Smart+ Products SPP-500-1WP Owners Installation And Operating Manual

1

OOWWNNEERRSS IINNSSTTAALLLLAATTIIOONN AANNDD OOPPEERRAATTIINNGG MMAANNUUAALL

SMART+ PRODUCTS Infrared Heater

Model: SPP-500-1WP

Safety Notice

Please read this entire Installation and Operating Manual BEFORE installing and using
your new Infrared Heater. Failure to fully understand and follow instructions may result in
property damage, bodily injury, or even death.

If the Infrared Heater in not used properly, a house fire may result. For everyone’s safety,
FOLLOW all Installation and Operating Directions.

2

Save These Instructions

TABLE OF CONTENTS

Topic Page(s)

Introduction & Specifications 3
Important Safety Information 4-5
Frequently Asked Questions 6-8
Heater Operation 9
Heater Placement 10
Users Guide 11
Air Filter Maintenance 12

3

INTRODUCTION

Thank you for choosing one of the best Infrared distribution heaters available on the
market today. Our Infrared Heater is a very safe and effective room heater. It produces
safe, clean and economical heat by utilizing quartz infrared heating elements. The heating
process of the Infrared Heater is similar to the way the sun warms the earth. The infrared
elements warm the heat chamber and the whisper quiet fan distributes the accumulated
warmth. This process is unique among heaters in that it minimizes wasteful heat collection
at the ceiling height of rooms and targets it toward the living space instead. Thank you for
being our customer, and enjoy your heater!

Our Infrared Heaters have been tested and listed for installation in residential and mobile homes
by ETL:

SPECIFICATIONS:

Electrical:

Voltage: 120V~60Hz,
Power consumption: 750/1500 Watts
Thermostat range: 50-90 Fahrenheit

Coverage:
Up to 750 square feet of unobstructed area

Dimensions:

16.5” x 13.2” x 16.5”, 25 lbs
Safety features:

Advanced Safety Overheat Shut Off
Features:

Remote Control
High/Low Heat Settings
Air filtration system
Lifetime Washable Filter

4

Run Timer
Eco Friendly Wood

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL INSTRUCTIONS, SAFETY WARNINGS,

AND FAQ’s BEFORE USING THE HEATER

WARNING!

! POTENTIAL FOR ELECTRICAL HAZARD IF NOT ADHERED TO!

When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electric shock, and injury to persons, including the following:

1. This heater must be plugged into a 120V, 15 amp (or more) circuit of its own. Nothing
else can be plugged into the same circuit. If unsure if your home meets this
specification, consult a certified electrician prior to use. Risk of fire, overheat,

malfunction, property damage, injury, or even death may result if not adhered
to!

2. Connect to a properly grounded, 3-prong outlet only. Do not connect the heater to
extension cords, surge protectors, timers, direct breakers, or an outlet with other
appliances connected to the same outlet. Risk of fire, overheat, malfunction,

property damage, injury, or even death may result if not adhered to!

3. This heater is hot when in use. To avoid burns, do not let bare skin touch hot
surfaces. Use handles (certain models) or wheels to move this heater.

4. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and
curtains from the front of the heater and keep them away from the sides and rear of
the heater.

5. Extreme caution is necessary when any heater is used by or near children, invalids,
pets, or when the heater is left operating unattended.

6. Always unplug the heater when not in use.

7. Do not operate any heater with a damaged cord or plug or after the