Smartree Technology SM32 User Manual

Fee db ack (scre eching, stac)
*Th e camera and m onito r may b e too clo se tog eth er; *Th e volum e on the mo nitor m ay be s et to o high; *Pr ess the rese t key at the b ack of Paren t uni t;
Cannot he ar t he baby on t he parent unit
*Vol ume se ng may be too lo w; *Pr ess the rese t key at the b ack of Paren t uni t;
Image f rozen
*Re sta rt the ba by unit ( plug ou t the ada pte r then plu g it into t he so cket aga in); *Pr ess the rese t key at the b ack of pa rent unit (hi de behi nd the stand );
All rights res erv ed
2.4G H z Di gi ta l Wireless Video Baby Monitor
The features described in user ’s manual are subject to modifications without prior notice.
WA RNIN G:
Keep the small parts from away children
11
Printed in China
User Manual
WA RNIN G:
Keep t he s mall pa rt s from aw ay c hildr en
The features described in user ’s manual are subject to modifications without prior notice.
Thank you for purchasing this ba by m onitor . We will try to give you the
Rec harge ab le ba er y for mon itor
Mod el:50 3450;
3.7 V, 950 m Ah, 3.5 15Wh ;
Ope rang me wi th ba ery ful ly char ged (pa rent un it)
Up to 1 2 hours ( ECO o n) Ima ge sens or type
1/6.5 '’ C ol or C MOS im age sensor
IR LED Type
940 nm
FC C ID
RX:2A KV Z-SM32R X; TX:2A KV Z-SM32T X
No re ce pon on
the monitor
*Th e power a dapters may not b e pro perly con necte d; *Co nfirm th at the ca mer a and mon ito r are ON ; *Ca mera may b e far away f rom t he moni tor; *C ame ra an d m oni to r m ay no t b e p ro per ly pai red; follo w PA IRI NG in str ucon s; *Re sta rt Baby u nit and Parent un it; *Pr ess the rese t key at the b ack of Paren t uni t;
In ter feren c e or poor re cepon
*Mo ve the mo nitor c los e to the ca mera; *Th e camera or mo nitor m ay be p laced t oo clos e to ma ny me tal o bject s; *Ot her ele ctron ic devi ces m ay be interferi ng wit h the sig nal; *Th e baer y power may be too lo w; *Re sta rt Baby u nit and Parent un it; *Pr ess the rese t key at the b ack of Paren t uni t;
best products and service .
Congratulaon!
Now you can take care of your babies anywhere and anyme ! Plea se rea d the user manual before you use ! Please retain your original dated sale s rece ipt for your records. For warranty service of your baby monitor, you wil l need to provid e a co py of your dated sales receipt to confirm warranty status. Registraon is not required for warranty coverage. Before you use the product, we re commend you to fully charge the baery in the parent unit, so t hat it connues to work if you disconnect it from th e powe r supply to carry it to another locaon. Please read the Safety instrucons.
Please make sure you have the following in th is packing.
1. Parent unit x 1 ;
10. TROUBLE S H O OTING
2. Baby unit x 1;
3. Adapter x 2;
4. User manual x 1;
1. S A F E T Y INST R U C T I O I N S : CAU T I O N : Keep sma ll p arts away from children. Stran gulao n Hazard: Children can become entangled in cords.
Power cords should be ke pt m ore than 3 feet away from the crib and baby's reach all the me. Baby monitors and cameras with power cords should never be hung on or near the crib. This product is not a toy and shoul d be kept out of children's reach. This product contai ns s mall parts. Exercise care when unpacking and assembling he product. Read and keep instrucons: All th e safety and opera ng instr ucons should be read befo re the video b ab y mo nito r is o perated.
1 10
8.5 TEMPERATURE U N I T SETTING
Fre qu ency
2.4 GHz FH SS
Type o f Modui aon
GF SK
Transmi ng Powe r
18d Bm Max
Ope raon Envi ron ment
Ind oor use o nly; Temp erature: 0 -40 °C ; Hum idity : 5% to 90% r h. ( re lave h umi dity)
Ope rang Rang e
Up to 9 00 fe et (stra ight li ne and op en spac e)
Power adapter
Inp ut: 100 -240VA C 50 / 60Hz ,300m A Max;
Out put: 5V, 700m A;
LC D
3.2'' TFT LCD
1. Press the Menu/Eixt ke y an d the menu will pop up;
2. Press the L E F T key or RIGHT key unl the te mperature icon is highlighted then press OK key to enter into sub- me nu;
3. Press Le key or R ight key to select between or ;
4. Press O K key to confir m;
8.6 BRIGHTNESS S ET T I N G
1. P re ss the Menu/Eixt key and the men u wi ll pop up;
2. P re ss the LEFT key or R I G H T key unl t he brightness icon is highlighted then press O K key to enter into sub-menu ;
3. P re ss Le key or R ight key to s elect desired brightness level ;
4. P re ss OK key to confirm;
9. T E C H N I C A L D ATA
9.1 System General
9
This product cannot replace responsible adult superv ision. Water and moisture : Th is produ ct is designed for i ndoor use only. The unit
should not be exposed to rain, moisture , dr ipping or splashing. No objects filled wit h li quid should be placed on top of, or beside the product,
such as a glass or vase. This item should no t be u sed near water. DO N OT: Use the appliance if the cord or plug is damaged . If your baby monitor is not operang prop er ly o r has suffered any damage, contact s er vice center to request inspec on a nd rep ai r it i n orde r to avoid any p ossible risk. DO N OT: Aempt to rep air or adjust any of the e le ctrical or mechanical funcons of the un it s ince, if you d o, the gua rantee will be made void. Venlao n: This baby monitor should not be used on a be d, s ofa, rug or
similar surface that may bl ock the ve n laon op enings, or be placed in an enclosed area, such as a bookcase or drawer that may impede air flow. Kee p away from sourc es o f heat : Th is unit should not be exposed to direct heat sources such as a candle, replace, rad iator, heat register, stove or other appliance that emits heat. The uni t sh ould not be le in direct sunlight. Power sou rce: This un it should only be used with the AC power adapters included in this pac kage (rated 5V 600m A) .
Damage requiring service: This u ni t should be serviced by qua li fied person ne l . FCC STATEMENTS: This devic e comp li es with part 15 of the FCC R ules. O peraon is subject to the following two condions:
(1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause un desire d op eraon. NOT E 1 : This equipment has been tested a nd found to comply with th e li mi ts for a C la ss B digital device, pursu ant to part 15 o f th e F C C Rules. Th es e limits are designed to provi de reaso na ble protecon against harmful interference in a residenal installaon. This equipment generates, use s an d ca n radiate rad io f requ en cy energ y an d, if not installed and used in accordance with the instrucons , may cause harmful interference to ra dio co mm unica on s. However, there is no
2
guara ntee that interference will not o ccur in a parcular installaon. If this equipment does cause har mful i nterferen ce to radio or television recepon, which can be determined by turning the equipme nt off an d on , the user is encouraged to t ry to correct the interfe rence by one o r mo re of the fol lowing measures:
- Reo rient or relocate the receiving antenna.
- Increase the separao n betwee n the equipment and receiver.
-Connect the equip me nt i nto an outlet on a circuit differe nt f rom that to which the receiver is connected.
-Consult the deale r or a n experi en ced radio/ T V technician for help. NOT E 2 : Any changes or mod ifi caons to this uni t not expressly approved by the party responsible for compliance could void the user's author it y to operate the equip me nt .
4. Press O K key to confir m;
8.2 ALARM S E T T I N G
You can use the alar m to remind yourself to feed baby /change diapers / sleep, etc.
1. Press the Menu/Eixt ke y an d the menu will pop up;
2. Press the L E F T key or RIGHT key unl the alarm icon is highlighted then press OK key to enter into sub- me nu;
3. Press L e key or pre ss Ri ght key to se lect desired alarm;
4. Press O K key to confir m;
Note : If the alarm is ringing and no on e to answer, then th e ri nging will last 1 minute and then stop , aer 3 m in utes t he r inging will star t again. The ringing will sou nd u p three m es total if no one a ns wer.
FCC WA R N I N G
This equipment has been tested and fo und to compl y wi th the limits fo r a Class B digital device, pursuant to Part 15 of th e F C C Rules. Thes e li mits are designed to provide rea sonable protec o n against harmful interfe rence in a residenal installaon. T hi s equipment generates, uses and can radiate rad io f requ en cy energ y an d, if not instal le d and used in accord ance with the instrucons, may cause harmful inte rference to rad io com mu nicaons . However, th ere is n o gu arantee that inte rference will not occur in a par c ular insta lla on . If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipm ent of and on, the user is encouraged to try to co rrect th e interfere nce by one or more of the fol lo wi ng measure s: *Re orient or relo cate the receiving antenna. *Increase the separa on betwe en the equipment and the receiver. *Connect the equip me nt i nto an outlet different from that to which the receive r is con nected . *Consult the deale r or a n experi en ced radio/ T V technician for help.
8.3 LULLAB Y SE TTING
You can soothe the b aby to sle ep by pl aying a gentle lullaby from the baby unit.
1. Press the Menu/Eixt ke y an d the menu will pop up;
2. Press the L E F T key or RIGHT key unl the lullaby icon is highlighted then press the OK key to enter into su b- menu;
3. Press L e key or Right key to select desired lullaby;
4. Press O K key to confir m;
8.4 PA I R I N G T H E CAMERA A N D MONI TOR
1. Press the Menu/Eixt ke y th en the menu will pop up;
2. Press the L E F T key or RIGHT key unl the ca mera icon is highlighted then press OK key to enter into sub -m enu;
3.Press Le key or R ight key to select the desired camera to pair;
4. Press O K key to start the pairi ng ;
5. While the LE D is flashing then press the PAIR buon on the bac k of camera;
6. Once paired, then the screen will display the image from the camera.
7. If unsuccessful, plea se repeat above steps.
3 8
7.4 CAMERA V I E W / SCAN (only have paired t wo or more cameras have thi s fu ncon)
Press OK key to view / s ca n came ra; During scan mode, the scan icon will be disp layed on the top of screen. And each cameras' video will be stay on the LC D arou nd 1 0 seco nds then change to nex t ca me ra;
7.5 TA LK T O B A BY
To talk, pres s and hold the talk key on the front of the monitor. Rel ease the buon when you have finish ed talking to listen to the sound from the baby's room aga in . B ear in mind that you can 't listen to your baby whilst you're talkin g to them; to listen to it, you will have to stop pressing this buon.
7.6 INFRARED N I G H T VIS ION(A utom ac)
The infra red night visi on f uncon allows the camera to pick up im ages of your baby or the monitored area in dark or low light condions. In this mode, only bla ck a nd white i mage s will be displayed on the m on itor , the opmum image is 6 feet di stance between baby unit and o bject.
8. M E N U OPERATION
8.1 ECO S E T T I N G
This mode allows you to control the sou nd a cvaon of your baby monitor. The ECO default seng is O FF. If th ere is no so un d around t he cam era within 30 Seconds, it will stops trans mi ng. The monitor screen turns off when the camera is not transming. When the camera detects t he sound is louder than set sensiv it y level it will star t transmi ng t he signal to the monitor aga in .
To change the ECO level, please follow the next instrucons:
1. Press the Menu/Eixt key an d the menu will pop up;
2. Press the L E F T key or RIGHT key unl the the E C O icon is
ECO
highlighted then press O K key to enter into the sub-menu ;
3. Press the L E F T key or RIGHT key to se lect desired level ;
2. WARRANTY T E R M S
We take quality very ser io usly. This is why all of our products come with a one year wa rranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues p le ase contact t he store where yo u purcha sed , or contact the Ama zon seller.
3. Important guidelines for insta ll ing yo ur b aby mo nito r.
*To use your parent unit and baby unit together, you must b e able to estab lish a radio lin k be tween th em , and the range will be affected by env ironme ntal condions. *Any large metal object, like a refrigerator, a mir ror, a fillin g cabi net, metallic doors or reinforced concrete between the baby and parent unit may b lock the radio s ig nal. *The signal strengt h may also be reduced by oth er s olid str ucture s, like walls, or by radio or electrical equipment, such as T V, computers, cordl ess or mobile phones, fluorescent lights or dimmer switches. *Use of other 2.4GHz product, such as wi reless networks (Wi-Fi routers), Bluetooth systems, or microwave ovens, may ca us e interfere nce with this product, so keep the baby mon itor away at le ast 5 (1 .5m) fro m th ese types of products, or turn them off if they app ea r to be causin g interfere nc e.
4. P R O D U C T OV ERVIEW
4.1 Parent unit overview:
Pow er & Char ging LE D
Volu me LED
3.2 L CD Sc reen
Pow er key
Zoom
Talk to b aby
OK & S can
V+ / Rig ht key
Men u/Exit
V- / Lef t key
MI C
Spe aker
Res et key( under s tand)
DC- jack
7 4
4.2 Baby unit overview:
Spe aker
US B-Jac k
Tempe ratur e sen sor
CM OS sen sor
Inf rared L EDs
MI C
Lig ht sens or
Pai r key
4.3 ICONS O V E RVIEW:
---- Signal
---- Alarm
---- Lullab y
---- Camera
----- Volume
---- Bright ness
------ E CO
ECO
---- Baery
----- Zoo m
----- Night v ision
------ Talk to baby
— Temperature
28
5. P L A C E M E N T OF T H E BA BY MONITO R:
Aim to prov ide the viewing area: Select a locaon for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-signt to a stron g light source or dire ct sunlight. Avoid i nstalling th e ca mera where there are thick walls or obstrucons between the camera and the monitor. STRANGULATION H A ZARD--keep cord out of ch ild’s reach. Never place camera or cords withi n 3 feet of crib or pl aypen. NEVER use extension cords with A C adapters. o nly use the A C adapters provided.
6. Using the baby monitor
6.1 TURN O N THE B ABY UNIT:
*Only use the A/C adapter includ ed i n this packa ge (5V, 700mA); Use the provided A C a dapter to connect th e wall out let wi th t he baby unit; Once the adapter connects then the uni t wi ll turn on automaclly and the power LED will light up.
6.2 TURN O N THE PA R E N T UNIT:
*Only use the A/C adapter includ ed i n this packa ge (5V, 700mA); *The parent unit is supplied with a buil t-in rechargeab le L i-ion bae ry. We suggest to connect the monitor to the adapter plugged into the mains whenever possible, in order to keep the baery charged; Press and hold the power key on the Front side of the parent unit; Once parent unit turned on , the power L ED will light up and the image will display on the L C D s creen;
7.0 OSD M O D E OPERATION
7.1 PA R E N T U NIT S C R E E N ON / O FF
Short press the power key to turn on / off the screen.
7.2 VOLU M E ADJUS T M E N T
Press the Right key to increa se the volume; Press the Le key to decrea se the vol ume;
7.3 DIGITAL Z O O M & PAN / T I LT
Press Zoo m key to operate Zoom in / out;
At the Zoom mode , press the naviga on key to Pan/Til t th e image; During digital zo om mode, the zoo m icon w ill be displayed on th e top of screen. Warm reminder: If you want to adjust t he vol um e/Brightness, you have to exit the Zo om m ode before your operate it.
5 6
Loading...