Smart+ Products SPP-IF1500-MOFP Owners Installation And Operating Manual

Infrared Fireplace Heater

OWNERS INSTALLATION AND OPERATING MANUAL

Model: SPP-IF1500-MOFP

Safety Notice

Please read this entire Installation and Operating Manual BEFORE installing and using your new
Infrared Fireplace Heater. Failure to fully understand and follow instructions may result in property
damage, bodily injury, or even death.
If your Infrared fireplace heater is not used properly, a house fire may result. For everyone’s safety,
FOLLOW all Installation and Operating Directions. Infrared fireplace heaters have been designed
for use in the US and are suitable for mobile homes.

Save These Instructions

1

TABLE OF CONTENTS

Topic Page(s)

Introduction 3
Specifications 3
Safety Information 4-5
Fireplace Placement 6
Fireplace Operation 7
Troubleshooting and Fireplace Maintenance 8

*Contents in the box:

1. Infrared Fireplace heater

2. Instruction manual

3. Remote control (2 AAA batteries not included)

2

INTRODUCTION

Thank you for choosing one of the best Infrared absorption fireplace heaters available in the
market today. By using this infrared fireplace heater you can efficiently heat up to 1500
square feet! You can even turn down the main thermostat in your home and let this heater
carry some of the home heating duty. This fireplace heater is NOT intended to replace your
homes furnace; rather it is designed to be a supplement to it. It is not an instant heater – it
can take up to 24 hours for a room to reach the desired temperature. Our Infrared fireplace
heaters have been tested and listed for installation in residential and mobile homes by UL:

SPECIFICATIONS:

Electrical:

Voltage: 120v~60Hz
Power consumption: 1000-1500 Watts
Thermostat range: 50-90 Fahrenheit

Coverage:
Up to 1,500 square feet

Dimensions:

31.5” x 11.5” x 25.2”, 55 lbs

Safety Features:
Overheat shut off.

Features:

Remote control
Vivid Log/ Flame Effect
Eco Friendly Wood

3