SmartTalk HSM-300Z User Manual

Power

5V-24V 1A

Signal

908.42Mhz(US), 868Mhz(EU)

Range

Up to 100 feet line of sight between the wireless controller

Program button

To include/exclude the HSM-300Z.

HSM-300Z

1. Introduction

The HSM-300Z is a multi function IO module of Z-Wave. The HSM-300Z provides digital outputs to
enable up/down/stop control over projector screen or window shades. It can be connected to relay
board to control up to four channels.

In addition, it can connect to up to four digital input channels as well.

Z-Wave Curtain Control Adapter

Figure 1 Outlook of the HSM-300Z

2. Specifications

1

Status
LED A

Status
LED B

Program Button

HSM-300Z

3. Installation

Z-Wave Curtain Control Adapter

Inclusion

Please enter to the learning mode of HSK-100Z, and Press & hold the program button of

HSM-300Z for 3 seconds and release it to complete the setting. Please following the steps:

1. Please open the cover located in the back of HSK-100Z to the back panel. You will see

Figure 2 Setup Keys of the HSK-100Z

2. Press "ADD" button in Advance Setup keypad.

3. Press "DEVICE" button.

4. The OK LED will be on.

5. Press & hold the program button of HSM-300Z for 3 seconds and release it.

6. The OK LED will blink.

2