Quick reference
CAS-360 Control Unit top view
LCD screen
Power Control dial
CAS-340 Control Unit top view
USB
Connect your computer here.
Auxiliary inputs
Connect your SMART Board™ interactive
whiteboard projector to Aux In 1, and any
other audio input to Aux In 2.
Power in
System reset
Hold for three
seconds to reset
the system.
Room
connection
Connect your
Room Module
here.
Line out/ALS out
Connect a recording feed or
an assistive listening device
here.
CAS-340 and CAS-360 Control Unit bottom view
Power
SMART Audio™ classroom
amplification system
Models CAS-340 and CAS-360
99-01140-20 A0
2 | QUICK REFERENCE – SMART AUDIO CLASSROOM AMPLIFICATION
Soft button
Press to mute auxiliary
audio input at the Control Unit.
Refer to the user’s guide for
customization instructions.
Volume up
Press to increase the microphone
volume.
Mute/Power off
Press to mute the microphone.
Press for four seconds to turn the
microphone off.
Volume down
Press to decrease the microphone
volume.
To adjust auxiliary input volume
Press the mute button, and then
press the volume buttons to adjust
volume for auxiliary audio inputs
connected to the Control Unit.
Status light
•Green — On
• Green blinking — Muted
• Red — Low battery
• Red blinking — Charging
• Amber — Programming
Microphone input
3.5 mm jack for
optional external
microphone input.
Auxiliary input
3.5 mm jack for MP3
player or other audio
source.
To turn on the microphone
Press any button for one second.
To turn off the microphone
Press the mute button for four
seconds.
Microphone
To charge the
microphone
Place the microphone
facing forward in the
microphone charging
cradle after each use.
To customize the microphone
Press both volume buttons until
the status light flashes amber.
Refer to the user’s guide for
more information.
SYSTEM
www.smarttech.com/support www.smarttech.com/contactsupport
Support +1.403.228.5940 or Toll Free 1.866.518.6791 (U.S./Canada)
© 2010 SMART Technologies ULC. All rights reserved. SMART Board, the SMART logo, smarttech, SMART Audio and all SMART taglines are trademarks or registered trademarks of
SMART Technologies ULC in the U.S. and/or other countries. All third-party product and company names may be trademarks of their respective owners. Contents are subject to change
without notice. 12/2010.
99-01140-20 A0
Loading...