution) and other
peripheral devices, such as DVD/Blu-ray ™ players and
VCRs.
• SMART Meeting Pro™ software.
• a SMART GoWire™ auto-launch cable with SMART
Meeting Pro software to connect to a guest laptop.
• a CAT 5 USB extender to extend your USB connection up
to 52' (16 m).
SMART Board 8070ie-SMP
interactive display
CAT 5 USB extender
(CAT5-XT-1100)
SMART GoWire
cable
Speakers
SBID 8070ie-MP appliance
For cautions, warnings and other important product information see Important information for your
SMART Board™ interactive display ( ).
smarttech.com/kb/170132
Standard cable connections
Side laptop
connection panel
Audio connection
panel
f
Included cables
Power (country-specific)a
e
USB
Required cables
(not included)
h
Cat 5
52' (16 m)
HDMI
j
VGA
Appliance power
b
c
(country-specific)
4 1/2' (1.4 m) 13' (4 m)
f
CAT5-XT-1100
Optional cables (not included)
m
h
Cat 5
52' (16 m)
DVI
k
VGA to RGB/HV
j
HDMI
d
g
SMART GoWire
n
RS-232
CAT5-XT-1100
p
q
SMART GoWire
VGA
Appliance
smarttech.com/kb/170166
Inside
connection
panel
e
1
h
< 52' (16 m)
f
g
j
2
c
b
a
HDMI
smarttech.com/support
smarttech.com/contactsupport
© 2012 SMART Technologies ULC. All rights reserved. SMART Board, SMART Meeting Pro, SMART GoWire, smarttech, the SMART logo and all SMART taglines are
trademarks or registered trademarks of SMART Technologies ULC in the U.S. and/or other countries. All third-party product and company names may be trademarks of
their respective owners. One or more of the following patents: US6320597; US6326954; US6563491; US6741267; US6803906; US6829372; US6947032; US6954197;
US6972401; US7151533; US7236162; US7411575; US7619617; US7643006; US7692625; US7755613; US7757001; US7880720; USD612396; USD616462; USD617332;
and USD636784. Other patents pending. Contents are subject to change without notice. 05/2012.
*1018099*
1018099 Rev 01
Bottom connection panel
1
Guest laptop
Page 2
SBID 8070ie-MP appliance
For cautions, warnings and other important product information see Important information for your
SMART Board™ interactive display ( ).
smarttech.com/kb/170132
Alternative cable connections
Audio
connection
panel
Side laptop
Remotelymanaging your
SMART Board™8070i
interactivedisplay
ConnectingyourinteractivedisplaytoanR S-232system 2
Connectiondiagram
2
Serialinterfacesettings
3
Powermodes
4
RS-232programmingcommandsandresponses
4
Interpretingthe“invalidcmd”response
5
Commandinventory
5
Designatingvideoinputsourcecommandsfor a specific video input
6
Designatingatargetinteractivedisplay
7
Commandsandcontrols
8
Powerstatecommands
8
9
Videoinputsource
Videosourcecommands
10
Audiooutputcommands
13
Systeminformationcommands
14
Serviceinformation
18
Thisdocumentincludesdetailedinstructionson how toset up your computeror roomc ontrolsystem
n
Room
control
toremotelymanageyourSMART Board™8070iinteractive displayusing an RS-232serial interface.
1
smarttech.com/kb/160469
connection panel
The USB drive connects
to the appliance.
Speakers
Appliance
p
smarttech.com/kb/170166
h
Inside
f
Extending
1
USBConnections
SMARTBoard®800seriesinteractive
whiteboardsandsystems
smarttech.com/kb/170166
h
smarttech.com/kb/170157
connection
panel
< 52' (16 m)
f
< 52' (16 m)
p
OR OR
k
e
1
m
j
g
q
j
2
c
b
a
USB 2 HDMI/DVI
HDMI
1
2
HDMI
HDMI
SMARTNotebook10.8SP1 collaborative learning softw are,SMA RT Meeting Pro 2.3 software and SMART
Product Drivers10.8
Touch inputconnection Defaultvideo inputconnection
USB1
VGA
RGB/HV
USB3
HDMI 2
ther thanthedefault,you can change the video input settings in the Video and Touch Input Se ttings
Page1of 3Configuringthevideo and touch input for your SMART Board 8070i interactive display (...
2/5/2012http://www.smarttech.com/us/Support/Browse+Support/Support+Documents/KB4/170065.a
...
CopyrightSMARTTechnologies.All Rights Reserved.Header
Configuringthevideoand touch inputforyourSMART Board 8070 i interactive display
SMART hardware SMARTBoard8070iinteractive displays
SMARTsoftware
Operatingsystems WindowsoperatingsystemsandMac OS operating system software
Overview
Youcanconnectyour SMART Board 8070i interactive display to up to three com puters at once. Each computer must be connected to the interactive
display
witha USBcable for touchinput and a video cable for video input.
The followingtableshowsthe default touch input and video input pairings.
Computer
Roomcomputer
Guestlaptop USB2
Sidelaptop
Ifyou want tousea video and touch input pairing o
windowof theSMARTcontrol panel.
NOTE
Ifmultipleinteractivedisplays are connected to your room computer, disconn ect all but one of the interactive displays, and then configure the interactive
oneata time.
displays
Details
Using thecomputerthat’sconnected to the USB 1 connection, configure the video input for ea cht ouch input connection using the Video and Touch Input
Settings
window.
IMPORT ANT
You must have the latest version of SMART No tebook software or SMART Meeting Pro software installed on the computer connected to USB 1.
The
interactivedisplaystatuslight must be green or flashing green.
The interactive display cannot be in Eco -Standby mode.
DVI
a
VGA
DVI
smarttech.com/kb/170065
Bottom connection panel
Guest laptop (USB 2)
Guest laptop (USB 3)
Loading...